Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in White Plains, NY
Gate repair in White Plains covers everything from a sagging driveway gate on Mamaroneck Avenue to a dead opener on a slide gate off North Street. Most jobs run $180 to $650 depending on what failed, and we quote the exact number in writing before any work starts. If your gate won’t open, won’t close, or makes a sound like a garbage disposal eating a spoon, call Calder Gate Repair at (903) 417-0793 and a live person answers, day or night.
Why White Plains Homes Are Different
White Plains gates take a beating from the weather cycle, and they take it differently than gates in the Bronx or Yonkers. Winter ice expands in the hinge and track gaps, then spring thaw lets everything shift a few millimeters out of square. By early summer, that small shift becomes a gate that drags on the driveway or a limit switch that reads “open” when the gate is still six inches from the post. We see this pattern every year in the Highlands and around Battle Hill, where sloped driveways put extra lateral load on hinges and wheels.
Housing stock matters too. Older Tudor and colonial homes in White Plains often have narrow driveways with fencing built tight to the property line, so a gate that sags a few inches starts scraping the asphalt within weeks. Newer construction near the Westchester County Center tends to use heavier steel and aluminum gates paired with modern openers, which creates its own set of electrical and sensor issues. HOA communities like those near Saxon Woods require approvals for visible hardware changes, so we always flag that before ordering parts.
Our Main White Plains Services
Most White Plains homeowners call us for one of three problems: a gate that physically won’t move properly, an electrical fault somewhere in the power or safety system, or an opener that’s dead or half-alive. Each gets its own dedicated page here because the fix, the parts, and the price are different.
Gate Repair in White Plains
A gate that drags, sags, or sticks in White Plains usually has a mechanical cause: worn hinge bearings, a bent wheel track, or posts that frost-heave out of plumb over winter. We free the gate, identify the binding point, and replace only what’s worn, not what looks fine. On sloped properties in the Highlands, we add extra attention to wheel alignment so the gate rolls true. Most mechanical repairs are done in one visit. See Gate Repair in White Plains for full pricing and what a repair includes.
Electric Gate Repair in White Plains
Electric gates add wiring, safety sensors, and control boards to the mechanical equation, and New York winters are hard on all three. Water intrusion into junction boxes, corroded terminal strips, and safety loops that short after heavy rain are the usual suspects in White Plains. We trace the fault, quote the fix in writing, and get your gate back on power the same day in most cases. Read more about the electrical side at Electric Gate Repair in White Plains.
Gate Opener Repair in White Plains
When the opener motor runs but the gate doesn’t move, or the remote works only from three feet away, the trouble is in the operator itself. We service Gate Opener Repair for Linear, Viking, Ghost Controls, and DoorKing units across White Plains, including arm replacements, gear rebuilds, and control board swaps. If the operator is beyond saving, we won’t pad the bill; we’ll show you the failed part and give you a replacement price on the spot. The full breakdown is at Gate Opener Repair in White Plains.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in White Plains
We keep common parts on the truck for Linear, Viking, Ghost Controls, and DoorKing openers, which covers most residential gates in this part of Westchester. Less common components arrive within a day or two from our supplier network. That means most White Plains repairs finish in a single visit. See our brands for the full nine-brand list.
Pricing for Gate Company in White Plains, NY
| Service | Typical range in White Plains |
|---|---|
| Gate opener repair | $180 – $340 |
| Electric gate repair | $220 – $450 |
| Gate repair (mechanical) | $150 – $320 |
| Limit switch replacement | $130 – $210 |
| Safety sensor repair or replacement | $140 – $260 |
| Control board replacement | $280 – $520 |
| Remote programming or replacement | $60 – $140 |
| Gate wheel or roller replacement | $120 – $240 |
| Hinge replacement or adjustment | $110 – $200 |
| Chain or belt replacement | $150 – $300 |
What pushes a White Plains job toward the higher end? Steep driveways that stress motors, long cable runs from house to gate, and water damage that takes out multiple components at once. Whatever the number is, you’ll see it in writing before we turn a single bolt, and the invoice never grows past that figure unless you approve a change first.
Neighborhoods We Serve in White Plains
We run calls across all of White Plains, from the condo gates near the train station to standalone driveway gates in the residential streets north of Mamaroneck Avenue. If you’re in one of these areas, we’re already close by:
- The Highlands
- Battle Hill
- North Broadway corridor
- Gedney Farms
- Fisher Hill
Typical response time for White Plains calls is same-day in most cases, often within a few hours depending on where the nearest truck is when you call.
Service Area – Cities Near White Plains
We schedule White Plains work daily, and crews also cover the surrounding Westchester area. If you’re in Yonkers, NY, New Rochelle, NY, Mount Vernon, NY, or Bronx, NY, the same written-price guarantee and 365-Day Done Right Promise apply. Dispatch is coordinated from our New York City office, but the technicians working your gate live and stock trucks locally.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in White Plains
Most White Plains calls get same-day service, and many get a technician within a couple of hours. You’ll have a live arrival time you can track, not a four-hour window. Call (903) 417-0793 and a person answers 24/7, even at 2 a.m. when a gate is stuck open and the dog is sizing up the gap.
Some White Plains communities, especially newer developments and HOA-run properties, require approval before visible hardware changes like a new gate or new opener arm. We’ll flag that early and work with whatever the board needs. For straight repairs like a hinge, sensor, or limit switch, approval is rarely required.
All of it. We run jobs from the downtown condo buildings to the single-family streets near Saxon Woods, Gedney Farms, and everywhere in between. If you’re within White Plains city limits, we cover it. Call (903) 417-0793 for a free estimate and a written price.
If your gate is acting up anywhere in White Plains, call Calder Gate Repair at (903) 417-0793. You’ll get a real person, a straight answer, and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What White Plains Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.