Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Yonkers, NY
Gate repair in Yonkers means working on everything from 1920s iron driveway gates in Park Hill to newer aluminum and steel installations up in Crestwood and beyond. Most Yonkers gate repairs run between $180 and $340 before parts, and our technicians carry the common components on the truck, so a single visit takes care of most problems. Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, and one call to (903) 417-0793 gets a real person on the line, not a voicemail.
Why Yonkers Homes Are Different
Yonkers is a city of hills, and those hills shape how gates wear down. The long, sloped driveways common in Runyon Heights and the Lawrence Park area put extra strain on gate hinges and opener motors, because the gate never rests at a neutral position – gravity is always pulling on it. A gate that opens and closes fine on flat ground can tear through bearings in a couple of years on a 15-degree Yonkers slope.
The housing stock adds another layer. Many older Yonkers homes in the Seminary Hill and Ludlow Park neighborhoods were built before standardized gate openers existed, and their gates sit on posts that have shifted over decades of freeze-thaw cycles. That matters because a gate opener doesn’t fail on its own most of the time – the post it’s mounted to moves a quarter inch, the opener binds, and the limit switch (the small sensor that tells the gate when to stop) burns out repeatedly. We see this pattern on older Yonkers properties more than almost anywhere else in Westchester.
Winter is the busiest season. Rock salt and snow melt are rough on the low-voltage wiring and the gearboxes of automatic gates, and rust on slide-gate tracks near the Saw Mill River Parkway corridor is a recurring call. Yonkers homeowners with gates close to the street also deal with constant exposure to snowplow spray, which freezes moving parts overnight.
Our Main Yonkers Services
Yonkers homeowners call us most often for gate repair, electric gate repair, and gate opener repair. Each service has its own dedicated Yonkers page, and here is what each one covers.
Gate Repair in Yonkers
A bent hinge, a sagging gate leaf, a cracked post, or a wheel that skips off the track – this is the mechanical side of gate work. On Yonkers homes with sloped driveways, we often find the gate post has shifted over the years and needs to be reset or reinforced before anything else will work correctly. This is also where you’ll find us fixing rusted hardware on older iron gates in the Ludlow Park neighborhood. For the full breakdown of what we handle, see Gate Repair in Yonkers.
Electric Gate Repair in Yonkers
When the gate opens halfway and stops, trips a breaker, or the keypad stops working, the electric system needs attention. This covers the motor, the control board, the low-voltage wiring, and the safety sensors that stop the gate if something is in the path. Snow and road salt in Yonkers are hard on these systems. We carry replacement boards and motors for most major brands so we almost always complete the repair in one visit. See Electric Gate Repair in Yonkers for specifics.
Gate Opener Repair in Yonkers
The opener is the motorized unit that does the lifting or sliding. Yonkers hills stress openers through the winter, and we regularly replace stripped gears in LiftMaster and Viking units on sloped driveways. The job includes checking the force settings, the safety photo eyes, and the limit switches. If your opener is more than ten years old and the control board has failed, we’ll tell you honestly whether a replacement is the smarter spend. More detail is on our Gate Opener Repair in Yonkers page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Yonkers
Our technicians are factory-familiar with nine major opener brands, including Viking, Ghost Controls, DoorKing, and Elite. We stock common control boards, remote receivers, and safety sensors for these brands on our trucks. Visit our brands page to see the full list and what we keep on hand.
Pricing for Gate Company in Yonkers, NY
| Service | Typical range in Yonkers |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $180 – $340 before parts |
| Gate repair (mechanical) | $180 – $340 before parts |
| Bent hinge replacement | $120 – $250 |
| Gate weld repair | $150 – $400 |
| Control board replacement | $250 – $550 |
| Gate opener replacement | $450 – $1,200 |
| Keypad replacement | $90 – $250 |
| Safety sensor replacement | $110 – $260 |
| Remote programming | $55 – $125 |
| Service call / diagnostic | $55 – $129 |
Steep driveways and rusted hardware can push a Yonkers repair to the top of these ranges, because repositioning a shifted post or replacing a corroded control arm takes more time. Whatever the job, you get a written price before any work starts.
Neighborhoods We Serve in Yonkers
We cover all of Yonkers, from the river wards up to the northern residential streets. Most jobs in the city can be scheduled within one to two days, and emergency calls are dispatched from our New York City office with a live, trackable arrival time.
- Park Hill
- Runyon Heights
- Seminary Hill
- Ludlow Park
- Crestwood
Service Area – Cities Near Yonkers
We also serve homeowners just outside the Yonkers border in Mount Vernon, NY, New Rochelle, NY, White Plains, NY, and Bronx, NY. If your gate sits in one of those communities, the same pricing and the same 365-Day Done Right Promise apply.
Serving Yonkers, NY - Our Local Coverage Area
We’re based in the Yonkers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yonkers
Most non-emergency calls are scheduled within one to two days. For a gate stuck open or a broken opener leaving a driveway blocked, we dispatch emergency crews the same day with a live arrival time you can track from your phone. Call (903) 417-0793 and a live person books it right then.
Some do, especially in gated Yonkers communities with shared entry systems. If your gate is part of an HOA-managed property, check your bylaws before scheduling. For single-family homes, no permit is typically needed for repairing an existing gate – only for new automatic gate installations.
It is a written guarantee on every gate repair Calder Gate Repair completes. If the repair fails within 365 days, we return and make it right at no charge. The promise is stated in writing on every job, and it is never an optional add-on.
If your gate is acting up in Yonkers, call (903) 417-0793 for a free estimate. A live person answers 24/7, and every job comes with a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yonkers Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.