Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Manhattan, NY
Finding a gate company in Manhattan means dealing with tight access, older building infrastructure, and security demands you won’t find in the outer boroughs. Calder Gate Repair handles gate repair, electric gate repair, and gate opener repair across Manhattan every week, and we’ve learned that most jobs here come down to two things: the age of the gate system and the space around it. Every job gets a written price before we touch a bolt, and a live person answers our phones around the clock. Need a gate fixed in Manhattan today? Call (903) 417-0793.
Why Manhattan Homes Are Different
Manhattan gates work harder than suburban ones. They open and close more times per day in apartment buildings, co-ops, and private garages than a typical driveway gate in Westchester will cycle in a week. That constant cycling wears down hinges, limit switches, and opener motors faster. We see it regularly in neighborhoods like the Upper East Side and Harlem, where a building’s gate might serve dozens of residents per hour.
The housing stock also shapes the work. Many Manhattan properties are older, with steel or iron gates installed 20 to 30 years ago and updated with newer openers from brands like Viking or DoorKing. The mechanical gate is often still solid, but the opener or the safety edges have failed. We’re used to working around narrow service alleys, sidewalk vaults, and tight garage entries where there’s barely room to swing a panel. Permits matter too: Manhattan co-op boards and building management often require proof of insurance before we’re allowed on site, and some exterior gate work on landmarked blocks needs review. We carry what’s needed and walk you through it.
Our Main Manhattan Services
Most calls we get from Manhattan homeowners and building managers fall into one of two categories: a gate that won’t open or close at all, or an opener that’s making noise but not moving the gate. Here’s how we approach each one.
Gate Repair in Manhattan
A sagging gate, a hinge that’s pulled out of the brick, a latch that no longer lines up – these are the mechanical failures that stop a gate cold. In Manhattan, salt air and tight clearances accelerate wear. We realign gates, replace hinges and rollers, repair or rebuild weld points, and adjust closing force so the gate seats properly without slamming into its stop. If the gate itself is structurally sound, we fix what failed and quote the repair before starting. See what’s involved: Gate Repair in Manhattan.
Electric Gate Repair in Manhattan
When a gate has power but doesn’t respond, the problem is usually in the control board, a limit switch, a safety edge, or the wiring run. Manhattan buildings often have complex electrical setups – some gates run on junction boxes that have been patched and extended over decades. We test the circuit first, identify the failed component, and replace only what’s needed. No guess-and-swap work. Details are here: Electric Gate Repair in Manhattan.
Gate Opener Repair in Manhattan
Gate openers in Manhattan run constantly, and motors, capacitors, and control boards fail from heat and frequent cycles. We work on nine major opener brands, including Ghost Controls and Elite, and keep common parts in our New York City stock so we don’t wait on a distributor for every repair. If the opener can’t be saved, we quote a replacement with the same brand or a compatible unit. Learn more: Gate Opener Repair in Manhattan.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Manhattan
Calder Gate Repair is factory-familiar with nine major gate opener brands, including Viking, DoorKing, Ghost Controls, and Elite. Our technicians stock the most common control boards, remotes, and safety-edge parts in our New York City office, so many repairs don’t wait on shipping. See the full list on our brands page.
Pricing for Gate Company in Manhattan, NY
| Service | Typical Range in Manhattan |
|---|---|
| Service call & inspection | $45 – $95 |
| Gate opener repair | $180 – $340 |
| Electric gate repair | $220 – $450 |
| Hinge replacement (per hinge) | $75 – $160 |
| Latch or lock replacement | $65 – $135 |
| Limit switch replacement | $120 – $210 |
| Safety edge or photo-eye replacement | $110 – $200 |
| Control board replacement | $240 – $480 |
| Gate wheel or roller replacement | $70 – $150 |
| Complete gate opener unit install | $650 – $1,400 |
Prices in Manhattan run toward the upper end of these ranges when access is tight – a basement garage with no street parking, a gate that requires coordination with a co-op super, or a job on a block where the technician has to carry tools half a city block. We give every customer a written price before any work starts. The number on the invoice is the number we agreed to at the door – never a surprise.
Neighborhoods We Serve in Manhattan
Calder Gate Repair covers the entire borough of Manhattan. Most same-week appointments are available within two to three business days, and emergency gate repairs get priority scheduling when a gate is stuck open or blocking a garage.
- Upper East Side
- Harlem
- SoHo
- Chelsea
- Washington Heights
Service Area – Cities Near Manhattan
While this page covers Manhattan specifically, our crews also serve nearby boroughs and communities that share the same gate issues and security concerns. If you’re outside Manhattan, check our pages for Brooklyn, NY, Staten Island, NY, Bronx, NY, and Mount Vernon, NY.
Serving Manhattan, NY - Our Local Coverage Area
We’re based in the Manhattan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Manhattan
Most Manhattan calls get scheduled within two to three business days for non-emergency repairs. A gate stuck open or blocking a garage gets priority same-day dispatch when possible. Call (903) 417-0793 and a live person will tell you the next real opening, not a vague window.
Often yes. Co-op boards and building management frequently require proof of insurance before outside contractors work on site, and some exterior gates on landmarked blocks need review. We’re used to this and can provide the documentation your board asks for.
If a repair we made fails within 365 days, Calder Gate Repair returns at no charge to fix it. It’s written on every job. If the same part fails and it was installed correctly, the part manufacturer’s warranty applies, and we handle that process for you.
Call (903) 417-0793 for a free estimate on gate repair in Manhattan. A real person answers 24/7, and you’ll get a written price before anything starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Manhattan Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.