Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Argyle
When a gate stops working in Argyle, it’s more than a nuisance. It’s a security gap and a daily frustration. Calder Gate Repair fixes automatic and manual gates across Argyle, from sliding driveway gates along Country Club Road to solar-powered swing gates on rural acreage near Harpole Road. Most repairs we complete the same day, and every job starts with a written price before any work begins. Call us at (903) 417-0793 and a live person answers, 24/7.
Why Calder Gate Repair Is Argyle’s Preferred Gate Repair Company
Argyle homeowners call us because we know the difference between a gate that needs a new operator and one that needs a post reset. North Texas clay soil heaves with wet-dry cycles, and Argyle’s newer subdivisions sit on that same shifting ground. We diagnose before we replace anything. That saves Argyle customers real money, because the fix is often a sensor or a low-voltage line rather than the gate operator itself.
We’re part of the Relay Home Co. family, founded in 2009. Each location is independently owned and operated under The Relay Visibility Guarantee. That means every Argyle customer gets a live, trackable arrival time, a written quote before work starts, and a digital invoice after. No vague four-hour windows. No surprises at the door.
Our crew is background-checked and uniformed. We service nine major gate opener brands including Linear, Viking, Ghost Controls, and DoorKing. And every repair carries the 365-Day Done Right Promise in writing: if the repair fails within 365 days, we return at no charge. That’s a free second visit, not a pro-rated discount.
Sliding Gate Repair in Argyle
Sliding Gate Repair in Argyle most often involves a gate that stalls mid-travel or jumps the rack and pinion. Long driveway runs along US 377 and in Argyle’s acreage communities mean longer tracks, more debris, and more strain on the operator. Wind, gravel, and the fine dust of North Texas summers all interfere with travel. We start by clearing the track, checking the limit switches (the small sensors that tell the gate when to stop), and then testing the motor under load. Most sliding gate repairs in Argyle run $185 – $390 before parts, depending on whether we’re replacing a limit switch, a gear, or a control board.
Track and Rack Alignment
A slide gate that grinds or jumps usually has a track out of level or a rack with worn teeth. We level the track, re-set the rack, and replace damaged gear teeth when needed. Leaving it alone turns a small adjustment into a full operator replacement.
Operator Diagnostics
When the track is clean and aligned, we test the operator itself. On Viking and Ghost Controls slide operators, we often find burned relays or corroded capacitor terminals. We repair the board or swap the component rather than selling you a whole new unit.
Wrought Iron Gate Repair in Argyle
Wrought Iron Gate Repair in Argyle almost always comes back to one thing: the hinge post. Gates on Argyle’s older rural properties and newer builds on expansive clay both shift when the ground moves. A post that leans even an inch makes the gate sag, the latch miss, and the operator strain. We reset posts below the frost line, re-weld hinges when needed, and realign the gate so it swings freely. Typical wrought iron gate repairs in Argyle run $140 – $320, with weld and rust repair adding $80 – $180 depending on the severity.
Hinge and Post Reset
We cut away the old footing, set the post plumb, and use high-strength concrete mixed for North Texas soil conditions. Then we re-hang the gate, so it closes flush with the latch. This is the fix that lasts, not a shim under the panel.
Weld and Rust Treatment
Argyle’s humidity swings cause surface rust on wrought iron, especially near the bottom rail where sprinklers hit. We grind off corrosion, weld any cracked joints, and apply a rust-inhibiting primer that matches the existing finish.
Trusted Brands We Service in Argyle
We’re factory-familiar with Linear, Viking, Ghost Controls, DoorKing, and five other major opener brands. For Argyle customers that matters because we carry local stock of the most common boards, remotes, and limit switches for these systems. A DoorKing slide operator repair doesn’t wait three days on a part. We keep what Argyle homes actually use on the shelf, and when a part is unusual, our Dallas-Fort Worth office coordinates rush delivery. We repair and install, and we don’t push a brand you don’t need.
Common Gate Repair Problems We See in Argyle Homes
- Sagging swing gates from shifting clay. Argyle’s expansive clay soil expands after rain and contracts in drought. Post footings that weren’t deep enough move with it, and the gate sags until it drags.
- Slide gates jumping the rack. Gravel, dry grass clippings, and misaligned track sections at driveway entrances along FM 407 and Harpole Road are regular culprits in Argyle’s acreage areas.
- Photocells knocked out of alignment. Heat, insects building nests inside the housing, and moisture from sprinkler overspray leave safety sensors shorted or misaligned. The gate then refuses to close, which is the correct and safe behavior under UL 325.
- Solar opener batteries failing on rural properties. Many Argyle homes with detached pasture gates run solar-charged Viking or Ghost Controls systems. The failure point is almost always the battery, not the operator. We test the panel, the charge controller, and the battery independently before replacing anything.
Key takeaways: The most common Argyle gate failures are post movement, debris on tracks, and low-voltage or battery issues, not the operator motor itself. We diagnose the entire gate, not just the part that looks broken.
Pricing for Gate Repair in Argyle, TX
Here are honest numbers for Argyle. A service call and diagnostic runs $79, which is credited toward the repair if you approve the work. Most sliding gate repairs here run $185 – $390 before parts. Wrought iron hinge resets and re-alignments run $140 – $320. Replacing a gate opener board typically runs $220 – $480 depending on brand. A full operator replacement on a single swing gate in Argyle runs $850 – $1,900, installed, including the safety edges and UL 325 reversal testing. We give you the exact price in writing before any work starts. The number on the invoice is the number you agreed to. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Argyle
Our crews work throughout the US 377 corridor and the surrounding areas. If you’re in Flower Mound, Roanoke, Lake Dallas, or Denton, our Gate Repair team covers those areas too. Learn more about our local coverage at Gate Repair in Argyle.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Argyle
Usually not. When a gate opens but refuses to close, the operator is responding to a safety input that’s telling it an obstruction is present. The cause in Argyle is typically a misaligned photocell, a shorted edge sensor, or a battery-damaged safety board. We test each input before touching the operator. Call (903) 417-0793 and we’ll diagnose it honestly, with a written price first.
That’s Argyle soil, not a bad gate. Expansive clay shrinks in drought and swells after rain, and a hinge post on a shallow footing moves with it. We reset the post below the frost line, re-hang the gate, and re-align the latch. The alternative, adding a caster or just adjusting the panel, only works for a few months.
Yes. We service solar-charged Viking, Ghost Controls, and Linear systems on acreage properties throughout Argyle, from the Canyon Falls area out toward Harpole Road. Most solar gate failures are battery or panel issues, not the operator, so we test each component separately. We quote the repair before any parts are ordered.
We repair and install both. Wrought iron repairs include hinge resets, post replacement, weld repair, and rust treatment. Sliding gate repairs include track leveling, rack replacement, and full operator diagnostics. We stock parts for Argyle customers and complete most repairs the same day.
Most repairs are completed in one to three hours on site, depending on the failure. A photocell replacement is under an hour. A hinge post reset with concrete work can take half a day. A full operator replacement with safety edge installation is typically four to six hours. We tell you the expected time when we give the written quote. Call (903) 417-0793 and we’ll schedule around your day, not the other way around.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Argyle and the surrounding communities.