Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Argyle, TX
Gate repair in Argyle, TX usually costs between $95 and $425 for most common fixes, with opener motor replacement landing in the $400 – $650 range. We’re Calder Gate Repair, and we handle the full picture: gates that won’t slide, openers that quit mid-cycle, hinges that sag, and keypads that stopped talking to the board. Most Argyle calls get a same-day or next-day visit, and every job starts with a written price before we touch a single bolt. Call (903) 417-0793 and you’ll get a live person, not a voicemail.
Why Argyle Homes Are Different
Argyle sits on a mix of open grassland and newer master-planned subdivisions, which means two very different gate situations show up on our work orders. The older acreage properties near Harvest and the Country Lakes area tend to have long driveway runs with heavy steel farm-style gates, often on original posts that have shifted over years of North Texas clay movement. The newer communities east of I-35W have decorative iron and aluminum gates that look clean but were frequently installed with builder-grade opener arms that wear out faster than they should.
Argyle’s clay-heavy soil is the quiet villain here. It swells after spring rain and shrinks through every dry summer, and that cycle slowly pulls gate posts out of plumb. A gate that dragged on one corner in March may not close at all by August. We level posts, re-hang leaves, and adjust the opener travel so the gate isn’t fighting the ground every cycle. HOA requirements matter too: several Argyle communities expect driveway gates to match a specific finish or stay within a height range, and we’d rather you know that before ordering a replacement panel than after. None of this is exotic to us. It’s just what Argyle does to gates.
Our Main Argyle Services
Most Argyle homeowners call us for one of three things: a gate that won’t open or close properly, an electric system that has power issues, or an opener that’s dead or behaving erratically. Each service has its own Argyle page with full pricing and what the repair involves.
Gate Repair in Argyle
This covers the physical gate itself: sagging hinges, bent tracks, cracked welds, wheels off the rail, posts out of line. On Argyle acreage lots, we’re often dealing with heavy cantilever gates that have been scraping for months before anyone notices the posts leaning. Our crew cuts out the damaged section or re-hangs the whole leaf, then tests the full travel arc until it glides. If the repair fails within 365 days, we come back at no charge under the 365-Day Done Right Promise. Gate Repair in Argyle
Electric Gate Repair in Argyle
When the problem is power, wiring, or components like photo eyes and loop detectors, that’s electric gate repair. Argyle storms knock out everything from breaker trips to fried control boards, and we trace the system end to end: transformer, conduit, junction boxes, safety edges. The goal is the same as every Calder job: find the actual fault, write the price, fix it once. Electric Gate Repair in Argyle
Gate Opener Repair in Argyle
If the gate moves by hand but not by button, the opener is your problem child. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units across Argyle, and most opener repairs take one visit: new arm, new limit switch, new receiver, or a reprogrammed remote system. We carry common parts on the truck and quote any special-order parts before we order them, never after. Gate Opener Repair in Argyle
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Argyle
We stock common parts for Linear, Viking, Ghost Controls, and DoorKing openers on our trucks, which cuts most Argyle repairs down to a single visit. If a board or motor has to come from the manufacturer, we tell you the timeline and the price before ordering. See our brands for the full list of what we service.
Pricing for Gate Company in Argyle, TX
| Service | Typical range in Argyle |
|---|---|
| Gate won’t open or close | $95 – $325 |
| Gate opener motor replacement | $400 – $650 |
| Gate off track | $125 – $375 |
| Keypad or remote programming | $85 – $150 |
| Photo eye sensor replacement | $110 – $195 |
| Control board replacement | $275 – $475 |
| Hinge or wheel replacement | $140 – $325 |
| Opener arm replacement | $185 – $360 |
| Full diagnostic visit | $65 – $120 |
| Gate post leveling or reset | $225 – $450 |
Aggressive clay movement and long runs with heavy gates push Argyle pricing toward the upper end of those ranges. Whatever the number, you’ll see it in writing before we start, and the final invoice matches that written price.
Neighborhoods We Serve in Argyle
We work across the whole town, from the established acreage communities on the north side to the newer subdivisions south and east of FM 407. Typical response time in Argyle is same-day or next morning, depending on call volume.
- Harvest
- Country Lakes
- The Ridge at Northlake
- Copper Canyon side of Argyle
- Bartonville-adjacent acreage
Service Area – Cities Near Argyle
Calder Gate Repair is part of the Relay Home Co. family, and our Dallas-Fort Worth dispatch routes Argyle crews daily. We also cover Flower Mound, TX, Roanoke, TX, Lake Dallas, TX, and Denton, TX from the same team. Same written-price promise, same 365-Day Done Right Promise, no matter the ZIP code.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Argyle
Most Argyle calls are answered live and scheduled for same-day or next-morning arrival. Emergency calls, like a gate stuck open overnight, get priority routing. Call (903) 417-0793 and tell us what’s happening, and we’ll give you a real arrival window you can track.
Repairs that match the existing gate and finish usually don’t require HOA approval. If you’re replacing panels or changing the gate’s appearance, check your community’s guidelines first; we can match most Argyle HOA finish specs so you stay compliant. Our written quote works either way.
Yes. We serve the entire Argyle area, from acreage north of town through Harvest, Country Lakes, and the neighborhoods along FM 407. If you’re not sure whether your address counts, call (903) 417-0793 and we’ll confirm it in about thirty seconds.
For a free estimate on gate repair, electric gate repair, or gate opener repair in Argyle, call Calder Gate Repair at (903) 417-0793. A live person answers, and your written price is set before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Argyle Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.