Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arlington
Gate repair in Arlington usually takes 1 – 3 hours once our technician arrives, and most jobs are completed same day. If your gate drags on the ground, won’t open, or makes a grinding sound when the motor runs, call (903) 417-0793 and a live person picks up. Calder Gate Repair is the dedicated Gate Repair team inside the Relay Home Co. family, and our crews know Arlington’s neighborhoods, streets, and the specific problems this city’s soil throws at gate hardware.
Why Calder Gate Repair Is Arlington’s Preferred Gate Repair Company
Arlington homeowners call us because the job gets done with a written price before anything starts, a live arrival time they can track, and a real guarantee in writing. Every technician is background-checked and wears a uniform. Every call gets answered by a person, 24/7, not a phone tree. Nico Alvarez leads our Gate Repair in Arlington work, and he holds every job to one standard: if it’s not done right, we return and make it right, free, within 365 days. That’s the 365-Day Done Right Promise, and it’s written on every work order we hand a customer in Arlington.
Our Arlington customers typically find us after a gate stops opening, or worse, after a gate closes on a car. The Dispatch and scheduling is coordinated from the brand’s Dallas-Fort Worth office, but the crews work Arlington daily. They know the difference between a gate in Southeast Arlington with sandy loam over clay and one in North Arlington where the footing sits in deeper clay. That local knowledge changes how we set posts and how long the repair actually lasts.
Metal Gate Repair in Arlington
Metal gate repair in Arlington almost always comes down to two things: the hinge post footing and the panel’s own weight pulling against the hardware. Arlington expands and contracts on a bed of clay soil. The clay drinks water during spring rains and shrinks hard in August. Posts set in shallow concrete move, and then a perfectly straight steel or aluminum panel starts dragging at the latch side. Metal gate repair here typically runs $220 – $480 for hinge replacement, realignment, and sag correction before any new panels or steel work. Weld and rust repair on Arlington’s older ornamental gates usually adds $150 – $350 depending on how much of the frame needs cutting and re-welding.
Hinge Replacement and Post Reset
When the hinge post heaves, tightening the hinges does nothing. We pull the post, dig a deeper hole, set it in concrete with a wider base, and only then re-hang the panel. That’s the difference between a repair that lasts one season and one that holds through several.
Weld Repair on Steel Panels
Arlington’s humidity works on bare steel fast. Surface rust turns into holes at the bottom rail, especially where the gate meets the ground or where a sprinkler sprays it every morning. We cut out the rot, sleeve or patch the frame, and re-paint the repaired section to match.
Wood Gate Repair in Arlington
Wood gate repair in Arlington usually starts with a gate that sags toward the latch post or a panel that scrapes on concrete after a rain. Same clay problem, different symptom: the wood absorbs moisture, swells, and throws the frame out of square. Wood gate repair here generally runs $180 – $380 for hinge replacement, frame squaring, and re-hanging. If the post itself is rotten, plan on $95 – $210 for a new post set in concrete. Soft wood around the hinges is common in Arlington’s older neighborhoods where gates have been through twenty summers of heat and an occasional ice storm.
Sag Correction Without Replacing the Gate
We use a sag kit with turnbuckles and anti-sag brackets on most wood gates. That pulls the panel back square without ripping out the whole frame. If the frame is still sound, this is often the most cost-effective fix in Arlington.
Post Replacement in Soft Ground
Wooden posts rot at ground level because that’s where the water sits. In Arlington’s clay, water doesn’t drain fast, so the bottom of the post stays wet. We set the new post deeper, pack gravel at the base for drainage, and use concrete around the upper section.
Trusted Brands We Service in Arlington
Our technicians are factory-familiar with nine major gate opener brands, and in Arlington we see a lot of LiftMaster, Ghost Controls, and Viking units on residential driveways. DoorKing and Elite show up on the larger commercial lots and gated community entrances around the city. Because we carry common boards, arms, and limit switches for these brands on our Arlington trucks, we usually fix the problem in one visit rather than ordering a part and coming back next week. That matters when your gate is your only way into the backyard.
Common Gate Repair Problems We See in Arlington Homes
- Clay-soil post movement: The hinge post lifts or sinks with moisture swings, dropping the latch side and tripping the operator’s current-sensing reversal. In Arlington this is the single most common reason a gate stops working even though nothing looks broken.
- Sag correction done on the panel only: A previous repair replaced hinges but left the footing moving. The gate drops again within a season. We fix the footing first, then the panel.
- Safety edge or photocell knocked out of alignment: A mower, trash can, or delivery truck clips the gate, and suddenly the operator runs but no longer passes UL 325 entrapment protection. The gate still opens and closes, but it’s no longer safe.
- Operator gear or limit switch failure after Arlington’s heat: Plastic gears and boards age faster in Texas heat. We replace worn gears and re-set limit switches before the motor burns itself out.
Pricing for Gate Repair in Arlington, TX
Most gate opener repairs in Arlington run $180 – $340 before parts, depending on the brand and whether we’re replacing a board, a gear, or an arm. Hinge and post work falls between $220 – $480 for metal gates and $180 – $380 for wood. Weld repair adds $150 – $350 when the frame needs cutting. Full gate opener replacement, including a new LiftMaster or Ghost Controls unit and safety edge, starts around $750 and goes up with panel weight and driveway width. Every quote is written before any work starts. The number on your invoice is the number we agreed to at your door. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Arlington
If you’re in Mansfield, Kennedale, Burleson, or Cedar Hill, our Arlington crews route through those areas regularly. The same written pricing, live tracking, and 365-Day Done Right Promise apply everywhere we work. Call (903) 417-0793 and we’ll tell you exactly when a technician can be at your gate.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arlington
The footing under your hinge post has moved. Arlington’s expansive clay soils shrink and swell between droughts and wet spells, and that heaves posts out of position even when the gate itself looks fine. The fix is lifting the gate, resetting the post deeper in fresh concrete, and re-hanging the panel. Expect to pay $220 – $480 for metal gates. Call (903) 417-0793 and we can confirm the diagnosis on site.
No, and you should be wary of anyone who promises that. Gate installation work is measured, ordered, and scheduled. New driveway gates need post footings dug and cured, power run to the operator, and safety loops cut into the pavement. A proper installation in Arlington takes a few days to a week depending on ground conditions and materials. We’ll give you a free measure and a written price before anything starts. Call (903) 417-0793 to schedule the site visit.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Arlington specifically, we see a lot of LiftMaster, Viking, and Ghost Controls on residential gates. If your operator is one of those, we likely have the part on the truck when we arrive. Call (903) 417-0793 and tell us what unit you have; we’ll bring what we think you’ll need.
Yes. A gate that closes on a car is failing its UL 325 entrapment protection test, which means the safety edge or photocell is misaligned, disconnected, or dead. Left unrepaired, that gate is dangerous to kids, pets, and your own bumper. We re-align or replace the safety edge, re-test the current sensing on the operator, and confirm the gate reverses properly under load before we leave. Call (903) 417-0793 and we’ll schedule a safety inspection.
Yes. Adding a keypad, a telephone entry system, or an inductive loop detector to an existing Arlington gate is straightforward on most systems. Keypads run $250 – $450 installed. Loop detectors run $400 – $700 depending on whether we’re cutting into existing concrete or laying the loop before a new pour. We’ll quote the exact price in writing before any drilling starts. Call (903) 417-0793 to schedule a free estimate.
Written by Nico Alvarez, owner and lead technician at Calder Gate Repair, serving Arlington with honest gate repair backed by a written guarantee.