Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Brushy Creek
When a gate refuses to open at 7 a.m. on a school morning, you don’t want a callback window. Most gate repair calls in Brushy Creek, TX are answered and scheduled the same day, with a live person on the line at (903) 417-0793. Our technicians know the neighborhoods, the post-and-clay issues, and the opener brands installed across this part of Williamson and Travis County. We show up in a marked vehicle, give you a written price before any work starts, and stand behind the repair for a full year.
Why Calder Gate Repair Is Brushy Creek’s Preferred Gate Repair Company
Homeowners in Brushy Creek call us because we treat gate repair the way they’d want it handled at their own house: straight answers, a real arrival time, and no invoice surprises. Nico Alvarez runs our gate repair division with one rule: diagnose first, quote second, and never start tightening bolts until you’ve read the number on the page. That’s why callers from Sendero Springs, Cat Hollow, and the villages along Sam Bass Road keep coming back.
We’re the dedicated Gate Repair team inside the Relay Home Co. family, founded in 2009. Each location is independently owned and operated under The Relay Visibility Guarantee, which means when we dispatch to Brushy Creek, you get a live, trackable arrival time, not a four-hour service window. Our technicians are background-checked and uniformed. Our dispatchers answer calls around the clock. And every repair carries the 365-Day Done Right Promise in writing: if the fix fails within 365 days, we return free of charge.
That guarantee is the reason people from Avery Ranch to Oakbrook trust us with driveway gates that have already eaten two hinge replacements and still drag.
Wood Gate Repair in Brushy Creek
Wood Gate Repair in Brushy Creek usually comes down to one of two things: the panel has dropped out of square, or the post holding it has moved. Around here, those two problems are almost always connected. Most Brushy Creek neighborhoods were built in the 1990s, and many original driveway and side-yard gates hang on 4×4 or 6×6 cedar posts set directly into expansive clay soil. Central Texas rain causes that clay to swell and shift. The post leans. The gate drops. The latch no longer lines up. And replacing hinges won’t fix any of it.
We see this constantly in the older lots along Hairy Man Road and around the greenbelts off Great Oaks Drive. A proper fix means pulling the gate, re-setting or sleeving the post, correcting the panel’s hang, and only then addressing hardware. Typical wood gate repairs in Brushy Creek run $180 to $460 depending on post work, panel condition, and hardware replacement. A full re-set with a new post footing usually lands between $400 and $700.
Post Re-Set and Hinge Correction
When a post leans, every attached hinge loads unevenly and every latch becomes a fight. We re-set the post in a deeper footing, pack it, brace it while it cures, and re-hang the panel level. For cedar gates that have warped, we’ll plane, shim, or replace pickets as needed so the gate closes without scraping.
Rotted Post Bottom Repair
Brushy Creek’s clay holds water against buried wood, which is why the bottom six inches of a gate post are typically the first part to fail. If the post is sound above ground but rotten at grade, we can sleeve it in steel or install a galvanized anchor base rather than tearing out surrounding landscape and concrete to replace the entire post.
Driveway Gate Repair in Brushy Creek
Driveway Gate Repair in Brushy Creek often involves more than the gate itself. Automatic driveway gates run on operators wired to the house, safety sensors, and sometimes loop detectors cut into the slab. When soil movement shifts a driveway slab even a quarter inch, photocells misalign, loops read false vehicle presence, and the gate either refuses to close or reverses mid-travel. That’s a uniquely local pattern tied to our clay soil and long driveway runs on larger lots.
We were called to a home off Meadowside Drive in Brushy Creek where a cedar driveway swing gate had dragged for months. The owner had already paid another company to replace two hinges, with no improvement. Our tech found the hinge post leaning about 3 inches out of plumb from soil movement. We pulled the gate, re-set the post footing, corrected the sag, and re-hung the panel. Then we replaced the LiftMaster gate operator’s safety photocell and re-ran the reversal test before calling it done. The gate has operated cleanly since.
Operator Replacement and Wiring
Most driveway gate operator repairs in Brushy Creek fall between $260 and $520 for labor, with parts added separately if the control board, battery, or motor needs replacement. We service FAAC, BFT, and Linear units alongside LiftMaster. If the operator is beyond reasonable repair, we’ll show you replacement options with a written quote before ordering anything.
Safety Photocell and Loop Detector Alignment
Texas summers cook electronic boards, and long driveways cause voltage drop that shortens operator life. When a gate stops closing or reverses constantly, we check photocells first, then power. It’s a 30-to-90-minute diagnosis in most cases and typically costs $120 to $220, which includes alignment and re-testing.
Trusted Brands We Service in Brushy Creek
Our techs are factory-familiar with the brands Brushy Creek homes actually use, including FAAC, BFT, Linear, Viking, LiftMaster, Mighty Mule, Ghost Controls, DoorKing, and Elite. When a control board fails on a Viking slide gate operator or a FAAC swing unit loses its limit settings, we bring the right part and the calibration gear on the first trip. For common Brushy Creek repairs, we keep Linear and LiftMaster parts stocked locally, so we’re not ordering from a distributor and stretching your repair across three days. That matters when your gate is your primary entry point.
Common Gate Repair Problems We See in Brushy Creek Homes
- Post lean from clay soil movement. Expansive Clay under Brushy Creek swells after rain and shrinks in drought, slowly tilting shallow-set posts. The gate sags, even though the panel and hinges are fine.
- Operator strain on long driveway runs. Sprawling lots in areas like Cat Hollow and Sendero Springs often mean 80 to 120 feet of power run from the house to the gate. Voltage drop stresses Viking and Linear operators and shortens their life.
- Photocell and loop detector misalignment. When a driveway slab shifts even slightly, the safety beam and in-ground loops fall out of alignment. The gate refuses to close, or reverses halfway, or stays open indefinitely.
- Hinge post rot at grade. Buried cedar in damp clay rots from the outside in. Homeowners replace surface hinges when the real problem is six inches below the dirt.
Pricing for Gate Repair in Brushy Creek, TX
Most gate repairs in Brushy Creek fall into clear ranges. Diagnostic calls run $79 to $129, and that fee is credited toward the repair if you proceed. Hinge, latch, and alignment work typically runs $180 to $340. Post re-sets and footing repairs run $400 to $700. Operator board or battery replacements run $260 to $520 before parts, and full operator swaps usually land between $800 and $1,700 installed, depending on the model and power run. We write your price down before anything starts, and the invoice matches that number exactly. Call (903) 417-0793 for a free estimate over the phone.
| Repair Type | Typical Cost |
|---|---|
| Diagnostic / service call | $79 – $129 (credited to repair) |
| Hinge, latch, or gate re-alignment | $180 – $340 |
| Post re-set / footing repair | $400 – $700 |
| Operator board / battery replacement | $260 – $520 + parts |
| Full operator replacement | $800 – $1,700 installed |
We Also Serve Cities Near Brushy Creek
Beyond our work across Brushy Creek, we take gate repair calls from Houston, San Antonio, Dallas, and Fort Worth. If you live in one of those metros or anywhere nearby, we coordinate dispatch from our Austin office and send the same background-checked techs with the same written-price-before-work guarantee.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Brushy Creek
Because the hinge post is moving, not the hinges. Brushy Creek sits on expansive clay soil that swells after Central Texas rain and shrinks in drought, which slowly pushes shallow-set 4×4 or 6×6 posts out of plumb. Replacing hinges on a leaning post does nothing. The fix is a post re-set or sleeve, followed by re-hanging the panel. That typically runs $400 to $700 in Brushy Creek.
A full driveway gate installation typically takes one to three days on site, plus a few days for concrete to cure before we mount the gate and operator. That includes digging proper post footings, running the power conduit, installing the operator and safety edges, and calibrating the open/close limits. We never promise same-day installation because a correct job requires cure time. We do provide a written schedule and price before work begins. Call (903) 417-0793 to schedule a site measure.
Yes. Every automatic gate operator in the U.S. is required to have safety devices, including photocells and safety edges, that reverse the gate when something blocks it. We test and calibrate those on every repair. If soil movement in your Brushy Creek yard has misaligned your photocells, we’ll realign them and re-run the reversal test, typically in under an hour.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Brushy Creek specifically, we stock common Linear and LiftMaster parts locally, which means faster turnarounds when a control board or battery goes down mid-summer.
Look at the photocell alignment and the track. Brushy Creek’s clay can shift a slide gate’s concrete track or post just enough to break the safety beam, which tells the operator to stop. Don’t attempt to work on a high-tension slide gate mechanism yourself, the gate itself is heavy and the motor can pin a hand. Call us at (903) 417-0793 and we’ll diagnose it in one visit, quoted upfront.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family.