Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Carrollton
A gate that won’t open, drags on the concrete, or swings loose after dark is more than an annoyance in Carrollton, TX. It’s a security gap on your property. Most gate repairs here run between $180 and $340 in labor before any parts, and we can usually get a technician to your Carrollton home the same day you call. Calder Gate Repair serves every corner of Carrollton, from the neighborhoods off Josey Lane to homes near Hebron Parkway and Frankford Road. If your gate is acting up, call (903) 417-0793 and a live person will answer, day or night.
Why Calder Gate Repair Is Carrollton’s Preferred Gate Repair Company
We’re the dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009. Homeowners around Carrollton keep our number saved because we show up on time, give you a written price before touching a bolt, and stand behind every repair with the 365-Day Done Right Promise. That promise is specific: if the repair fails within 365 days, we come back at no charge. No fine print, no arguing.
Our technicians are background-checked and uniformed, and you’ll get a live, trackable arrival time. Not a four-hour window. Nico Alvarez leads our team, and he’s built the company around one principle that Carrollton residents appreciate: explain the problem in plain words, quote the fix in writing, and do the job right the first time. Homeowners near Downtown Carrollton, in the Castle Hills area, and over by Indian Creek have all seen the same thing, a straightforward repair with a digital invoice and a real guarantee behind it.
Driveway Gate Repair in Carrollton
Driveway Gate Repair in Carrollton usually comes down to one of three things: a hinge post that has moved, an operator that has lost its alignment, or a panel that’s sagging from years of clay soil movement. We don’t just tighten bolts and hope. We check the footing, the hinges, the operator arm, and the safety sensors, then tell you exactly what needs to be fixed and what it will cost before we start. Most driveway gate repairs in Carrollton run $180 to $340 in labor, with any parts quoted separately in writing.
Hinge and Post Repair
Carrollton sits on the Blackland Prairie, and that’s the single biggest factor in our gate work. The soil here shrinks in dry summers and swells after rain, which means the concrete footings under hinge posts shift. When a post moves, the gate panel drags or won’t latch. We fix the footing first, then the panel. Tightening hinges on a shifted post just postpones the problem until the next wet season.
Gate Realignment
A gate that scrapes the concrete near Josey Ranch Lake or along Rosemeade Parkway is almost always a realignment issue. We level the posts, reset the hinge line, and test the gate through a full open and close cycle. We also check the operator limit switch, the small sensor that tells the gate when to stop, so the motor isn’t fighting a losing battle every time it cycles.
Gate Welding in Carrollton
Gate Welding in Carrollton is the fix when a bolt and bracket won’t hold, either the hinge is torn from the post, the frame is cracked, or a decorative element has broken free. We weld on-site in most cases, which means your gate doesn’t have to leave the property. Rates run $150 to $500 depending on the extent of the weld and whether we need to reinforce the surrounding frame. You’ll get a written price before any torch is lit.
Weld and Rust Repair
Rust is the quiet killer of iron gates in North Texas. Humidity, rain, and the occasional ice event work into hairline cracks and stress points. We grind out the rust, assess whether the steel has lost too much material to be safe, and either reinforce or replace the section. If the gate can’t be safely repaired, we’ll tell you straight and show you why.
Frame Reinforcement
When the bottom rail of a gate has rusted through or the corner joints have started to separate, a few tack welds won’t fix it. We cut out the compromised section, weld in fresh steel, and clean the area back to a paintable surface. It’s the difference between a repair that lasts 90 days and one that lasts years.
Trusted Brands We Service in Carrollton
Our techs are factory-familiar with the opener brands you’re most likely to have on a Carrollton property: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Carrollton customers, that means we can skip the “figure it out on your driveway” phase and go right to the fix. We keep common FAAC and Linear components stocked locally, and for BFT systems we can typically source parts within a day or two. If you’ve got a swing gate on a residential street near McInnish Park or a slide gate on a larger lot off Marsh Lane, chances are we’ve already serviced your exact opener model this month.
Common Gate Repair Problems We See in Carrollton Homes
- Gate panel sagging from post footing heave. The shrink-swell clay under Carrollton moves with every wet-dry cycle. When the hinge post rises, the gate drags. Bolting the panel tighter just hides the symptom. The real fix is a re-poured, deeper footing and a re-leveled post.
- Gate operator stalling after a dry summer. A dry spell pulls moisture from the soil, and the concrete pad under your operator can shift just enough to throw the chain or rack and pinion out of line. The motor strains, the gate stalls, and the limit switch starts misreading the travel. We reset the pad or re-align the drive, not just clear the fault code.
- Safety sensors failing from moisture or rodent damage. The operator housing is a warm, dry place for mice and rats, especially in the colder months around Carrollton. They chew the wiring, and the gate either refuses to close or runs without proper entrapment protection. Under UL 325, entrapment protection is not optional. We repair or replace the photocells and edge sensors and re-test the reversing function.
- Hinge pins seized or cracked from rust. Iron gates in Carrollton bake in the Texas sun and soak in the spring rains. Over years, hinge pins seize, bearings wear flat, and the panel starts to hang. If the gate fights you when you push it manually, call before the operator burns out trying to move it.
Pricing for Gate Repair in Carrollton, TX
Most Gate Repair in Carrollton jobs land between $180 and $340 in labor, and we give you the exact number in writing before anything starts. A hinge and post repair typically falls in the $180 to $280 range. Gate welding runs $150 to $500 depending on how much steel needs reinforcing. Operator repairs, like a failed capacitor or a bad control board, usually run $220 to $380 including the part. The price you agree to at the door is the price on the invoice, always. Call (903) 417-0793 for a free estimate, and we’ll talk through your gate’s symptoms before we ever roll a truck.
We Also Serve Cities Near Carrollton
Beyond Carrollton, our Gate Repair team covers homes throughout the northwest metro: Addison, Coppell, Richardson, and Lewisville. If you’re just outside our Carrollton service area, call anyway. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, and we’ll tell you straight if we can get a crew to you quickly.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
Because the hinge post is moving, not the hinges. Carrollton’s Blackland Prairie clay expands when wet and contracts when dry, which heaves shallow post footings up and down through the seasons. Every time the post moves a fraction of an inch, the gate panel sags a little more. Tightening the hinge bolts just re-binds the panel to a post that’s already out of place. The only lasting fix is to expose the footing, re-pour it deeper, and re-level the post before adjusting the panel. Call (903) 417-0793 and we’ll check the footing, not just the bolts.
Yes. Automatic gate operators in Carrollton must meet UL 325 entrapment protection standards, which means working photocells or edge sensors that stop and reverse the gate when something or someone is in the path. This is a federal safety standard that applies to every residential and commercial operator in the city. A gate that runs without functioning entrapment protection is both a legal liability and a real danger, especially to kids and pets. If your sensors are damaged or your gate no longer reverses on contact, call (903) 417-0793 and we’ll test the system and quote the repair in writing.
In most cases, yes. We keep common operator parts stocked for the brands Carrollton homeowners actually run, including Linear, FAAC, and Viking, and our team coordinates dispatch from our Dallas-Fort Worth office so a tech can usually reach your Carrollton property the same day you call. Slide gate operator repairs typically run $220 to $380 in parts and labor, depending on the failure. We’ll give you a written price at the door before we open the operator cover. Call (903) 417-0793 and a live person will book you in right now.
In Carrollton, the most likely cause is either a shifted operator pad or a failed drive component, not the motor itself. When the soil dries out under a concrete operator pad, the unit can move just enough to throw the chain or rack off its line. The motor runs but can’t drive the gate. Alternatively, the capacitor or drive gear inside the operator may have failed. We diagnose both in one visit and quote the fix in writing. If the problem is a shifted pad, we re-grade and re-set it; if it’s the drive, we replace the part. Call (903) 417-0793 for an exact quote, estimates are free.
Gate welding in Carrollton typically costs $150 to $500 depending on the amount of steel involved. You need welding when a hinge has torn free from the post, a frame rail has cracked through, or rust has eaten a section of the bottom rail. Bolting a patch over a cracked frame is a temporary fix that will fail under load. We weld on-site at your Carrollton property, give you a written price before starting, and stand behind the work with the 365-Day Done Right Promise. Call (903) 417-0793 and we’ll tell you whether your gate is a weld candidate or a replacement.
Key Takeaways:
- Most gate repairs in Carrollton run $180 to $340 in labor, with welding at $150 to $500.
- Blackland Prairie clay soil moves gate post footings, so Carrollton repairs often require re-pouring the footing, not just adjusting the panel.
- Every repair includes a written price before work starts and a 365-day written guarantee.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers.
- A live person answers our phone 24/7. No voicemail, no bot.
Call Calder Gate Repair in Carrollton Today
If your gate is dragging, stalling, or just acting wrong, don’t wait until it stops completely. Call Calder Gate Repair at (903) 417-0793 for a free estimate. We’ll talk through what’s happening, give you an honest idea of the cost, and send a uniformed, background-checked tech with a live arrival time you can track. The price you agree to is the price you’ll pay, and if our repair doesn’t hold for a full year, we come back free. That’s the 365-Day Done Right Promise, and it applies to every job we do in Carrollton. To learn more about our full Gate Repair in Carrollton coverage or to schedule a visit, call now. A real person answers, day or night.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Carrollton with honest pricing and guaranteed gate repairs.