Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Frisco
If your gate in Frisco is grinding, sagging, or simply not opening, the fix usually comes down to two things: finding the actual cause instead of treating the symptom, and getting a straight answer on price before the work starts. Calder Gate Repair handles electric gate repair, automatic gate repair, hinge and post repair, and realignment work across Frisco, and we answer the phone 24/7 because nobody plans for a gate to fail on a Sunday night. Call (903) 417-0793 and you’ll talk to a live person who can schedule you with a trackable arrival window, not a voicemail. Every job starts with a written price agreed before a single bolt is turned.
Why Calder Gate Repair Is Frisco’s Preferred Gate Repair Company
Frisco homeowners tend to call us after they’ve already had a “quick fix” that didn’t hold. We hear the same story from Stonebriar to The Trails: another company straightened the gate panel, charged a fee, and six weeks later the gate dragged again. The difference is that our crews treat the gate as a system, not a single bent piece of metal. Calder Gate Repair is the gate specialist inside the Relay Home Co. family, and our technicians are background-checked, uniformed, and cross-trained on nine major gate opener brands so we’re not learning on your driveway.
Our crews serve Frisco directly from the Dallas-Fort Worth dispatch office, and you get a live arrival time you can track from your phone. That’s the Relay Standard: live arrival updates, before-and-after photos, and a digital invoice you pay from a link. And every Frisco repair carries the 365-Day Done Right Promise in writing. If the repair fails within 365 days, Calder returns at no charge. Not a prorated credit. A free second visit. Owner Nico Alvarez set that standard, and it’s the same on every job we book in Frisco.
Metal Gate Repair in Frisco
Metal Gate Repair in Frisco usually means one of three jobs: fixing or replacing a hinge post that has shifted, straightening a welded frame that’s sagging, or repairing the operator mounts that connect a LiftMaster, DoorKing, or Viking opener to a steel or iron gate. Frisco’s blackland clay soil creates a specific problem here, because the ground swells when wet and shrinks when dry, and that movement travels straight into the post footings. A gate that scrapes the driveway today often had a rock-solid post five years ago.
Hinge and Post Replacement
When a post shifts in expansive clay, tightening the hinge bolts is not enough. The post has to be dug out, the footing poured deeper or wider, and the post re-set and plumb before the gate is re-hung. Most hinge and post repairs in Frisco run $550 to $1,400 per post, depending on the footing size and whether concrete removal is involved.
Weld and Rust Repair
Frisco’s humidity doesn’t help steel gates that sit near sprinklers or pool equipment. Rust at the bottom corners is common, and it weakens the frame until a hinge tears. We grind back to clean metal, weld in reinforcement plate, and repaint so the repair blends. Small rust repairs start around $250 to $450. A weld repair to a structural joint on a double gate runs $400 to $900.
Wood Gate Repair in Frisco
Wood Gate Repair in Frisco often involves a different failure mode than the metal version. Cedar and pine gate frames soak up moisture during Frisco’s wet springs, then bake hard in the summer heat, which loosens joints and warps stiles. A wood gate that no longer latches in June was probably showing hairline cracks in March. We re-frame rotted sections, replace pickets and rails, and re-align the hinge geometry so the gate sits square under its own weight instead of leaning on the latch.
Realignment and Sag Correction
Most wood gate sag on a double driveway setup comes from a diagonal brace that was never installed correctly, or from post movement in clay. We re-set posts where needed, replace the brace, and re-tension any drooping hinges. A wood gate realignment in Frisco typically runs $275 to $650 per gate leaf.
Gate Lock Repair
Frisco’s extreme temperature swings wear out gate locks faster than you’d expect, especially keyed locks that sit in direct afternoon sun. We replace or rebuild lock mechanisms, adjust the strike plate alignment, and make sure the lock still turns smoothly when the gate is under load. Lock repair in Frisco usually runs $150 to $350.
Trusted Brands We Service in Frisco
We work on most gate operators a Frisco homeowner is likely to own, including Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, and Linear. When a Viking unit on a slide gate loses its limit setting or a Ghost Controls arm stops auto-reversing at the right point, our techs know the programming menu well enough to skip the guesswork. We keep common control boards, safety edges, and photo-eye sensors stocked and staged for Frisco service calls, which means fewer return trips and a faster turnaround when your gate is down. See our Gate Repair service page for the full scope of what we cover.
Common Gate Repair Problems We See in Frisco Homes
- Post movement from blackland clay. Frisco’s soil doesn’t hold still. A gate that drags or latches wrong is frequently a post that has tilted a few degrees in the ground, and until the footing is re-set, every other repair is temporary.
- Limit switches drifting after temperature swings. Hot days followed by cool nights, plus occasional heavy rain, cause slide gate operator settings to wander. The gate stops short of fully closed, or over-travels and grinds against the end stop. The rack and pinion is usually fine; the programming needs a reset.
- Loop detectors and safety eyes failing after rain. Frisco gets intense rainfall events, and a buried driveway loop or a waterlogged photocell housing will cause the operator to refuse to auto-close or to reverse for no visible reason. That’s a UL 325 entrapment-safety fault, not a nuisance, and it needs to be fixed correctly.
- Sagging double swing gates. The center of a double gate tends to droop when one post moves more than the other. You’ll see a gap at the top or bottom, and the latch won’t align. Forcing it stresses the opener arm and shortens the motor’s life.
Pricing for Gate Repair in Frisco, TX
Here’s what to expect for common gate repair work in Frisco. Gate opener troubleshooting on brands like Ghost Controls or DoorKing runs $125 to $250 for the service visit and diagnosis. Hinge or post repair on a swing gate runs $550 to $1,400 per post. Gate realignment runs $275 to $650 per leaf. A full operator replacement, including hardware and programming, typically lands between $850 and $1,800 depending on opener brand and gate weight. We quote every job in writing before work starts, and because we’re the gate specialist inside the Relay Home Co. network, the number on your invoice matches the number you approved. Call (903) 417-0793 and we’ll give you an exact price on the phone for many common repairs.
We Also Serve Cities Near Frisco
Our Gate Repair in Frisco crews also cover Prosper, Aubrey, Little Elm, and Celina. If you live just outside Frisco city limits, you get the same 365-Day Done Right Promise, the same live 24/7 phone line, and the same written price before work begins. We schedule daily routes through North Collin County, so response times stay tight.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Frisco
Because the post footing in the blackland clay is moving, not the gate panel. A shop that straightens the panel and skips the post will fix the sag for a few months, then it comes back. The permanent repair in Frisco is to re-set the footing, plumb the post, and then realign the gate. Call (903) 417-0793 and we’ll tell you on the phone whether your sag looks post-driven.
A typical operator installation takes four to seven hours on site, plus scheduling. If you need a concrete pad poured or conduit run for power, plan for a return visit after the concrete cures. We never promise same-day turnaround on installations, because measuring, anchoring, wiring, and safety-edge testing have to be done in the right order. The price is written and agreed before any work starts.
Yes. Photoelectric sensors or an equivalent reversing device are required and an operator that doesn’t auto-reverse on contact is a UL 325 entrapment hazard. This matters in Frisco neighborhoods where kids play near driveway gates. We run a reversal test on every operator repair before we call a job done.
We’re factory-familiar with nine brands, including Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. If your gate opener is one of these brands, we know its programming and parts. If it’s something else, we’ll tell you honestly what we can and can’t do before you pay for a visit.
Usually the limit setting is off, or the safety eye has moved slightly and it’s sending a false obstruction signal. We check the limit settings in the operator menu, then test the photo eyes at the closing edge. It’s a quick diagnosis on most DoorKing and Viking slide operators. Call (903) 417-0793 and we’ll walk you through what to check before we dispatch.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Frisco with written pricing and the 365-Day Done Right Promise on every job.