Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hitchcock
Most gate repairs in Hitchcock take one to two hours on site, and we typically have a technician at your property the same day you call. Calder Gate Repair is part of the Relay Home Co. family, and we know how a dead gate opener or a sagging swing gate on FM 2004 turns a routine day into a headache. Our crews work the neighborhoods around Delaney Road, Hughes Road, and the stretch of Highway 6 through Hitchcock, so we’re familiar with the soil, the weather, and the way gates fail here. Call (903) 417-0793 and you’ll talk to a live person, not a recording.
Why Calder Gate Repair Is Hitchcock’s Preferred Gate Repair Company
Hitchcock homeowners don’t want a gate company that treats them like a ticket number. Our techs know that a ranch off FM 2004 has different problems than a house on a quarter-acre lot near the school. We see the same failure patterns repeat across Hitchcock: battery terminals corroded by salt air, hinge posts settling into soft ground after a week of rain, photo eyes misaligned by a mower bump. That local familiarity means we diagnose faster and quote honestly the first time.
Every technician that rolls up in Hitchcock is background-checked, uniformed, and dispatched with a live arrival time you can track on your phone. We train on nine major opener brands, including FAAC, BFT, Linear, and Viking, so the repair isn’t a learning exercise at your expense. Nico Alvarez leads the team with a simple rule: written price before any work starts, written guarantee on every repair, and a free second visit if the fix fails within the 365-Day Done Right Promise window.
We don’t ask you to guess when we’ll show up. You get a real ETA, then before-and-after photos and a digital invoice you can pay from a link. That’s the Relay Standard, and it applies on every call in Hitchcock.
Driveway Gate Repair in Hitchcock
Driveway gate repair in Hitchcock usually comes down to one of three things: a gate that sags and drags, an opener that works intermittently, or a hinge that’s pulled away from the post. On rural lots here, the problem is often the ground itself. Hitchcock’s clay-heavy soil absorbs rain fast, then shifts as it dries. A hinge post set in an undersized footing will slowly lean, and the gate starts binding at the latch side. We see it on properties along Hughes Road and throughout the 77563 area every season. Most driveway gate repairs run $180 to $340 before parts, and we quote that number in writing before turning a bolt.
Hinge and Post Repair
When a gate sags, the hinge is usually the first casualty. We replace bent or seized hinges, reinforce the post with proper concrete, and re-hang the gate so it swings level. On soft Hitchcock ground, we check the footing depth before anything else, because a new hinge on a wobbling post just moves the problem six months down the road.
Gate Realignment
Realignment means bringing the gate back to square so the opener doesn’t fight the weight of the gate. We level the post, adjust the hinge gaps, and re-test the opener’s force settings. A gate that’s out of line will trip the safety reverse constantly, and no amount of reprogramming fixes geometry. This job typically runs $120 to $200 on a standard single swing gate in Hitchcock.
Gate Welding in Hitchcock
Gate welding in Hitchcock is often the difference between replacing a gate and keeping one. Steel and aluminum gates take real abuse here: coastal humidity accelerates rust, and a gate that scrapes the driveway gets cracks at the weld joints. We weld cracked frames, re-anchor broken hinges, replace rusted pickets, and rebuild corners that have separated. Welding repairs for the typical Hitchcock driveway gate run $150 to $300, which keeps most repairs well under the cost of a new gate.
Weld and Rust Repair
Rust along the bottom rail is the most common call we get from Hitchcock properties, especially on older ornamental steel. We cut out the bad section, weld in fresh steel, and treat the repair so it doesn’t start flaking again. On coastal lots, we recommend a marine-grade primer and paint as part of the repair, because a bare weld in this air rusts within months.
Frame and Corner Reinforcement
A gate that’s been dragging for a year usually has cracked corners and a bowed frame. We’ll straighten what’s salvageable and reinforce the corners with gussets. If the frame is too far gone, we’ll quote you a partial rebuild before we suggest full replacement. Either way, the number is written down before we start.
Trusted Brands We Service in Hitchcock
We work on gate openers from FAAC, BFT, Linear, Viking, and five other major brands, covering essentially every opener you’ll find on a Hitchcock driveway. Solar-powered FAAC and BFT units are common out here, and we carry replacement batteries, control boards, and photocells for those systems locally in the Houston metro. That means a repair on FM 2004 doesn’t wait a week for a part to ship from Dallas. If your opener is dead, we can usually have it running the same visit.
Common Gate Repair Problems We See in Hitchcock Homes
- Solar battery failure from coastal air. Salt-laden humidity corrodes battery terminals faster than inland Texas. We see openers that work in the morning and go dead by noon, and the battery usually tests fine until it’s under load. Replacing it with a marine-rated unit solves most intermittent failures.
- Sagging swing gates after heavy rain. Hitchcock’s clay soil swells when wet and shrinks when dry. A post set without sufficient concrete will lean within a season, and the gate starts dragging against the latch post. We re-set the post with proper depth and let the footing cure before re-hanging.
- Rack and pinion misalignment on slide gates. After a big storm, driveway grading shifts and the rack pulls out of alignment with the pinion gear. That strips gears and triggers false stops on the loop detector. We re-align the track and rack, then re-test the entrapment safety loop.
- Photo eye false triggers at dusk. The low sun angle on west-facing Hitchcock driveways can blind older photo eyes and make the gate refuse to close. We reposition the sensors or replace them with units rated for direct sun exposure.
Pricing for Gate Repair in Hitchcock, TX
Here are honest numbers for what Hitchcock homeowners should expect. A standard gate opener repair runs $180 to $340 before parts, with common parts like photo eyes, control boards, and remote receivers falling between $40 and $220. Full opener replacement runs $650 to $1,400 installed, depending on whether it’s a solar or hardwired system. Welding repairs run $150 to $300, and hinge or post work typically falls in the $120 to $250 range. Every price is written down and agreed to before we start. Call (903) 417-0793 and we’ll walk you through the likely range for your specific opener.
We Also Serve Cities Near Hitchcock
If you’re on the edge of Hitchcock, we cover the surrounding area too. Our Gate Repair team handles calls in La Marque, Texas City, Santa Fe, and Dickinson, with the same written-price and guarantee policy. Whether you’re off Highway 3 in Texas City or out on a rural road near Santa Fe, call us and we’ll get you on the schedule.
Serving Hitchcock, TX - Our Local Coverage Area
We’re based in the Hitchcock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hitchcock
Most often, the gate is binding because it has sagged out of alignment, and the opener’s safety reverse is doing its job. A gate that scrapes the driveway or fights the hinges will trip the force sensor every time. On solar units, a weak battery produces the same symptom because the motor isn’t getting full voltage. A tech can diagnose which one it is in about 20 minutes. Call (903) 417-0793 to schedule a service call in Hitchcock.
Most repairs take one to two hours on site. Hinge and post work takes longer if concrete needs to cure, but we can usually get the gate operational the same day with temporary supports. Full opener replacements take about three to four hours. We’ll give you a real time estimate before we start.
Yes. Solar openers are more common in Hitchcock than most Texas towns because rural lots here often don’t have AC power run to the gate. We service solar FAAC, BFT, Linear, and Viking openers, and we carry replacement solar batteries and charge controllers for those systems. The salt air here chews through standard batteries, so we stock marine-rated units.
Usually, yes. A sagging gate almost always comes down to the post, the hinges, or the frame. We re-set posts with proper concrete footings, replace worn hinges, and weld cracked corners. If the frame itself is rusted beyond repair, we’ll quote a partial rebuild before we ever suggest a full replacement. Most sagging gates in Hitchcock are salvageable.
We repair FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. That covers the brands installed on most Hitchcock properties, and our techs carry common parts for all of them. We don’t need to order and return for most opener repairs.
Calder Gate Repair handles electric gate repair, automatic gate repair, hinge and post work, lock repair, and weld and rust repair across all of Hitchcock. Our techs know this area, from the rural lots off FM 2004 to the neighborhoods near Delaney Road, and we quote every job in writing before work begins. Call (903) 417-0793 for a free estimate, and you’ll reach a live person ready to schedule your repair.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Hitchcock, TX.