Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hitchcock, TX
Gate repair in Hitchcock, TX runs into a mix that keeps things interesting: coastal humidity, sandy soil, and fences built across a range of lot sizes from old ranch properties to newer subdivisions. Calder Gate Repair handles all of it, from dead openers to sagging swing gates, with written pricing before anything gets touched. If your gate is stuck, noisy, or refusing to close, call (903) 417-0793 and we’ll get someone out to look at it with a real arrival time you can track.
Why Hitchcock Homes Are Different
Hitchcock sits close enough to Galveston Bay that salt air works on gate hardware year-round. Hinges rust faster here than ten miles inland, and that corrosion creeps into opener arms, sensor brackets, and control board connections. We see it on older FAAC and Linear swing systems especially, where a rusted hinge changes the gate’s geometry and forces the motor to work harder until something fails. Sandy soil makes it worse for gates set near unpaved driveways or rural lots: a gate that drags or scrapes is often sitting on a post that shifted in loose ground. Homes off Highway 6 and around FM 2004 vary a lot in gate style, from simple chain-link driveway gates to heavier ornamental steel, and that mix means almost every job in Hitchcock starts with a quick look at how the gate sits before we touch the opener. Coastal wind can also push a gate off its limit switch, the small sensor that tells the gate when to stop, which is a common call for us here.
Our Main Hitchcock Services
Hitchcock homeowners usually call us about one of two things: a gate that won’t open or close, or an opener that’s making noise but not moving the gate. Here’s what each one involves.
Gate Repair in Hitchcock
A gate that drags, binds, or hangs crooked in Hitchcock is usually fighting rust, soil movement, or both. We fix hinges, reset posts, straighten frames, and replace rollers or wheels on sliding and cantilever gates, then realign the gate so the opener isn’t straining against it. On a sagging gate off FM 2004, the fix is often a combination of post resetting and hinge replacement before the gate ever moves smoothly again. Gate Repair in Hitchcock covers the full scope.
Electric Gate Repair in Hitchcock
Electric gates in Hitchcock fail in predictable ways: salt-air corrosion on wiring and limit switches, ants or moisture in the control box, and post shift from sandy soil. We troubleshoot the whole circuit, from breaker to motor, then replace only what’s actually bad. A gate that opens but won’t close on a property near the bay is frequently a corroded safety sensor or a misaligned limit switch, two fixes that don’t require a new opener. Electric Gate Repair in Hitchcock walks through what we check and what it costs.
Gate Opener Repair in Hitchcock
When the opener hums but the gate doesn’t move, or the remote stopped working overnight, we test the board, capacitor, and motor, then quote a repair price against replacement so you can decide. Hitchcock’s humidity gets into control boards through cracked housings, and we’ve replaced enough FAAC and BFT boards here to know exactly which symptoms point where before we order a part. Gate Opener Repair in Hitchcock covers diagnostics, parts, and the 365-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hitchcock
We stock common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most repairs are done same-day once diagnosed because we carry the boards, sensors, and remotes these systems actually use. See our brands for the full list.
Pricing for Gate Company in Hitchcock, TX
| Service | Typical range in Hitchcock |
|---|---|
| Gate opener gear or sprocket replacement | $180 – $290 |
| Replacement gate opener arm | $210 – $380 |
| New swing gate opener | $950 – $1,650 |
| New sliding gate opener | $1,200 – $2,000 |
| Complete gate opener replacement (mid-range) | $1,800 – $2,800 |
| Gate wheel or roller replacement | $140 – $300 per wheel |
| Weld repair to gate frame | $120 – $450 |
| Keypad or intercom installation | $160 – $420 |
| Full gate opener replacement with 2 remotes and keypad | $2,400 – $3,600 |
| Same-day emergency gate repair | $120 – $250 |
What pushes a Hitchcock quote toward the top of those ranges is typically rust damage that requires extra fabrication, a post that’s shifted and needs resetting, or a control board that’s beyond repair. Everyone gets a written price before any work starts, and the number on that sheet is the number on the invoice, full stop.
Neighborhoods We Serve in Hitchcock
We work across Hitchcock from the older lots near Highway 6 to the newer subdivisions and rural acreage around FM 2004. Most calls get a same-day or next-morning visit, and you’ll see a live arrival time on your phone before we pull up.
- The Highway 6 corridor
- FM 2004 residential and ranch properties
- Areas near Hitchcock ISD
- Neighborhoods south toward the bay
Service Area – Cities Near Hitchcock
We also run gate repair calls in the surrounding communities, including La Marque, TX, Texas City, TX, Santa Fe, TX, and Dickinson, TX. If you’re on the edge of Hitchcock, just call and we’ll confirm the route.
Serving Hitchcock, TX - Our Local Coverage Area
We’re based in the Hitchcock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hitchcock
Most Hitchcock calls get a same-day or next-morning visit. You’ll get a live, trackable arrival time from dispatch, not a four-hour window. Call (903) 417-0793 to check today’s schedule.
It depends on the property. Some Hitchcock subdivisions have covenants for gate height and style, and new gate installations may need a permit through the city. Repairs to an existing gate usually don’t. We can help with what to check, and your written quote covers the work itself.
Yes. We dispatch technicians trained on the whole gate system, from hinges and posts to limit switches and control boards. One visit, one written price, and the 365-Day Done Right Promise covers the repair for a full year.
If your gate is down in Hitchcock, call (903) 417-0793. A live person answers, schedules the visit, and gets you a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hitchcock Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.