Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Texas City, TX
Calder Gate Repair is the gate company Texas City homeowners call when a driveway gate stops opening, a keypad goes dark, or a welded frame starts pulling away from its hinges. We answer live, 24/7, at (903) 417-0793, and our technicians arrive in uniform with a trackable arrival time, not a four-hour window. Gate work in Texas City is shaped by coastal humidity, sandy soil, and neighborhoods built in waves from the 1950s onward. Our three core services, gate repair, electric gate repair, and gate opener repair, each have their own detailed Texas City page linked below.
Why Texas City Homes Are Different
Texas City sits on low, flat ground just off Galveston Bay, and that gets into every gate we service. The air carries salt and moisture year-round, which means galvanized steel and cheap powder coating age faster here than they do twenty miles inland. Hinges rust at the weld points first. Limit switches, the small sensors that tell a gate opener motor when to stop, get cranky from humidity and grit. Homeowners in older pockets like the neighborhoods near 6th Street and the Moses Lake area often have gates that were poured and welded long before modern opener retrofits, so we plan for uneven concrete pads and square tube frames that have shifted slightly over the years.
Driveway gate posts set in sandy, shifting soil settle out of level, and an opener motor has to work harder against a gate that no longer swings true. We set posts accordingly and check slope and gap clearances as part of any Texas City job, because skipping that step is how a brand-new opener burns out in two years. Some subdivisions around the city have HOA rules about gate fascia and setback, and we are used to working alongside those. A rusted hinge or a sagging weld here is not a cosmetic issue. It is a fix that should be scheduled, not deferred.
Our Main Texas City Services
Most Texas City calls start with one of two issues: a gate that does not respond, or a gate that grinds and stops mid-travel. Below are the three service lines we run in Texas City, each with its own page and its own local detail.
Gate Repair in Texas City
Gate repair in Texas City usually means mechanical work: worn hinges, sagging frames, failed weld points, and gates that drag on driveways that have shifted with the sandy soil. We do a full weight-and-alignment check as part of every repair because a gate that is off balance destroys even a good opener motor. Coastal moisture accelerates rust at fastener points here, so we stock replacement hardware that holds up to salt air. Gate Repair in Texas City
Electric Gate Repair in Texas City
When there is electrical or control trouble, our electric gate repair calls in Texas City tend to involve wiring that has been compromised by moisture, breaker trips, or photo eye sensors that were never properly sealed. We trace circuits, replace wiring that has degraded, and verify safety edges and loops before we call a job complete. A gate that opens halfway and stops here often traces back to a component that has been fighting humidity for years. Electric Gate Repair in Texas City
Gate Opener Repair in Texas City
Gate opener repair in Texas City is the one homeowners call about when the motor runs but nothing moves, or when the remote works only from ten feet away. We work on a wide range of brands and stock common opener parts locally, and we diagnose the difference between a board fault, a capacitor, and a broken limit switch before quoting a number. In our experience, an opener on the Texas City coast fails more often from corrosion than from normal wear, so we protect seal points on every install we touch. Gate Opener Repair in Texas City
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Texas City
Our Texas City techs work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common Linear and Viking opener parts on the truck, because those two show up constantly in Texas City driveways. DoorKing and Ghost Controls boards are typically available next-day. You can see the full list on our brands page.
Pricing for Gate Company in Texas City, TX
These are the ranges most Texas City gate jobs fall into, before any parts that may be needed. Parts are quoted separately and agreed before we order them.
| Service | Typical range in Texas City |
|---|---|
| Gate opener repair | $185 – $395 |
| Gate opener replacement | $950 – $1,600 |
| Electric gate repair | $220 – $470 |
| Gate hinge replacement | $180 – $350 |
| Gate frame or weld repair | $260 – $540 |
| Gate wheel replacement | $150 – $280 |
| Gate opener motor swap | $340 – $620 |
| Limit switch replacement | $145 – $230 |
| Safety sensor or photo eye repair | $160 – $285 |
| Remote or keypad programming | $95 – $150 |
What pushes a Texas City job toward the top of a range is usually salt corrosion, a post that has settled out of level, or a gate that is too heavy for the opener it was paired with years ago. Every price is written before we start, and the number on the invoice is the number we agreed to at the door.
Neighborhoods We Serve in Texas City
We work across the full Texas City footprint, from bayside subdivisions to the older streets near the levee and the neighborhoods around Bay Street Park. Most Texas City addresses get same-day or next-day scheduling, depending on parts and the time of the call. Some of the neighborhoods we serve regularly include:
- Moses Lake area
- Neighborhoods near 6th Street
- Homes around Bay Street Park
- Subdivisions near the Texas City Dike approach
- Areas off 24th Street
Service Area – Cities Near Texas City
Beyond Texas City, we run gate repair routes into the neighboring communities along the Highway 146 and I-45 corridors. We serve La Marque, TX to the west, Hitchcock, TX further out, Dickinson, TX to the northwest, and Bacliff, TX across the bay side. If you are near Texas City but not certain you are in the service area, call us and we will confirm it live.
Serving Texas City, TX - Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Texas City
Most Texas City calls are scheduled same-day or next-day, depending on when you call and what parts we need. We do not give vague windows. You get a live, trackable arrival time, and our technician shows up uniformed and background-checked.
Most Texas City gate repairs do not need city permitting, but some subdivisions with active HOAs have rules about gate style, height, and fascia. We can tell you what we are likely to run into and we can provide the repair documentation your board may ask for.
The 365-Day Done Right Promise is a written guarantee on every repair we perform in Texas City. If the repair fails within 365 days, we return at no charge. You also get a written price before any work begins. Call (903) 417-0793 for scheduling.
If your gate is stuck, grinding, or simply stopped responding, call Calder Gate Repair at (903) 417-0793. A live person answers, we quote a written price before any work starts, and every repair is backed by the 365-Day Done Right Promise. Led by Nico Alvarez, our Texas City crews are dispatched with a trackable arrival time and the parts to fix most jobs on the first visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Texas City Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.