Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hurst
When a gate stops opening in Hurst, you need a repair crew that knows why it failed, not just how to temporarily prop it back up. That’s the difference between a fix that lasts two months and one that lasts years. Calder Gate Repair serves homeowners throughout Hurst with technicians who understand the local soil, the typical 1970s and 80s home construction, and the gate opener brands most common in this part of Tarrant County. We answer the phone with a real person, give you a written price before any work starts, and back every repair with our 365-Day Done Right Promise. If your gate is sagging, dragging, or refusing to open, call us at (903) 417-0793 and we’ll get someone to your Hurst home fast.
Our focus is simple: diagnose the root cause, explain it in language you don’t need a manual to understand, and fix it so it stays fixed. Part of the Relay Home Co. family, established in 2009, we bring factory-level familiarity with nine major opener brands and a level of scheduling transparency that most Hurst homeowners tell us they’ve never experienced from a gate company. You’ll know who is coming, when they’ll arrive, and exactly what the job costs before a single bolt is turned.
Why Hurst Homeowners Call Calder Gate Repair First
Hurst isn’t a city of identical tract homes. Drive through neighborhoods like Hurst Hills, Bellaire Park, and the streets east of Precinct Line Road, and you’ll see gates attached to homes built decades apart, with different posts, different soils, and different opener generations. We know those differences because we work in them every week. That local familiarity means our troubleshooting starts with the likely culprit, not a generic checklist.
When you book with us, you’re not waiting on a vague four-hour window. We dispatch background-checked, uniformed technicians with a live, trackable arrival time that you can follow from your phone. That’s part of The Relay Standard, the booking-to-invoice experience we built so you never sit around wondering where your tech is. You get before-and-after photos, a digital invoice you can pay from a link, and a written price before anything starts. Our Hurst customers consistently mention those details when they refer us to neighbors.
And here’s the guarantee that matters most when you’ve already been burned by a gate repair that didn’t hold: every job carries our 365-Day Done Right Promise, stated in writing. If the repair fails within 365 days, we return at no charge. Not a pro-rated credit. Not a diagnostic fee. We come back and make it right. Our Gate Repair team treats that promise as the bare minimum standard for every single visit in Hurst.
Metal Gate Repair in Hurst
Metal Gate Repair in Hurst usually comes down to one of three things: a hinge post that has moved, a weld that has cracked under repeated thermal expansion, or a gate that was never properly reinforced for its own weight. In neighborhoods where 40-year-old steel gates sit on original posts, we see all three together more often than any of them alone.
Here’s what a proper metal gate repair looks like when we do it in Hurst. First, we check the post footing itself. Most gates in this part of the metroplex were set in shallow concrete decades ago, and North Texas clay does not sit still. If the post has shifted, no amount of panel realignment will hold. We reset the post, re-level the gate panel, repair or replace worn hinges, and then address any welds that need attention. Most metal gate repairs in Hurst run $350 – $750, with post resetting and welding pushing toward the higher end. You get a written quote before we start, and that quote is the price.
Welded Steel and Iron Resets
When a steel gate starts dragging on the latch side, the frame has usually racked slightly out of square. We correct the sag by addressing the hinge post and the frame geometry together. Piecemeal fixes here don’t work. If the original post footing was shallow, we reset it properly before any panel work begins.
Weld and Rust Repair
North Texas swings from 100°F summers to freezing winters, and steel expands and contracts with every season. That stress concentrates at welds, especially on heavier ornamental gates. We grind out failing welds, re-weld with proper penetration, and treat rust spots that have started around hinges and latch hardware in Hurst’s humid spring months.
Wood Gate Repair in Hurst
Wood Gate Repair in Hurst tends to involve a different failure pattern than metal. With wood gates, the panel itself usually fails first: pickets rot at the bottom, rails split at fastener lines, or the whole panel swells and binds against the frame after heavy spring rains. But the hinge post problem is still there underneath, and ignoring it guarantees the new panel sags within a year.
Wood gate repairs in Hurst typically run $280 – $600 depending on whether we’re rebuilding a rail-and-picket section, replacing a rotted post, or re-hanging a panel that’s gone out of square. We match lumber dimensions and species where possible, and we always check that the gate is weighted correctly for its hinges. A wood gate that’s overbuilt for its hardware will pull screws loose within months.
Post Replacement and Realignment
The most common wood gate failure we see near Hurst homes is a rotted post bottom. Water pools at ground level, wicks up through the end grain, and the post loses its grip on the concrete footing. We remove the old post, set a new one in proper concrete, and re-hang the panel clean. No shims, no “good enough for now” bracing.
Panel and Pickets Rebuild
When the panel is beyond saving, we rebuild it. That means new rails, new pickets, correct hardware, and a finished assembly that operates without dragging. We quote the full scope before starting, and the number we give you is the number on the invoice.
Trusted Brands We Service in Hurst
Hurst homes are full of gate openers from brands that were popular during different building booms. We service Viking units common in older custom homes off Cheek-Sparger Road, Linear openers that show up regularly in mid-2000s builds, and DoorKing operators that a lot of Hurst commercial properties and larger residential gates still run. Ghost Controls is another brand we see on newer DIY-installed gates that homeowners later need professionally corrected. Because we carry stock of common Linear and Viking control boards and limit switches for Hurst-area service calls, we can often complete a repair in a single visit rather than ordering a part and returning days later.
Common Gate Repair Problems We See in Hurst Homes
Here’s what consistently brings Hurst homeowners to us for gate repair, based on hundreds of service calls in this specific metroplex area:
- Hinge post movement in expansive clay soil: much of Hurst sits on clay that contracts in summer and swells after rain. Original posts set in shallow footings 40-plus years ago slowly shift, pulling the gate panel out of alignment until it drags or won’t latch. Any repair that ignores the footing will fail again.
- Heat-stressed opener control boards: consecutive 100°F North Texas summers take a toll on gate operator electronics. We see older LiftMaster and Linear boards with swollen capacitors or failed relays, especially in opener boxes that catch full afternoon sun facing west onto Precinct Line Road properties.
- Misaligned limit switches on older openers: the limit switch, the small sensor that tells the gate when to stop, drifts over time on units from the 1990s and early 2000s. The result is a gate that over-travels, slams, or reverses mid-cycle for no apparent reason.
- Unnoticed safety photocell failures: most Hurst homeowners never know their safety edge or photocell failed until a gate touches something it shouldn’t. UL 325 requires entrapment protection on every automatic gate, which is why a proper repair always includes reversal testing, not just a panel fix.
We were called to a home near Hurst Hills just off Bedford-Euless Road after a LiftMaster-equipped swing gate started dragging and reversing mid-travel. Our tech found the hinge post had shifted in the clay soil, so the panel was binding in the frame; we corrected the sag by resetting the post footing, re-leveled the swing gate, then tested the safety photocell and gate operator reversal under UL 325 before calling it done. The gate has cycled cleanly since.
Pricing for Gate Repair in Hurst, TX
Here are honest ranges for what Hurst homeowners can expect, based on real service volume in this market. Basic hinge and latch repairs start around $180. Panel realignment jobs typically run $250 – $450. Hinge post resets with new concrete footings land in the $450 – $800 range because of the digging, concrete, and re-hanging required. Full metal or wood panel rebuilds on a double driveway gate run $500 – $1,200 depending on materials and size. Gate opener repairs for brands like Viking and Linear usually fall between $225 – $475 before parts, with control boards and gear assemblies adding $150 – $400 depending on the model. Every quote is written, every price is agreed before work starts, and the estimate is free. Call (903) 417-0793 and we’ll walk you through the likely scope for your gate.
We Also Serve Cities Near Hurst
If you’re just outside Hurst, we cover the neighboring communities too. Our Hurst service area extends into North Richland Hills, Bedford, Colleyville, and Haltom City, with the same written pricing, live arrival tracking, and 365-Day Promise applied to every job. If your gate is giving you trouble and you’re in one of those cities, call the same number and we’ll schedule you in.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hurst
Because the sag usually isn’t caused by the panel. In Hurst, the real culprit is usually the hinge post, which was set in a shallow concrete footing when your home was built decades ago. North Texas clay expands and contracts with seasonal moisture changes, slowly shifting the post until the gate drags or won’t latch. If you only fix the panel and leave the post, the gate will sag again within months. We start every sag repair at the post footing, not the gate surface. Call (903) 417-0793 and we’ll explain exactly what’s happening with your gate.
A proper automatic gate repair includes the mechanical fix, the operator check, and a UL 325 safety test. That means correcting the hinge post or panel issue, verifying the opener’s limit switches and force settings, testing the safety photocells and edge sensors, and running a reversal test to confirm the gate stops and reverses under obstruction. Every Calder Gate Repair job in Hurst includes all of that, written in your quote before work starts.
No, and we wouldn’t try. Wood gates fail differently than metal ones. Wood rots at the post bottom, splits at fastener lines, and swells with moisture. Metal gates stress at welds and pull out of alignment when the post moves. The hinge post is often the common thread in Hurst, but the repair approach, materials, and tools are entirely different. Our techs handle both, and your quote will reflect the specific materials your gate needs.
Very likely yes. Our team is factory-familiar with nine major gate opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the overwhelming majority of openers in Hurst homes, from older Viking units to newer Ghost Controls self-installs. Tell us the brand on your opener when you call, and we’ll let you know if we need to bring a specific part.
Most common repairs, from hinge replacements to panel realignments, wrap up in two to four hours on site. Post resets with new concrete take longer because the concrete needs to cure before the gate can be re-hung and tested under load. We’ll give you a realistic timeline as part of your written quote, and our live arrival tracking means you’ll know exactly when your tech is pulling up to your Hurst home. Call (903) 417-0793 today for a free estimate.
Written by Nico Alvarez, owner at Calder Gate Repair, serving Hurst and the surrounding Tarrant County communities as part of the Relay Home Co. family since 2009.