Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Haltom City
If your gate won’t open, sags on its hinges, or makes a grinding noise every time the opener kicks in, you’re in the right place. Calder Gate Repair handles gate repair across Haltom City with written pricing before any work starts and a live arrival time you can track from your phone. Most repairs in the area are completed the same day, and our techs carry parts for LiftMaster, FAAC, Viking, and other major brands on the truck. Call (903) 417-0793 and you’ll talk to a real person, not a voicemail tree.
Why Calder Gate Repair Is Haltom City’s Preferred Gate Repair Company
Haltom City homeowners deal with a specific set of gate problems, and we’ve seen nearly all of them. Hail from spring storms cracks sensor housings. The clay soil under this part of Tarrant County expands and contracts enough to shift post footings by inches, which throws slide gate tracks out of alignment. These aren’t generic gate issues, and generic repair advice doesn’t fix them. Our Gate Repair team knows which failure patterns to check first in neighborhoods along Denton Highway, Fossil Creek, and the older streets off Broadway Avenue.
We’re part of the Relay Home Co. family, founded in 2009, and this location is independently owned and operated by Nico Alvarez. Every Haltom City customer gets the same three things: a written price before work begins, a written guarantee on the repair, and a free second visit if the repair fails within 365 days. That’s the 365-Day Done Right Promise, and it’s printed on every job ticket. No fine print, no “we’ll see what we can do.”
Metal Gate Repair in Haltom City
Metal Gate Repair in Haltom City is the service we field most often, and for good reason. The DFW hail alley pounds steel and aluminum gates every spring, and the expansive clay underneath keeps working against even well-set posts. A steel gate that gets pelted with hail won’t usually dent deeply, but the real damage shows up in the operator: water gets past cracked sensor housings and corrodes limit switches and circuit boards from the inside. Gate Repair in Haltom City work on metal gates typically runs $145 to $380 for hinge, bracket, or sensor repairs before parts. Full post resets with concrete work start around $400 and go up from there depending on access and gate weight.
Hinge and Post Repair
When a metal gate sags, the hinge post is almost always the culprit. In Haltom City, clay soil heaves after heavy rain and shrinks during dry spells, slowly pulling posts out of plumb. We straighten or reset the post, replace worn hinge bearings, and re-hang the gate so it latches cleanly.
Weld and Rust Repair
North Texas humidity and the occasional flooding low spots near Fossil Creek take a toll on powder coating. Once rust reaches the welds, the gate’s structural integrity is compromised. We grind out rust, weld cracks, and re-coat the repair so it holds up through the next storm season.
Wood Gate Repair in Haltom City
Wood Gate Repair in Haltom City is a different animal from metal work. Cedar and pressure-treated gates in older Haltom City neighborhoods, particularly the 1960s and 70s housing stock east of Denton Highway, face two problems at once: the wood itself warps and rots, and the hardware anchored into the wood loosens every time the gate cycles. A typical wood gate repair here runs $165 to $320 for hinge replacement, frame straightening, and re-hanging. If the gate is too far gone, we’ll build the replacement frame and hang it with new hardware, which starts around $500 for a standard 12-foot driveway opening.
Gate Realignment
Wood gates absorb moisture, and once the frame twists, the latch stops catching. We pull the gate, reinforce the frame with steel brackets, and re-set the hinges so the gate swings level and the latch engages with a solid click. This also extends the life of your automatic opener, which fights against a misaligned gate every single cycle.
Reinforcing for Automatic Openers
If you’re adding an opener to a wood gate, the gate needs reinforcement plates behind every mounting point. We install steel backer plates so the opener arm doesn’t tear out of the wood under load. Without them, even a modest Ghost Controls or Mighty Mule operator will rip the screws loose within a season.
Trusted Brands We Service in Haltom City
Our technicians are factory-familiar with nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Haltom City customers, that means faster turnaround because we carry common sensors, control boards, and remote transmitters for these brands in our service vehicles. Viking and DoorKing are especially common on older Haltom City properties with long driveways and commercial-style track gates. Elite operators show up frequently on newer construction near North Beach Street. We diagnose brand-specific failures the first visit and don’t play the “we’ll order the part and come back in two weeks” game unless the part is genuinely obscure.
Common Gate Repair Problems We See in Haltom City Homes
- Post shift from expansive clay. Haltom City sits on the same clay formations as much of northeast Tarrant County, and gates set without deep concrete footings will drift out of alignment within a few years. We reset posts with footings below the clay’s active zone where possible.
- Hail and storm damage to operators. Spring hailstorms crack photocell housings and knock sensor alignment out of spec, which causes the gate to reverse mid-cycle or refuse to close. The fix is usually a new sensor plus a calibration pass on the opener’s force settings.
- Surge damage to control boards. Summer thunderstorms in this part of the metro bring lightning and power flickers that fry loop detector boards and control logic. A gate that opens fine but won’t close, or triggers for no reason, often has a surge-damaged board.
- Track and rack binding on slide gates. Slide gates on Haltom City properties with compacted clay driveways develop track misalignment faster than in areas with sandy soil. We re-level the track, adjust the rack mesh, and set the opener’s force limits so the gate moves without grinding.
Pricing for Gate Repair in Haltom City, TX
Here’s what gate repair in Haltom City actually costs. Sensor replacement runs $120 to $195 including the part. Hinge and bracket repair on a metal or wood gate runs $145 to $380. Opener control board replacement runs $225 to $450 for most residential brands. A full post reset with concrete and re-hanging starts at $400. And if your gate is beyond repair, a new residential swing gate installation with operator, safety edges, and UL 325 compliant entrapment protection typically runs $2,200 to $4,200. These are honest Haltom City market prices, not bait-and-switch numbers. You’ll receive a written quote before any work starts, and that’s the number you’ll pay. Call (903) 417-0793 for a free estimate on your specific gate.
We Also Serve Cities Near Haltom City
While this page covers Haltom City specifically, our crews also handle gate repair in Fort Worth, North Richland Hills, Hurst, and Bedford. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, but the technicians who arrive at your gate are local to the northeast Tarrant County area and know these streets well.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Haltom City
The hinge post itself is moving. In Haltom City’s expansive clay, surface-level fixes won’t hold because the post footing below ground is shifting with every wet-dry cycle. The actual fix is pulling the post, enlarging the footing, and setting it in concrete below the active clay zone. That’s a one-day job for us in most Haltom City yards. Call (903) 417-0793 and we’ll diagnose it on the first visit.
Yes, legally and practically. Automatic gate operators are required to meet UL 325 entrapment protection standards, which means either monitored photocells or a contact safety edge that reverses the gate when it hits an obstruction. If your Haltom City gate opens and closes without sensors, it’s out of compliance and a liability. We test every sensor installation after repair and show you the reversal test before we leave.
A swing gate rotates on hinges and moves in an arc across your driveway, so it needs clear space to swing. A slide gate rolls sideways on a track, which works better on Haltom City properties with sloped driveways or limited depth from the street. Slide gates are more common on larger lots near Fossil Creek, while swing gates dominate older neighborhoods off Broadway Avenue. We can install and service both.
Most common repairs, like sensor replacement, hinge repair, or opener calibration, take one to two hours and can be completed the same day we arrive. Post resets with concrete work take a day for the repair, plus a day of cure time before heavy use. We always give you the time estimate up front, and you’ll get a trackable arrival window when you book. For an exact timeline, call (903) 417-0793.
Yes. We service LiftMaster and FAAC operators on a regular basis across Haltom City, including models dating back over a decade. We carry common replacement boards, remotes, and sensors for both brands in our trucks, which means most LiftMaster and FAAC repairs are completed the same visit. If it’s a specialty part, we order it and return on a schedule you approve.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Haltom City and the surrounding Tarrant County area.