Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Haltom City, TX
Calder Gate Repair is the gate company Haltom City homeowners call when a driveway gate stops cooperating. Most jobs here involve swing gates on older ranch-style homes or sliding gates on newer builds along the Denton Highway corridor. If your gate is stuck, noisy, or refusing to open, call (903) 417-0793 and we’ll get a real person on the line who can tell you exactly what happens next.
Why Haltom City Homes Are Different
Haltom City’s housing stock spans several decades, and that shows up in the gate hardware we see. Homes built in the 1960s and 1970s around Broadway Avenue and Haltom Road often have heavier ornamental iron gates set on concrete footings that have shifted over time. That means hinge alignment issues are common, and a gate that scrapes the driveway is usually fighting a post that settled. Newer construction north of Loop 820 tends toward lighter aluminum gates with more sophisticated opener electronics, but the clay-heavy North Texas soil moves under both kinds. Seasonal temperature swings also play a role: the metallic expansion and contraction Haltom City gets every summer and winter slowly works bolts loose and stresses circuit boards in exposed motor housings. We plan for that on every visit.
Our Main Haltom City Services
Two calls dominate our Haltom City schedule: gates that will not open at all, and openers that run but fail to move the gate. Here is what each involves.
Gate Repair in Haltom City
Haltom City gate repair usually starts with finding why the gate binds, sags, or stops at the wrong point. We see rusted hinge pins on older ornamental gates, cracked welds at stress points, and rollers worn flat on slide gates. The soil movement in Haltom City means posts drift out of plumb and pull the gate with them. We diagnose the full motion path, then quote a written price before turning a single bolt. Gate Repair in Haltom City covers the full scope.
Electric Gate Repair in Haltom City
Electric gate work in Haltom City often comes down to interrupted power, failed circuit boards, or safety sensors knocked out of alignment by wind and heat. We trace the entire electrical path from the breaker to the motor, checking capacitor health and the limit switch – the small sensor that tells the gate where to stop. Haltom City’s summer heat can cook older transformers mounted in direct sun, so we check for thermal damage on every electric call. Electric Gate Repair in Haltom City walks through the process.
Gate Opener Repair in Haltom City
When the opener hums but the gate sits still, the problem is usually a gear, a belt, or a control board. We rebuild or replace opener internals on LiftMaster, Viking, Ghost Controls, and DoorKing units across Haltom City. Some boards can be repaired rather than replaced, which keeps cost down. Since every repair carries the 365-Day Done Right Promise, if that opener fails again within a year we come back at no charge. Gate Opener Repair in Haltom City has the details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Haltom City
We work on Viking, Ghost Controls, DoorKing, and Elite openers daily in Haltom City, and we keep common gears, boards, and remote receivers stocked locally for faster turnaround. If your opener is an older or discontinued model, see our brands page to check coverage.
Pricing for Gate Company in Haltom City, TX
| Service | Typical range in Haltom City |
|---|---|
| Service call diagnostic | $59 – $99 |
| Gate opener repair (labor only) | $145 – $295 |
| Gate opener circuit board replacement | $190 – $340 |
| Gate opener gear replacement | $175 – $290 |
| Limit switch replacement | $110 – $185 |
| Hinge repair or replacement | $130 – $260 |
| Weld repair (per stress point) | $90 – $220 |
| Slide gate roller replacement | $120 – $250 |
| Full gate opener replacement (parts included) | $550 – $1,100 |
Haltom City pricing runs toward the middle of these ranges because most neighborhoods are within a short dispatch loop and parts access is solid. What pushes a job higher is age-related damage on older gates around Broadway Avenue, where rust and settled posts complicate repairs. Whatever the number, you get it in writing before any work starts, and the invoice matches that quote.
Neighborhoods We Serve in Haltom City
We cover all of Haltom City, including the older blocks near Broadway Avenue where gate iron is thick and weathered and the newer streets north of Loop 820 where opener electronics dominate.
- Central Haltom City
- North Haltom City
- Broadway corridor
- Denton Highway area
- East of Haltom Road
Most Haltom City calls get a technician on site within a few hours, and you always get a live, trackable arrival time when you book.
Service Area – Cities Near Haltom City
We also serve Fort Worth, TX, North Richland Hills, TX, Hurst, TX, and Bedford, TX. If your gate is in any of these nearby cities, the same written-price promise and 365-Day Done Right guarantee apply.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Haltom City
Most Haltom City calls get a technician dispatched the same day, and emergency calls often arrive within a few hours. When you book, a live person gives you a trackable arrival time rather than a drawn-out window.
Most repair work on an existing residential gate does not need a city permit in Haltom City. If a full driveway gate installation is involved, we will tell you whether any filing applies so nothing is never left to chance.
We cover every Haltom City neighborhood, from the Broadway corridor to the newer streets near North Park. Scheduling is coordinated from the brand’s Dallas-Fort Worth office, with local crews serving Haltom City directly.
If your gate is giving you trouble, call Calder Gate Repair at (903) 417-0793. A real person answers, we quote a written price before any work begins, and every repair is covered by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haltom City Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.