Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in North Richland Hills, TX
Gate repair in North Richland Hills, TX comes with its own set of local conditions: clay soil that shifts with every wet-dry cycle, summer heat that bakes electronics inside opener housings, and neighborhoods built across several decades with very different gate hardware. We’re Calder Gate Repair, the dedicated gate specialist inside the Relay Home Co. family. When a swing gate starts dragging or an opener stops responding, call (903) 417-0793 and a live person answers, day or night.
Why North Richland Hills Homes Are Different
North Richland Hills sits on expansive clay soil, the kind that swells after spring rain and contracts hard in August. That movement is brutal on gate posts and hinges. We regularly see gates in neighborhoods like Holiday Hills and Home Town that worked fine in October binding by February, not because the opener failed, but because the post shifted half an inch and the gate now catches on the latch. The fix often starts with re-shimming hinges or adjusting the post base, not replacing the motor.
Housing stock here runs from 1960s brick ranch homes with original chain-drive openers to newer builds near the Iron Horse Golf Club area with current LiftMaster and Viking gear. Many properties sit on larger lots with long driveways, which means gate openers work harder and cycle more often than in denser suburbs. North Richland Hills also has active HOA communities where gate appearance and function are enforced, so a sagging gate is not just an eyesore, it can generate a letter. We quote the repair, do the work, and leave the gate opening and closing clean.
Our Main North Richland Hills Services
Most calls in North Richland Hills start as one of three problems, and each has its own dedicated page with pricing and details.
Gate Repair in North Richland Hills
Mechanical gate repair means hinges, posts, wheels, track, and the physical structure of the gate itself. In North Richland Hills, clay soil movement is the number one cause of metal fatigue at hinge welds and mounting bolts. We check the post footing, re-level the gate, and repair or replace hardware so the gate swings smooth instead of binding. A gate that scrapes the ground or wobbles on its post is working against the opener, and the opener eventually loses that fight. See the full breakdown on our Gate Repair in North Richland Hills page.
Electric Gate Repair in North Richland Hills
Electric gate repair covers the powered side: control boards, safety sensors, keypads, remotes, and wiring. North Richland Hills heat is a real factor here. Control boards mounted inside metal gate operator boxes can hit 140 degrees in July, and capacitors fail faster than they would in milder climates. We diagnose the exact component, explain what it does in plain terms, and replace only what failed. Full details are on the Electric Gate Repair in North Richland Hills page.
Gate Opener Repair in North Richland Hills
Gate opener repair focuses on the motor and drive mechanism: the arm on a swing gate, the chain or belt on a slide gate, and the board that runs them. We work on DoorKing, Linear, Viking, and Ghost Controls openers commonly found across North Richland Hills. The repair usually takes under two hours once the problem is identified, and we stock common parts for these brands on our trucks. Pricing and brand-specific notes live on the Gate Opener Repair in North Richland Hills page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Richland Hills
Our technicians train on nine major opener brands, and the ones we see most often in North Richland Hills are Linear, Viking, Ghost Controls, and DoorKing. We stock common replacement parts for these locally, which means most repairs finish same-visit. See our brands for the full list.
Pricing for Gate Company in North Richland Hills, TX
| Service | Typical range in North Richland Hills |
|---|---|
| Gate opener diagnosis and repair (labor) | $95 – $185 |
| Limit switch replacement | $140 – $260 |
| Control board replacement | $210 – $480 |
| Gate hinge replacement (per hinge) | $90 – $180 |
| Gate wheel or roller replacement | $75 – $165 |
| Safety sensor replacement | $110 – $240 |
| Keypad replacement or install | $130 – $295 |
| Remote programming or replacement | $50 – $125 |
| Full gate opener replacement (parts and labor) | $650 – $1,700 |
| Post re-leveling due to soil shift | $180 – $450 |
Soil-related post work is the biggest variable in North Richland Hills, since re-leveling a gate post can mean concrete work on top of hardware repair. Every quote is written, itemized, and agreed before any work starts. The number on the invoice is the number you approved.
Neighborhoods We Serve in North Richland Hills
We cover all of North Richland Hills, from the older streets near Holiday Lane to the newer developments around the Iron Horse Golf Club side of town. Typical response time across the area is 60 to 90 minutes for emergency gate calls.
- Holiday Hills
- Home Town
- Iron Horse Golf Club area
- North Hills
- Walker’s Creek
Service Area – Cities Near North Richland Hills
Beyond North Richland Hills, our crews cover the surrounding Tarrant County suburbs. We also serve Hurst, TX, Haltom City, TX, Bedford, TX, and Colleyville, TX. If your gate sits anywhere in this corridor, we can usually be there the same day.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Richland Hills
Most emergency gate calls in North Richland Hills get a technician on site within 60 to 90 minutes. Non-emergency repairs are scheduled around your day, and you get a live, trackable arrival time before we dispatch. Call (903) 417-0793 and a person answers.
Most HOAs in North Richland Hills only require approval for a full replacement or a change in gate appearance, not a repair using matching parts. If your HOA has a form, we can provide the spec sheet and photos after the job. Repairs that keep the gate looking the same rarely need pre-approval.
We can give a likely range over the phone once you describe the symptom, but the written quote happens on site after diagnosis. That quote is firm and itemized before any work begins. If the repair fails within 365 days, Calder returns at no charge under the 365-Day Done Right Promise.
For gate repair in North Richland Hills, call (903) 417-0793 for a free estimate. Written price first, real human on the line, and a live arrival time you can track.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.