Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
Gate repair in Keller usually falls into two camps: a wood swing gate that has dropped and drags, or an automatic opener that cycles but won’t run right. Most repairs we handle in Keller are done in a single visit, with the written price agreed before our technician touches a single bolt. If your gate is stuck, grinding, or refusing to close, call (903) 417-0793 and a live person will answer, 24/7. We know the neighborhoods here, from Marshall Ridge to Hidden Lakes, and we dispatch from the Dallas-Fort Worth metro office so a background-checked, uniformed tech reaches Keller quickly.
Why Calder Gate Repair Is Keller’s Preferred Gate Repair Company
Keller homeowners tend to research before they call. They have seen enough vague quotes and no-show windows to be skeptical, which is exactly why Calder Gate Repair works the way it does. Our Gate Repair team is part of the Relay Home Co. family, founded in 2009, and every Keller job carries three non-negotiables: a written price before work starts, a written guarantee on the repair, and a free second visit if the repair fails within the 365-Day Done Right Promise window.
What that means in practice is simple. You get a live, trackable arrival time, not a four-hour window. The technician is background-checked and in uniform. Before anything gets taken apart, you get the number in writing. After the job, the invoice is digital, you pay from a link, and the guarantee is in writing too. Nico Alvarez, who leads Calder Gate Repair, has structured the whole operation around removing phone tag and invoice shock from the experience.
Wood Gate Repair in Keller
Wood Gate Repair in Keller almost always comes back to one thing: the hinge post. Keller’s clay soil expands and contracts with every wet-dry season, and original 1990s posts set shallow or without proper drainage slowly lean, rot, or both. The gate panel itself is often fine, but it sags because the post underneath has moved. A repair that only replaces hinges or trims the gate bottom will fail again within a year if the post is not addressed.
Typical wood gate repairs in Keller run $260 – $520 depending on whether we are resetting a post, replacing a rotted post with a new footing, repairing split rail members, or re-hanging the panel. A full post replacement with concrete footing is usually at the upper end of that range because of the ground prep required in clay soil.
Post Replacement and Footing Work
When a hinge post rots or shifts, we pull the old post, excavate a deeper hole, set the new post in concrete with proper drainage, and re-hang the gate so it swings level. In Keller’s clay soil we also check the post about two weeks after a hard rain if the customer requests it, because fresh concrete can settle as the surrounding ground adjusts.
Sag Correction and Panel Re-Rigging
Sometimes the post is sound and the gate panel itself has loosened at the hinge points. We tighten, shim, and re-rig the panel, and if an opener is attached we re-align the arm so it is not fighting gravity. Fixing the panel without checking the post is how repeat calls happen, and nobody wants to pay twice for the same gate.
Driveway Gate Repair in Keller
Driveway Gate Repair in Keller covers both the big wood or iron drive gates in older subdivisions and the steel slide gates in newer gated communities. The most common failure we see on slide gates is a rack and pinion that has worn unevenly, or a loop detector that has drifted and no longer senses a car sitting on the drive. The operator ends up grinding, stalling, or reversing for no visible reason.
Driveway gate repairs in Keller typically run $280 – $600 before parts. Re-aligning a rack or replacing a worn pinion falls toward the lower end. Replacing a failed loop detector or rewiring a safety edge is usually in the middle. A genuinely dead operator, especially on a large steel gate, pushes toward the upper end because of the labor involved in re-building the drive assembly.
Slide Gate Track and Rack Alignment
A slide gate that hesitates or shudders usually has a rack out of true. We re-align the rack section by section, check the drive gear for wear, and adjust the motor torque so the gate moves smoothly. If the gate sits on a track, we also clear debris and re-check the guide rollers.
Safety Edge and Photocell Testing
Every driveway gate operator built to modern code must reverse when it senses an obstruction or a blocked photocell. On older Keller installs, we often find the safety edge was never wired, or the photocells are misaligned and have been bypassed. We test reversal force and sensor response on every driveway gate repair, and we document the results for you.
Trusted Brands We Service in Keller
Calder Gate Repair technicians are factory-familiar with nine major gate opener brands, so you do not get a tech squinting at a wiring diagram trying to figure out a foreign control board. In Keller, we regularly service FAAC hydraulic operators on estate drive gates, BFT and Linear slide gate operators on newer communities, and Viking operators on heavier commercial-style residential gates. We keep common control boards, remotes, photocells, and limit switches stocked locally for Keller jobs, which means fewer return trips and faster turnaround when parts are needed.
Common Gate Repair Problems We See in Keller Homes
- Clay soil shifting hinge posts. Keller’s expansive clay shrinks and swells with rain and drought. Posts set without allowance for that movement eventually lean, which is why a sagging wood gate here is rarely fixed by hinge tightening alone.
- Worn rack and pinion on slide gate operators. The combination of fine clay dust and heat means slide gate racks pick up grit and wear unevenly. The operator starts to grind, then stalls mid-travel.
- Loop detectors that no longer detect. A car sitting on the driveway should hold the gate open. In Keller we see aging loop detectors that have drifted out of calibration, causing the gate to close on a car or refuse to open on approach.
- Forgotten or bypassed safety features. On pre-2010 installs around Keller, safety edges and photocells were sometimes never connected. We test every repair against current UL 325 entrapment standards and walk the homeowner through what we checked.
Pricing for Gate Repair in Keller, TX
To be straightforward: a service call and diagnosis in Keller runs $89, and that amount is credited toward the repair if you approve the work. Most wood gate repairs land between $260 and $520. Driveway slide gate repairs run $280 – $600 before parts. A new opener installed on a standard driveway gate typically runs $850 – $1,400 depending on brand and power requirements, and a full gate replacement with new posts and opener starts around $2,200 for a simple single-swing wood gate. You will always receive a written price before any work begins, and the invoice will match that number. Call (903) 417-0793 for a free estimate over the phone.
We Also Serve Cities Near Keller
Our Gate Repair in Keller service area extends to the surrounding communities. We serve Haslet, North Richland Hills, Roanoke, and Southlake with the same written pricing, 365-Day Done Right Promise, and live trackable arrival times. If you are a few minutes outside Keller, call and we will route the nearest available technician to you.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
Because the hinge post is almost certainly moving or rotting below ground. Keller’s clay soil expands when wet and contracts when dry, which slowly works posts loose. Tightening hinges re-levels the gate for a few weeks, but the post will move again. The actual fix is resetting or replacing the hinge post with a properly sized footing, which is what we do on most wood gate repairs here. Call (903) 417-0793 and we can tell you over the phone whether your post looks like the culprit.
Put your gate in motion and block the photocell with your hand or a box in the gate path. The gate should stop and reverse immediately. If it does not reverse, or if there is no visible photocell at all, the entrapment protection is not functioning. On many older Keller installs we find safety edges were never wired or the photocells have been bypassed. We test reversal force on every repair call and document it, because a gate that does not reverse on a child or pet is a serious hazard.
Grinding is usually a worn rack and pinion or a drive gear that has picked up grit from Keller’s clay dust. When it stops halfway, the operator’s obstruction sensing is probably kicking in because the gate is binding. Continuing to run it makes the problem worse and can burn out the motor. We re-align the rack, inspect the pinion gear, clear the track, and re-set motor torque in one visit. A typical rack alignment and drive gear service in Keller runs $280 – $420 before parts.
In most cases we can repair it. We regularly rebuild LiftMaster swing arm operators and FAAC hydraulic units in Keller, and we stock common control boards, capacitors, limit switches, and remotes for both brands. Replacement only makes sense when the operator is over 12 – 15 years old and the control board has failed, or when the motor itself is burned out on a unit that has been through multiple repairs already. We will tell you straight which situation you are in, with the repair cost and the replacement cost side by side, before you spend anything.
Yes, for most repair work we do offer same-day or next-day service in Keller. If your gate is stuck open, stuck closed, or a safety feature has failed, call (903) 417-0793 and we will give you a live arrival window from the moment you hang up. Installations and full gate replacements are scheduled and priced in writing, never rushed, because that work involves ground preparation, power runs, and safety testing that should not be compressed into a single afternoon.
If your gate is sagging, grinding, or refusing to close, call Calder Gate Repair at (903) 417-0793 for a straight answer and a written price. We are in Keller regularly, we answer the phone with a person, and every repair is backed by the 365-Day Done Right Promise in writing.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family.