Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Manhattan Beach
Gate repair in Manhattan Beach usually costs $185 – $480 before parts, and most jobs are finished the same day we arrive. We work on everything from salt-corroded slide gates near The Strand to misaligned wood driveway gates in the Tree Section. If your gate is stuck, sagging, or the opener is straining, call (903) 417-0793 and a live person answers – not a voicemail, not a bot. Our Gate Repair crews know Manhattan Beach hardware because they see the same marine-layer failures week after week.
What makes gate repair here different is the salt air. It changes which parts fail, how fast they fail, and what actually fixes them for good. A generic repair that works in El Segundo won’t hold up four blocks from the sand. We’ll get into the specifics below.
Why Calder Gate Repair Is Manhattan Beach’s Preferred Gate Repair Company
Calder Gate Repair is the dedicated gate repair team inside the Relay Home Co. family, established in 2009. Each location is independently owned and operated under The Relay Visibility Guarantee. Led by Nico Alvarez, our Manhattan Beach crews carry the same three non-negotiable guarantees on every job: a written price before any work starts, a written guarantee on every repair, and a free second visit within the 365-Day Done Right Promise window if the repair fails.
We’ve rebuilt enough gates from the Sand Section to the Hill Section to know what corrosion looks like before the homeowner does. Manhattan Beach customers call us because we name the part, explain the failure, and put the number in writing before turning a single bolt. Our technicians are background-checked, uniformed, and dispatched with a live arrival time you can track from your phone – the Relay Standard, not a vague four-hour window.
When you call Calder Gate Repair in Manhattan Beach, you get a real person 24/7. We answer at 2 a.m. when your gate won’t close and your dog is eyeing the open driveway. We answer during a morning coastal drizzle when your opener board is glitching from humidity. That’s the standard.
Wood Gate Repair in Manhattan Beach
Wood Gate Repair in Manhattan Beach runs $220 – $540 depending on whether we’re re-hanging a sagging panel, replacing a rotted post, or rebuilding the hinge hardware. The marine layer near The Strand keeps wood gates damp for half the morning, which rots post footings and swells panels faster than anywhere inland. We see it constantly. By the time a wood gate drags on the latch side, the post has usually been wicking moisture from the base for two or three seasons.
The fix is never just “tighten the hinges.” We address the rot at the footing, replace wood with pressure-treated or cedar where it’s exposed, and set stainless hardware that won’t bleed rust streaks down the face of the gate.
Post Replacement and Footing Repair
In Manhattan Beach, a rotted hinge post usually means digging out the old footing, setting a new post in concrete, and letting it cure before the gate hangs. We quote this as a full repair, not a patch. Most post replacements near the coast run $340 – $700 including hardware and concrete work. We won’t hang a new panel on a post that’s already leaning – that’s a second repair waiting to happen.
Panel Realignment and Latch Work
Wood panels swell, shrink, and twist with coastal humidity. We re-align latch plates, trim swollen stiles, and adjust hinges so the gate closes without lifting. This is usually a faster job: $185 – $320, and we can often do it in one visit with parts on the truck.
Driveway Gate Repair in Manhattan Beach
Driveway Gate Repair in Manhattan Beach typically runs $260 – $650 depending on whether it’s a manual swing gate with a post problem or an automated slide gate with a seized operator. Driveway gates face the worst of the salt wind because they sit in the open, collecting chloride film every night the marine layer rolls in. Swing gates at beachfront walk-street properties are the worst: the hinge pins pit, the gate swings stiff, and the operator over-amps trying to move a gate that’s fighting its own hardware.
We repair the whole system, not just the visible symptom. That means checking post footings for hidden rot, replacing hinge pins and bearings with stainless, and re-checking the operator’s force settings after the gate moves freely again.
Slide Gate Track and Rack Repair
Slide gates near Manhattan Beach frequently bind because the rack and pinion corrode at the welds. The powder coat chalks, the steel underneath pits, and the operator strains until the gearbox burns out. We replace corroded rack sections, re-level the track, and reset operator limits so the gate rolls without dragging. Typical cost: $300 – $680.
Swing Gate Operator Repair
When a swing gate operator in Manhattan Beach overheats or trips constantly, the cause is usually a stiff gate, not the motor itself. We free the hinges, replace the cylinder anchor if it’s pitted from salt spray, and then service the operator. If the board is fried from moisture, we replace it and re-seal the housing. Repairs run $240 – $550 before the cost of any replacement board.
Trusted Brands We Service in Manhattan Beach
We’re factory-familiar with FAAC, BFT, Linear, and Viking openers – the four brands we see most on Manhattan Beach swing and slide gates, and the same brands we handle with our Gate Opener Repair in Manhattan Beach. That means we diagnose by the board’s fault pattern, not by guesswork, and we know which BFT capacitor tends to swell in coastal humidity and which FAAC limit switch fails first on salt-exposed slides. For Manhattan Beach customers, we keep common Linear and Viking sensors and FAAC hydraulic fittings stocked locally so repairs aren’t delayed waiting on a parts shipment from the distributor. If your opener is from a brand we didn’t name, call anyway – if it’s a major brand, we work on it.
Common Gate Repair Problems We See in Manhattan Beach Homes
- Hinge post footings that rot or rust from the bottom. Near the sand, moisture wicks up into the post base. The gate sags at the post while the panel still looks straight. By the time you see the lean, the footing is usually compromised.
- Weld seam corrosion on operator arms and track hardware. Galvanised and painted steel corrode at the weld seams first. The gate seizes mid-travel and the opener burns out its gearbox trying to push through the resistance. Inland LA gates don’t see this failure mode for years longer.
- Operator boards glitching from marine-layer humidity. Intermittent faults, failed entrapment protection, and gates that stop reversing are common near the coast. Circuit boards don’t like damp salt air, and neither do photocell lenses that have hazed over from chloride film.
- Stiff swing gates from pitted hinge pins and cylinder anchors. Salt wind pits the metal surfaces that bear load. The gate swings hard, the opener over-amps, and premature board failure follows. Freeing the hardware is often what saves the operator.
Pricing for Gate Repair in Manhattan Beach, CA
Here are the numbers we quote most in Manhattan Beach. A basic gate realignment runs $185 – $320. Hinge and post repairs run $220 – $540. Slide gate track and rack repair runs $300 – $680. Driveway gate operator service runs $240 – $550, and replacement boards or motors add $150 – $450 depending on the brand. Every price is written before work starts, and the invoice matches the quote – that’s the Calder standard, not an option.
| Repair Type | Typical Cost (Before Parts) |
|---|---|
| Gate realignment and latch adjustment | $185 – $320 |
| Hinge, post, and footing repair | $220 – $540 |
| Slide gate track and rack repair | $300 – $680 |
| Operator service and troubleshooting | $240 – $550 |
| Replacement control board or motor | $150 – $450 (parts) |
Call (903) 417-0793 for an exact quote. Estimates are free, and the number we give you is the number you pay.
We Also Serve Cities Near Manhattan Beach
Our Gate Repair in Manhattan Beach crews also cover Hermosa Beach, El Segundo, Lawndale, and Hawthorne. If you’re a few blocks over the Manhattan Beach border and your gate is binding or your opener is dead, the same Calder team handles it. Manhattan Beach is home base for dispatch, but the surrounding South Bay is our daily route.
Serving Manhattan Beach, CA - Our Local Coverage Area
We’re based in the Manhattan Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Manhattan Beach
A steel gate near the sand in Manhattan Beach typically needs hardware replacement every 3 – 5 years, while the same gate in inland LA can go 8 – 12 years before the welds corrode. The marine layer deposits chloride on every metal surface, and the corrosion starts inside the welds, where you can’t see it. If your gate is 5 years old and near the beach, have the post footings and weld seams checked even if it looks fine. Call (903) 417-0793 for a free estimate on a coastal corrosion inspection.
Galvanised steel with stainless fixings outlasts painted steel by roughly double in Manhattan Beach’s salt air. Paint chips, the exposed steel rusts, and the rust travels underneath the coating. Galvanising bonds to the metal itself. For replacement hardware – hinge pins, brackets, rack sections – we spec stainless steel, especially within a few blocks of The Strand. It costs more up front but you replace it far less often.
Swing gates sag near the beach because the hinge post footing wicks salt moisture upward and rots or rusts from the bottom. The post leans, the gate panel follows, and the latch stops lining up. The fix is a new post set in concrete with proper drainage, stainless hinge hardware, and a re-aligned panel. We see this constantly in the Sand Section. Call (903) 417-0793 and we’ll quote the post replacement before we dig.
Almost always, yes. On Manhattan Beach slide gates, the rack and pinion corrode at the weld seams, the track fills with grit and corrosion, and the operator pushes harder until it trips or burns out. We were called to a beachfront walk-street property near The Strand where a LiftMaster slide gate had stopped reversing and the tracks were binding hard. The powder-coated steel rack was chalking and the hinge post base had surface rust eating into the footing. We replaced the corroded hardware with stainless fixings, re-leveled the rack and pinion, and reset the operator limits. If your LiftMaster is straining, don’t wait for the gearbox to fail – call (903) 417-0793.
Yes. Automatic gates in Manhattan Beach, like everywhere in California, must comply with UL 325 entrapment protection standards, which means functioning photocells, edge sensors, or both. Marine-layer humidity and salt haze cloud photocell lenses and corrode sensor connections, causing intermittent failures that owners often don’t notice until the gate stops reversing on an obstruction. If your gate’s safety sensors are glitching, have them checked – this is a safety issue, not a convenience issue. Calder Gate Repair tests entrapment protection on every automatic gate repair we do. Call (903) 417-0793 for a safety check and quote.
Get Your Manhattan Beach Gate Fixed Today
If your gate is sagging, binding, or your opener is straining against salt-weakened hardware, Calder Gate Repair is ready. We serve every Manhattan Beach neighborhood, from The Strand walk streets to the Hill Section and the Tree Section. You’ll get a written price before any work starts, a written guarantee on the repair, and a free second visit within 365 days if it fails. Call (903) 417-0793 now – a live person answers, 24/7.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Manhattan Beach with gate repair, electric gate repair, and gate opener repair.