Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Edmonds, WA
Calder Gate Repair is the gate company Edmonds homeowners call when a sliding driveway gate stops mid-track or a swing gate won’t close at midnight. We handle every part of a residential gate system, from the welded steel frame to the opener board inside the control box. Most repairs in Edmonds run $240 – $480, and we put that price in writing before any work starts. Call (903) 417-0793 and a live person answers, day or night.
Why Edmonds Homes Are Different
Edmonds sits on a bluff above Puget Sound, and that geography shapes a lot of what we see. Homes in the Bowl, near Perrinville, and up along the Edmonds Way corridor sit on sloped lots, so driveway gates often carry extra weight on a grade. A gate that wasn’t hung square on a slope eats hinge bushings and puts strain on the opener’s gearbox. Salt air off the Sound is another factor: exposed steel rusts faster within a few blocks of the waterfront than it does five miles inland, so we replace more hinge brackets and powder-coated track hardware close to the marina.
Edmonds also has a huge stock of 1960s and 1970s homes with narrow side yards. Those layouts favor sliding gates over swing gates, and the tracks are often run right alongside a fence line that has settled over the decades. That means track alignment work is common here, not just opener swaps. Homeowners in the Edmonds Bowl and Seaview neighborhoods also deal with stricter visibility rules from the city on gate height near corner lots, so it’s worth checking before installing anything new.
None of this surprises us. It’s just the reality of gate work in a waterfront town with hills, older homes, and weather that tests every moving part.
Our Main Edmonds Services
Those three services cover nearly every call we get in Edmonds. Here’s what each one looks like on the ground.
Gate Repair in Edmonds
A gate that scrapes the ground, sags on its hinges, or won’t latch is a Gate Repair in Edmonds call. On Edmonds hilly lots, sagging hinges are the most common culprit, and we re-shim, replace, and re-hang steel and aluminum gates so they sit true. Salt air near the waterfront speeds up bracket corrosion, so we inspect mounting hardware even when the visible problem looks minor. If your gate drags, wedges, or wails when it moves, we find out why before we quote. Every repair carries the 365-Day Done Right Promise, which means a free return visit if the fix fails within a year.
Electric Gate Repair in Edmonds
When an automated gate stops responding to the remote, keypad, or intercom, that’s Electric Gate Repair in Edmonds. We trace the issue from the keypad all the way to the motor, checking limit switches, safety sensors, circuit boards, and the battery backup if one is attached. Edmonds winds off the Sound put extra strain on photo-eye mounts, and they’d rather aim at a stray hedge than across the driveway, so realignment is routine here. We diagnose before we replace parts, and you’ll never pay for a control board you don’t need.
Gate Opener Repair in Edmonds
An opener that hums but doesn’t move, runs the gate halfway, or reverses for no reason is a Gate Opener Repair in Edmonds job. We bench-test the gearbox, capacitor, and limit switches before we blame the motor, because a failed limit switch (the small sensor that tells the gate when to stop) often masquerades as a dead opener. Edmonds damp winters are hard on capacitor contacts, so cold-morning failures are a real pattern we see. If we service your existing opener and the fix doesn’t hold, the 365-Day promise brings us back at no charge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Edmonds
We field calls for Linear, Viking, Ghost Controls, and DoorKing most weeks in Edmonds, and we stock common boards, remotes, and limit switches for each. If a part isn’t on the truck, it’s usually here within two business days. You can see the full lineup on our brands page. In the meantime, if your remote stopped working this morning, a lithium battery and a reprogramming visit often solves it without a single new part anyway.
Pricing for Gate Company in Edmonds, WA
| Service | Typical range in Edmonds |
|---|---|
| Diagnostic visit (applied to repair if approved) | $60 – $125 |
| Gate hinge or bracket replacement (steel or aluminum) | $180 – $400 |
| Track realignment or straightening on slide gates | $200 – $550 |
| Limit switch replacement (part + labor) | $160 – $300 |
| Remote/keypad reprogramming or replacement | $80 – $200 |
| Battery backup replacement | $120 – $300 |
| Photo-eye sensor replacement or realignment | $110 – $230 |
| Full control board replacement | $250 – $600 |
| Complete gate opener motor replacement | $500 – $1,500 |
Two things push Edmonds pricing upward: salt-air corrosion near the Sound, and sloped driveways that turn a simple hinge replacement into a heavier job. You’ll get a written line-item quote before any work begins, and the number you approve is the number you pay.
Neighborhoods We Serve in Edmonds
We work throughout Edmonds, and we don’t route around the tight streets or the hilly ones. These are a few of the areas we’re in most often:
- Edmonds Bowl
- Perrinville
- Seaview
- Westgate neighborhood
- Edmonds Way corridor
Most Edmonds calls get same-day or next-day scheduling, and you’ll have a live, trackable arrival time on your phone, not a four-hour window.
Service Area – Cities Near Edmonds
Our crews also handle gate work just across the county line. We cover Mountlake Terrace, WA, Lynnwood, WA, Kenmore, WA, and Kingston, WA. If you’re in one of those areas, the same pricing, written guarantee, and live-person 24/7 line applies.
Serving Edmonds, WA - Our Local Coverage Area
We’re based in the Edmonds area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Edmonds
Most Edmonds calls are answered the same day they come in, with a live trackable arrival time sent before we head out. Emergency calls, like a gate that won’t close and leaves a property exposed, get priority scheduling. Call us at (903) 417-0793 and a real person handles it on the spot.
For most repairs, like hinge replacement, opener work, or track realignment, no permit is needed in Edmonds. Full gate replacements can trigger HOA review in neighborhoods like Seaview or the Bowl, so check your CC&Rs before any new install. We can walk you through what your HOA typically asks for.
Yes. Many Edmonds homes near the waterfront add battery backup or solar panels to their openers, and we service both. We check the charge controller, battery health, and solar input while we’re diagnosing the gate itself, since a weak battery reads a lot like a failing opener board on cold mornings.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edmonds Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.