Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Bruno, CA
Gate repair in San Bruno means working around steep driveways, coastal fog off the Pacific, homes built across several decades, and a city where many properties sit on hillsides that put real stress on gate hardware. Calder Gate Repair handles everything from a gate that won’t open to a full opener replacement, with written pricing you’ll see before any work begins. If your gate is stuck, noisy, or refusing to close, call (903) 417-0793 and a live person answers.
Why San Bruno Homes Are Different
San Bruno sits in the gap between South San Francisco and Millbrae, where the terrain rises quickly from El Camino Real toward Skyline Boulevard. That slope matters for gates. Driveway gates on hillside lots carry more weight on the downhill hinge, which wears out rollers and bends tracks faster than flat-lot gates in Millbrae or Brisbane. Pair that with the daily fog cycle – cool, damp mornings followed by dry afternoon sun – and you get the exact conditions that corrode cheaper gate hardware and cause circuit boards inside opener boxes to fail sooner than their rating suggests.
Housing here runs from 1940s bungalows in the older flatlands around San Bruno Avenue to 1970s and 80s homes up in the Crestmoor and Rollingwood neighborhoods. The older lots often have narrow driveways, which means gate posts, hinges, and operator arms sit close to the car and take more contact than they should. Some HOAs in the newer hillside developments have written rules about gate appearance and noise, which is worth checking before swapping hardware. None of it is unmanageable, but it does change what we stock on the truck and how we quote a repair.
Our Main San Bruno Services
Most calls from San Bruno homeowners fall into three buckets: mechanical gate work, electrical problems, and opener failures. Each has its own page here because the diagnosis, parts, and pricing differ.
Gate Repair in San Bruno
Mechanical gate repair covers the physical parts: bent tracks, sagging hinges, broken wheels, misaligned posts, and gates that drag on the concrete. In San Bruno we see a lot of track wear on sloped driveways and cracked wheels on heavier wood gates that have absorbed years of fog moisture. We align, replace, and reinforce the hardware, then test the full swing or slide cycle so the gate doesn’t strain the opener. Gate Repair in San Bruno has full pricing and what a typical visit includes.
Electric Gate Repair in San Bruno
When a gate moves but trips, buzzes, or stops mid-cycle, it’s usually electrical: a bad capacitor, corroded wiring, a failing limit switch, or a power supply that can’t hold voltage. San Bruno’s damp coastal air accelerates corrosion on exposed connections, especially for gates that have been installed more than seven or eight years. We trace the circuit, replace the failed component, and seal connections against future moisture. Electric Gate Repair in San Bruno walks through the common failure points and what they cost to fix.
Gate Opener Repair in San Bruno
Opener repair focuses on the motor unit and its controls: the logic board, remote receiver, safety sensor, keypad, and the arm that actually moves the gate. Linear, Viking, Ghost Controls, and DoorKing openers all show up on San Bruno driveways, and each fails in its own way. We carry repair parts for all of them and diagnose on-site before ordering anything. If you’re hearing the motor hum but the gate won’t move, see Gate Opener Repair in San Bruno.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Bruno
We work on the openers San Bruno homeowners actually have: Linear, Viking, Ghost Controls, DoorKing, and others. Common control boards, remotes, safety sensors, and limit switches are stocked in our service vehicles, which means most opener repairs finish same-day. See our brands for the full list of what we’re trained on.
Pricing for Gate Company in San Bruno, CA
| Service | Typical range in San Bruno |
|---|---|
| Gate repair service call + diagnosis | $75 – $125 |
| Gate opener repair (labor, before parts) | $180 – $340 |
| Electric gate repair (labor, before parts) | $160 – $320 |
| Hinge replacement (pair) | $90 – $180 |
| Track realignment | $120 – $220 |
| Gate opener replacement (labor only) | $250 – $550 |
| Safety sensor repair or replacement | $110 – $210 |
| Remote/keypad programming | $50 – $110 |
| Capacitor or control board replacement | $90 – $260 |
Prices in San Bruno shift based on driveway slope, gate weight, and how hard the access is. A heavy wood gate on a Crestmoor hillside takes longer to align than a light steel gate on a flat San Bruno Avenue lot. Whatever the job, you get the written number before we touch a bolt, and that number is what you pay.
Neighborhoods We Serve in San Bruno
We run jobs across the entire city, from the flat older blocks near downtown up into the hillside neighborhoods around Skyline. Typical response in San Bruno is same-day for opener failures and next-day for scheduled mechanical work.
- Rollingwood
- Crestmoor
- Huntington
- Portola Highlands
- Downtown San Bruno
Service Area – Cities Near San Bruno
Beyond San Bruno, we cross into the neighboring cities for scheduled work: Millbrae, CA, South San Francisco, CA, Pacifica, CA, and Brisbane, CA. Dispatch runs from our San Francisco Bay Area office, with crews based to serve San Bruno directly.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bruno
Most San Bruno calls get same-day or next-day dispatch. Opener failures and stuck gates get priority, since a gate that won’t close is a security problem, not just an inconvenience. Call (903) 417-0793 and a live person confirms the arrival window.
That depends on your HOA, not the city. Some hillside developments in San Bruno have rules about gate appearance, height, or noise. If you have an HOA, check its written standards before we swap any visible hardware. We can note any constraints on the estimate.
Yes, we cover the full city, including the hillside neighborhoods near Skyline Boulevard and the older flatlands close to El Camino Real. We also schedule work in Millbrae, South San Francisco, Pacifica, and Brisbane from the same dispatch desk.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bruno Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.