Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pecan Grove
Gate repair in Pecan Grove usually costs $180 – $340 for common fixes like limit-switch resets, hinge adjustments, and safety sensor realignment before parts. Full operator replacements run higher, and we’ll give you a written price before any work starts. If your gate won’t open, sags at the latch, or stopped reversing when something crosses its path, call (903) 417-0793 and a live person answers, day or night. Our Gate Repair team works across Pecan Grove from the Plantation Bend area down to Harvest Green, and we know exactly how this soil treats a hinge post.
Why Calder Gate Repair Is Pecan Grove’s Preferred Gate Repair Company
Pecan Grove homeowners keep our number because we show up when we say we will, with a trackable arrival time instead of a four-hour window. Every technician is background-checked and in uniform, and every call is answered by a real person at (903) 417-0793, 24 hours a day. Nico Alvarez built Calder Gate Repair inside the Relay Home Co. family, which has operated since 2009 with a single standard: you know who is coming, when they will arrive, and what the job costs before a bolt gets turned.
What sets us apart in Pecan Grove specifically is the 365-Day Done Right Promise. If a repair fails within a year, Calder returns and fixes it again at no charge. That promise is written on every job, not implied. We also carry parts for the opener brands Pecan Grove homes actually run: Viking, DoorKing, Ghost Controls, Elite, and more. When your gate goes down on a Sunday afternoon before a school pickup, the last thing you need is a parts wait. We stock what this area uses.
Commercial Gate Repair in Pecan Grove
Commercial Gate Repair in Pecan Grove means something specific here: gated entries on residential communities, HOA amenity access points, and small business lots along Grand Parkway and FM 359. These are slide gates more often than swing gates, and they take real abuse, hundreds of cycles a day, in heat and rain both. A commercial gate that won’t close is a liability, not just an inconvenience. When an entry gate on a Pecan Grove community fails, residents notice within an hour. Calder responds fast because we already know the equipment on most of these properties.
Slide Gate Track and Rack Repair
Slide gates in Pecan Grove fail most often at the rack and pinion, the toothed bar along the gate and the gear on the operator that drives it. After a storm pushes debris into the track, or the operator loses its limit settings, the gate skips out of mesh and can jam halfway open or slam its end stop. We realign the rack, clear the track, reset limits, and retest the full cycle. Typical cost for rack and pinion repair here runs $240 – $420 before parts.
Commercial Safety Sensor Correction
The UL 325 standard requires that any automatic gate reverse when it contacts an obstruction or when its photocells detect something in the path. Pecan Grove commercial gates frequently fail this check because a sensor gets bumped out of alignment by mowing crews, delivery trucks, or a post that has shifted in clay soil. Calder tests every commercial repair against UL 325 entrapment criteria before we call the job done. Sensor realignment and testing typically runs $150 – $280.
Iron Gate Repair in Pecan Grove
Iron Gate Repair in Pecan Grove covers the ornamental steel and wrought-iron gates on many of the custom homes in the older sections of the neighborhood, especially around the golf course streets and larger lots along Plantation Drive. These gates are heavy. They hang on welded hinge posts set in concrete footings, and Pecan Grove’s expansive clay works against those footings all year. When a post leans, the gate drags, binds at the latch, and eventually the operator burns out fighting the load. Iron gate work here means fixing the structure first, not just the motor.
Hinge Post Re-Setting and Sistering
When a hinge post leans out of plumb, the fix is rarely a limit-switch adjustment. Calder digs out the old footing, re-sets the post in new concrete, and often adds a sister post or steel collar for stiffness. This is structural work, not a tweak. Depending on access and post size, hinge post re-setting in Pecan Grove runs $380 – $700. Addressing the post before replacing an opener saves you from replacing that opener twice.
Weld and Rust Repair on Iron Gates
Pecan Grove’s humidity keeps rust active on bare steel, especially at weld points, hinge barrels, and the bottom rail where sprinkler overspray hits. We grind out the rust, weld the cracked joints, and re-prime and paint the repair area. Weld and rust repair on a typical single swing gate runs $180 – $400. Left alone, a rusted bottom rail eventually lets the whole gate sag into the drive.
Trusted Brands We Service in Pecan Grove
Calder Gate Repair technicians are factory-familiar with nine major gate opener brands, including Viking, DoorKing, Ghost Controls, and Elite; the same equipment on most Pecan Grove gates. We stock common parts for these brands locally, so a failed control board or limit switch doesn’t mean a week of waiting on a distributor. On a Ghost Controls residential opener, a control board replacement typically runs $220 – $380 including labor. On a DoorKing commercial operator, swapped capacitors and relays usually fall between $180 and $320. Whatever you have, call (903) 417-0793 and tell us the brand off your keypad or the side of the motor; we’ll tell you what we’re likely looking at before we even dispatch.
Common Gate Repair Problems We See in Pecan Grove Homes
- Seasonal post lean. Pecan Grove’s open-ditch drainage and expansive clay make gate posts shift with moisture. A post that reads plumb in August may lean out by October after a wet week, and the gate drags at the latch. We re-set or sister the post rather than just cranking the operator limits every few months.
- Safety sensors knocked out of alignment. A leaning post or stray mower pass nudges a photocell, and the gate stops reversing on obstruction. This fails a UL 325 entrapment check and needs correction, not a bypass.
- Storm-damaged slide tracks. After a good Pecan Grove downpour, slide gates skip out of mesh when debris washes into the track or the operator loses its limit settings. We clear the track, realign the rack, and reset the travel.
- Keypad and entry system failures. Lightning and power surges kill keypad boards and intercom cards. If your keypad went dead after a storm, check the breaker first, then call us for a board-level diagnosis.
Pricing for Gate Repair in Pecan Grove, TX
Most gate opener repairs in Pecan Grove run $180 – $340 before parts. Limit-switch resets, photocell realignment, and hinge adjustments land on the lower end. Control board replacements, rack and pinion work, and post re-setting run higher, typically $240 – $700 depending on the opener brand and the condition of the post footings. A full operator replacement on a residential swing gate usually falls between $950 and $1,800 installed, including the new arm, safety edges, and reversal testing. Commercial slide gate operators run $2,200 – $5,200 installed depending on size and duty cycle. Every quote is written and agreed before we start; the invoice matches it. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Pecan Grove
Calder Gate Repair handles gate repair across the greater Houston area from the Relay Home Co. Houston office. If you’re outside Pecan Grove but still need a gate working, we cover Pecan Grove plus Houston, San Antonio, Dallas, and Fort Worth with the same written pricing and 365-Day Done Right Promise.
Serving Pecan Grove, TX - Our Local Coverage Area
We’re based in the Pecan Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pecan Grove
Your swing gate sags seasonally because Pecan Grove’s expansive clay takes up water in wet months and shrinks in dry spells, which moves the hinge post footing. A post that reads plumb in a dry August can lean out of plumb after a wet October, dragging the gate at the latch. The real fix is re-setting or sistering the post, not adjusting operator limits every few months. Calder does this structural work regularly across Pecan Grove. Call (903) 417-0793 and we’ll tell you what your post footing actually needs.
No, and we won’t promise it. A proper gate installation in Pecan Grove means digging and pouring post footings sized for the local clay, running power, mounting safety edges, and testing reversal per UL 325 before we leave. That takes measured scheduling, not a same-day rush. What we do offer is a free measure and a written price, then a booked installation date that we actually keep. Call (903) 417-0793 to schedule the measure.
Usually not, but it is urgent. A gate that stops reversing on obstruction has a misaligned photocell, a failed safety edge, or a bad control input, and it fails the UL 325 entrapment check. We correct the sensor, replace the edge if needed, and retest reversal before we leave. On a Pecan Grove commercial slide gate, that’s typically a $180 – $320 job. Call (903) 417-0793 and describe what the gate is doing; a live person will talk it through with you.
Calder Gate Repair services nine major brands, including Viking, DoorKing, Ghost Controls, and Elite, which covers most residential and commercial openers in Pecan Grove. We stock common parts for these brands locally, so a failed control board doesn’t strand your community entry for a week. Tell us the brand off your keypad or motor housing and we’ll confirm parts availability before we dispatch.
Check the breaker for the gate circuit and look for a tripped GFI outlet near the opener. If both are good, the keypad board likely took a surge, which we can diagnose and replace. Keypad board replacement in Pecan Grove typically runs $120 – $220. Call (903) 417-0793 and we’ll walk through the checks with you on the phone.
Call Calder Gate Repair for Gate Repair in Pecan Grove
When your gate won’t open, sags at the latch, or stopped reversing when your kid walked through it, call (903) 417-0793. A live person answers, we schedule a real arrival time you can track, and you’ll get a written price before anything starts. Every repair carries the 365-Day Done Right Promise: if it fails within a year, Calder returns at no charge. Nico Alvarez and the Calder team handle gate repairs across Pecan Grove daily, and we’ll treat your gate like it’s the one keeping our own yard safe.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Pecan Grove since 2009.