Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lancaster, TX
Calder Gate Repair handles residential and light-commercial gate work across Lancaster, TX, from swing gates on acreage lots off Houston School Road to driveway openers in newer subdivisions near the high school. Most Lancaster calls come down to two problems: a gate that won’t open at all, or one that opens halfway and stalls. We diagnose those same day, quote a written price before any work starts, and back every repair with the 365-Day Done Right Promise. Call (903) 417-0793 and you’ll reach a live person, not a voicemail.
Why Lancaster Homes Are Different
Lancaster sits on the southern edge of Dallas County, and its gate work reflects that mix of older ranch-style homes on generous lots and newer builds packed closer together. The soil here is the quiet villain. Lancaster’s clay-heavy ground expands and contracts with rainfall, and over time that movement shifts gate posts, throws hinges out of alignment, and puts strain on the opener’s drive arm. We correct more post lean and hinge bind in Lancaster than almost any other single issue.
Weather matters too. Gates in Lancaster bake through July and August, which ages plastic gear housings, control boards, and capacitor-start motors faster than the manufacturer’s average. Then a February ice event stresses the same components in the opposite direction. Homes with long driveway runs between Lancaster city limits and I-35E also tend to have heavier ornamental steel gates, which ask more of every opener brand we service.
If you live in an HOA-governed neighborhood, gate work usually falls under your fence and gate maintenance responsibility, not the association’s. Some HOAs do regulate gate style and finish, so before a full replacement we recommend confirming what your covenants require.
Our Main Lancaster Services
Lancaster homeowners usually reach us through one of three doors: a gate that physically won’t move, an electric system that behaves erratically, or an opener that runs but doesn’t do its job. Each has its own Lancaster page below with full pricing and failure symptoms.
Gate Repair in Lancaster
The physical side of the job: sagging or dragging gates, bent hinges, stuck rollers, misaligned posts, broken welds on steel frames, or wood gates that have swollen in Lancaster humidity. We carry steel tubing, hinges, wheels, and weld equipment on the truck so most physical Gate Repair in Lancaster jobs wrap up in one visit. If a post has shifted in the clay, we reset it in concrete and re-true the gate before we hand it back to the opener.
Electric Gate Repair in Lancaster
This is the electrical half: no power to the gate, a tripped breaker that won’t reset, dead keypads, failed loop detectors, damaged photo eyes, or a control board that clicks but won’t run the motor. Lancaster’s summer heat is rough on boards and wiring run through conduit that sits in direct sun. Our Electric Gate Repair in Lancaster page covers the common failure points, what we test first, and what parts cost before labor.
Gate Opener Repair in Lancaster
When the gate itself swings or slides fine by hand but the opener grinds, hums, reverses, or does nothing, the issue lives in the motor, gearbox, limit switch, or receiver. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units every week. Full pricing for Gate Opener Repair in Lancaster, including what a new receiver or limit switch costs, is on that page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lancaster
We’re factory-familiar with nine opener brands, and in Lancaster the busiest four are Linear, Viking, Ghost Controls, and DoorKing. Common replacement parts for those brands ride on our trucks, which keeps most opener repairs to one visit. See our brands for the full list and what we stock.
Pricing for Gate Company in Lancaster, TX
| Service | Typical range in Lancaster |
|---|---|
| Service call + diagnosis (applied to repair) | $0 |
| Standard gate repair, no parts | $75 – $190 |
| Gate opener repair, no parts | $80 – $210 |
| Electric gate repair, no parts | $85 – $220 |
| Limit switch replacement | $120 – $230 |
| Control board replacement | $220 – $480 |
| Gear and drive assembly replacement | $210 – $400 |
| Gate opener installation (labor only, equipment supplied) | $300 – $650 |
| Full gate opener installation with new opener | $500 – $900 |
| Pull-to-open arm / actuator installation | $850 – $1,700 |
| Gate post replacement and reset | $300 – $850 |
In Lancaster, the biggest price movers are gate size and post condition. A 16-foot ornamental steel gate that’s heavier than the opener was rated for will push parts and labor toward the top of each range, and a post that’s leaning in clay needs resetting before any opener work makes sense. Every quote is written before we touch the gate, and the number on the invoice is the number you approved at the door. No surprise line items, ever.
Neighborhoods We Serve in Lancaster
We run calls across the whole city, from the neighborhoods around Lancaster High School north to the mixed residential and light-industrial pockets near the I-35E corridor. Typical response time in Lancaster is same day or next morning, depending on when you call.
- Millbrook
- Pleasant Run
- Fox Hollow
- The Meadows
- Pineview Estates
Service Area – Cities Near Lancaster
Our Lancaster crews also run calls in the towns that border the city on every side. That includes Hutchins, TX to the north, DeSoto, TX to the northwest, Wilmer, TX to the east, and Red Oak, TX to the south. If your gate sits anywhere in that ring, dispatch is coordinated from our Dallas-Fort Worth office and the same Lancaster-area team handles the work.
Serving Lancaster, TX - Our Local Coverage Area
We’re based in the Lancaster area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lancaster
Same day in most cases if you call before early afternoon. Urgent calls, like a gate stuck open with dogs or kids inside, go to the front of the schedule. A live person answers 24/7 at (903) 417-0793, so you’ll know your arrival window before you hang up.
Repairs and opener replacements on an existing gate typically don’t require a permit in Lancaster. New gate installations with new footings can trigger a city permit check, depending on the scope. We’ll tell you during the estimate whether your specific project needs one, and HOAs may have their own finish or style rules.
We cover all of Lancaster plus the surrounding cities, including Hutchins, DeSoto, Wilmer, and Red Oak. If you’re inside the city limits or just outside on the county side, we’ll route a truck to you. Call (903) 417-0793 and our dispatcher will confirm the soonest available slot for your address.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lancaster Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.