Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Jacksonville?
Most gate repairs in Jacksonville cost between $180 and $650, with the typical job landing around $320. Simple fixes like a misaligned roller or a dead battery in your keypad run closer to the low end, while control board replacements, arm operator rebuilds, and post repair after a storm often push past $500. We give you a written price before any work starts, so the number you hear at the door is the number on your invoice.
Calder Gate Repair handles gate repair, electric gate repair, and gate opener repair across Jacksonville, from Riverside and San Marco to Mandarin and the Beaches. Every job is backed by our 365-Day Done Right Promise, and a live person answers the phone 24/7 to book you a tracked arrival time. Call (903) 417-0793 for a free estimate.
Key Takeaways
- Typical Jacksonville gate repair: $180 – $650, most jobs near $320.
- Diagnostic visit is usually $75 – $125, and it’s credited toward the repair when you move forward.
- Coastal salt air and summer storm season drive up wear on operators and hinges here more than in inland Florida cities.
- Every Calder job includes a written price, a written guarantee, and a free second visit if the repair fails within 365 days.
- Free estimates: (903) 417-0793.
Gate Repair Cost Breakdown (2026)
Here’s what Jacksonville homeowners are actually paying this year. These are installed-parts-and-labor ranges for a standard residential driveway gate.
| Repair Type | Typical Cost Range |
|---|---|
| Diagnostic / service call | $75 – $125 |
| Roller, hinge, or track adjustment | $150 – $300 |
| Gate opener arm or chain repair | $220 – $480 |
| Control board replacement | $280 – $620 |
| Limit switch – the small sensor that tells the gate when to stop | $180 – $340 |
| Safety sensor / photo-eye replacement | $160 – $320 |
| Keypad or remote reprogramming | $95 – $180 |
| Slide gate motor / operator replacement | $850 – $1,900 |
| Gate post repair or reset after storm damage | $300 – $900 |
What pushes a job toward the top of a range? Parts availability for the specific opener brand, how far a technicians has to travel to your neighborhood, and whether the failure is mechanical (something bent or worn) or electronic (a board, sensor, or motor). A LiftMaster board swap is a different job than rebuilding a FAAC swing arm, and we price each one on its own. You can read more about our full range of electric gate repair services to see how we break the work down.
We’re factory-familiar with nine major opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters for cost because we don’t guess at diagnostics. If your Mighty Mule isn’t responding to a remote, we usually know within minutes whether it’s the battery, the receiver, or the control board – and that’s the difference between a $120 visit and a $500 guess.
What Affects Gate Repair Pricing in Jacksonville
- Gate type and weight. A light aluminum swing gate is quick to adjust. A solid wood or wrought-iron driveway gate needs heavier hardware and sometimes a second technician, which adds labor.
- Operator brand and parts availability. Common brands like LiftMaster and Linear have parts on hand. Older or less common openers can mean a special order and a longer wait.
- Coastal salt exposure. If you’re in Jacksonville Beach, Atlantic Beach, or Neptune Beach, salt air corrodes hinges, chains, and control boards faster than it does in Orange Park or Mandarin. Expect more frequent lubrication and hardware swaps near the water.
- Storm and hurricane season. From June through November, we see a spike in post-storm calls – bent posts, waterlogged boards, and gates that took a hit from debris. These repairs often cost more because the damage is structural, not just electrical.
- Whether it’s a repair or a replacement. If the operator is more than 12 – 15 years old and the board has already been replaced once, a new operator often makes more financial sense than another round of repairs.
- Access and site conditions. Tighter lots in neighborhoods like Avondale or Riverside can mean more maneuvering time, while longer driveways out in Mandarin or the Northside add a little travel.
How to Save on Gate Repair
A few habits keep gate repair costs down over the long run.
- Get the diagnostic credited. Ask up front whether the service call fee comes off the repair. Ours does.
- Fix small issues early. A $180 limit switch today can turn into a $600 motor replacement if the gate keeps running past its stop point.
- Lubricate moving parts seasonally. Twice a year on the hinges, rollers, and chain is cheap insurance, especially near the coast.
- Keep water out of the control box. A $15 gasket or a repositioned enclosure beats a $500 board any day.
- Bundle related repairs. If your sensors are also due, doing both in one visit saves a second trip charge.
We offer free estimates, so you can compare numbers before you commit. Call (903) 417-0793 and a live person will book you a real arrival window you can track – not a four-hour maybe. It’s part of what we call the Relay Standard: a live arrival time, before-and-after photos, and a digital invoice you pay from a link.
FAQs – Gate Repair Cost
How much does a gate repair cost in Jacksonville?
Most gate repairs in Jacksonville run $180 – $650, with the average job around $320. Simple adjustments sit near $150, and full operator replacements climb past $1,000. Call (903) 417-0793 for an exact quote – estimates are free.
Is it cheaper to repair or replace my gate opener?
Repair is almost always cheaper if the operator is under 12 years old and the fix is mechanical or electronic, typically $180 – $620. If it’s over 15 years old and you’ve already replaced the board once, replacement ($850 – $1,900) usually makes more sense. Call (903) 417-0793 and we’ll tell you honestly which one fits your gate.
How much does a gate opener repair cost?
Gate opener repair in Jacksonville typically costs $220 – $620 depending on the brand and whether it’s the arm, the motor, or the control board. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Call (903) 417-0793 for a written price before we start.
Can you come today?
Often, yes – same-day service is common for non-emergency calls in Jacksonville, and we answer the phone 24/7 when a gate is stuck open or won’t secure. A live person books the visit and gives you a tracked arrival time. Call (903) 417-0793.
What does your guarantee actually cover?
Every repair comes with our 365-Day Done Right Promise: if the repair fails within 365 days, we come back at no charge. That’s a free second visit, in writing, on every job. Call (903) 417-0793 to schedule.
What Happens When You Book With Calder
Here’s the process from first call to finished repair, so there are no surprises.
- Call (903) 417-0793. A live person answers, 24/7, and books you a real arrival window.
- Track your technician. You get a live arrival time and a background-checked, uniformed tech shows up when we said.
- Get a written price. We diagnose the gate and put the number in writing before any work starts.
- We do the repair. Parts and labor, done right the first time, with before-and-after photos.
- Pay from a link. A digital invoice lands in your phone. The number matches the written price, every time.
Calder Gate Repair is part of the Relay Home Co. family, founded in 2009, and each location is independently owned and operated. We specialize in gate repair, so this isn’t a side service for us – it’s all we do. You can see how the whole operation works on our home page.
If you’re weighing a fix against a new system, our guide on gate opener repair walks through when repair makes more sense than replacement. If your issue is a stuck gate during a storm, the gate repair page covers what to check before you call. And if you’re in a specific part of town, we have local pages for Riverside, San Marco, Mandarin, Jacksonville Beach, Orange Park, and Ponte Vedra.
Get Your Free Estimate
Gate repair in Jacksonville doesn’t have to be a mystery. Call (903) 417-0793 and we’ll give you a written price, a tracked arrival time, and a repair backed by the 365-Day Done Right Promise. Whether it’s a LiftMaster board, a FAAC arm, a Mighty Mule remote that quit, or a gate post that took a hit last storm, we’ll tell you what it costs before we turn a single bolt.
Pricing reflects the Jacksonville market as of 2026. Calder Gate Repair offers free estimates – call (903) 417-0793.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Jacksonville since 2009.
What Our Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.