Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Los Angeles?
Gate installation in Los Angeles typically runs $3,200 to $9,500 for a driveway gate with an automatic opener, and $1,400 to $3,800 for a pedestrian or side-yard gate. The final number hinges on three things: gate material, gate size, and whether the opener needs new electrical work run to the post. Most single-driveway installs we quote in LA land between $4,500 and $7,200 once permits and access control are factored in.
That’s the honest range. What you’ll actually pay depends on your property, your slope, and how close your power source sits to where the gate needs to live. We put every one of those numbers in writing before we touch a post.
Key Takeaways
- Driveway gate + opener installs in Los Angeles: $3,200 – $9,500.
- Pedestrian gates: $1,400 – $3,800.
- New electrical run to the gate post is the single biggest wildcard line item, often $600 – $2,400.
- City of Los Angeles permits and inspection add roughly $250 – $700.
- Every Calder Gate Repair job ships with a written price before work starts and our 365-Day Done Right Promise.
Gate Installation Cost Breakdown (2026)
Here’s where the money goes. These are real Los Angeles market ranges as of 2026, and they hold whether you’re in Sherman Oaks or San Pedro.
| Line Item | Typical LA Range |
|---|---|
| Gate fabrication and material (steel, aluminum, wood, wrought iron) | $1,600 – $5,200 |
| Posts, footings, and concrete work | $400 – $1,600 |
| Automatic gate opener (single swing or sliding) | $850 – $2,600 |
| Electrical run to gate post | $600 – $2,400 |
| Safety sensors, photo eyes, and reversing edge | $180 – $450 |
| Access control (keypad, remote, intercom, or app module) | $250 – $1,100 |
| City of LA permit and inspection fees | $250 – $700 |
| Labor and haul-away | $700 – $2,000 |
Add a second gate leaf, an uphill driveway that needs a low-profile track, or a hillside footing that requires extra concrete, and you’ll drift toward the top of that range fast. Cut scope by choosing a sliding gate over a double-swing, or by reusing an existing concrete pad, and you’ll pull the total down.
If you want a sense of how this compares to repairing what you already own, our Gate Installation in Los Angeles service page breaks down the difference between a fresh install and a rebuild. Nine times out of ten, a homeowner searching for install pricing is really deciding between new and repaired, so it’s worth reading before you commit.
What Affects Gate Installation Pricing in Los Angeles
- Gate material. A basic aluminum driveway gate sits near $1,600. Custom wrought iron in a Los Feliz or Hancock Park style can push $5,000+ for the gate alone. Wood gates split the difference but need refinishing every few years in our sun.
- Driveway slope. LA is a hillside city. A steep driveway in Silver Lake or Mount Washington often rules out a standard swing gate and forces a sliding gate with a ground track, which adds labor and fabrication.
- Distance from your electrical panel. If your panel is on the far side of the house from the gate line, trenching and conduit can run $2,000+. This is the line item that surprises people most.
- Hillside and retaining-wall conditions. Post footings in the Santa Monica Mountains or the Hollywood Hills routinely need deeper pours and sometimes engineering, which is why hillside quotes come in higher.
- Opener brand and duty cycle. A LiftMaster or FAAC unit built for daily use costs more up front than a Mighty Mule, but it holds up better to LA’s dust and heat. We work with nine major brands and quote the one that fits your gate’s weight and cycle count.
- Permits and HOA rules. The City of Los Angeles requires a permit for most automatic gate electrical work, and neighborhoods like Porter Ranch or Playa Vista come with HOA design review that can add time.
One more LA-specific factor: if your property sits in a Very High Fire Hazard Severity Zone, gate placement relative to driveway clearance and emergency access matters. We flag that during the estimate so you’re not caught off guard at inspection.
How to Save on Gate Installation
Nobody wants to overpay, and there’s real room to trim here without cutting corners on safety.
- Reuse the existing concrete pad if it’s sound. A solid footing you already own can save $400 – $1,600 in demo and pour.
- Choose sliding over double-swing when your driveway allows it. One gate leaf and one opener instead of two usually saves $700 – $1,500.
- Bundle the opener with the gate. Quoting both together beats sourcing them separately, and it keeps the warranty under one roof.
- Skip premium access control you won’t use. A keypad and two remotes cover most households. Intercom and app modules are nice, not required.
- Get the electrical scope nailed down first. Ask explicitly whether the run from your panel is included. That’s where budgets break.
- Schedule in the off-season. Late winter and early spring are slower for us, and we can often fit you in faster.
The best savings move is a free, written estimate with real numbers on it. Call (903) 417-0793 and we’ll walk your property, measure, and hand you a price before you commit to anything.
The Calder Approach to Gate Installation
We’re a gate repair specialist inside the Relay Home Co. family, which has been operating since 2009 with each location independently owned. That repair-first mindset shapes how we install: we build gates we know we can service, with openers we’re factory-familiar with, so a year from now you’re not chasing down a brand nobody local can fix.
That covers LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether you’re in Encino with a heavy iron driveway gate or in Eagle Rock with a light aluminum pedestrian gate, one of those nine is the right fit, and we’ll tell you which and why in plain language.
Every install includes our three standing guarantees: a written price before any work starts, a written guarantee on the job, and a free second visit if anything fails within the 365-Day Done Right Promise window. You’ll get a live, trackable arrival time instead of a four-hour window, before-and-after photos, and a digital invoice you pay from a link. And when you call, a live person answers, 24 hours a day, seven days a week. No voicemail, no chatbot.
To see how all our services fit together across the city, start at our home page, or read the full Gate Installation in Los Angeles guide for material comparisons and neighborhood examples.
FAQs – Gate Installation Cost
How much does gate installation cost in Los Angeles in 2026?
Most driveway gate installations in Los Angeles cost $3,200 to $9,500, with the typical job landing around $4,500 – $7,200 once permits and access control are included. Pedestrian gates run lower, roughly $1,400 to $3,800. Call (903) 417-0793 for an exact quote on your property.
Is it cheaper to repair my existing gate or install a new one?
Gate repairs usually run $180 to $1,200, so repair is cheaper in most cases, especially if your frame and posts are still solid. Once the frame is rusted through, the footing is cracked, or the opener is failing for the third time, a new install at $4,000+ often costs less over five years. Call (903) 417-0793 and we’ll tell you which makes sense for your gate.
Does gate installation in Los Angeles require a permit?
Yes, in most cases. The City of Los Angeles typically requires a permit for automatic gate electrical work, and permit and inspection fees usually add $250 to $700 to the project. Fire-hazard zones and HOA neighborhoods can add requirements on top of that. Call (903) 417-0793 and we’ll flag what applies to your address.
How long does gate installation take?
A standard residential driveway gate install takes one to three days once materials arrive, plus a day for electrical if a new run is needed. Custom fabrication and HOA design review can add one to three weeks to the front end. Call (903) 417-0793 for a scheduling window you can actually plan around.
Can you install an automatic opener on a gate I already have?
Yes, in many cases. Opener-only installation typically costs $850 to $2,600 for the unit plus installation, assuming your gate is structurally sound and can swing or slide freely. We check weight, travel, and footing before quoting. Call (903) 417-0793 and we’ll assess your existing gate first.
Questions about a specific property, slope, or brand? We’re happy to talk it through before you spend a dime.
Pricing reflects the Los Angeles market as of 2026. Calder Gate Repair offers free estimates – call (903) 417-0793.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Los Angeles since 2009.
What Our Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.