Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Converse, TX
When a gate stops opening in Converse, most homeowners call us after trying the usual fixes: fresh remote batteries, a breaker reset, maybe a few firm shoves. Calder Gate Repair handles the rest. We’re the gate repair specialist inside the Relay Home Co. family, and we send background-checked, uniformed technicians to homes across Converse – usually with a live arrival time you can track on your phone, not a four-hour window. If your gate is stuck, noisy, or sagging, call (903) 417-0793 and a real person answers, day or night.
Why Converse Homes Are Different
Converse sits on the northeast edge of San Antonio, where the soil is heavy clay that shifts through wet-dry cycles. That movement matters for gate work: posts settle out of plumb, gate frames twist slightly, and a gate that swung fine in March can drag by August. Many of the homes here were built in the 1990s and 2000s – subdivisions off FM 1516, Toepperwein Road, and Kitty Hawk Road – and a lot of those original gate openers are now hitting end-of-life: a LiftMaster or FAAC from that era is 15 to 25 years old. Add in Bexar County’s heat and seasonal storms, and you get a specific set of issues: corroded connections, brittle capacitor boards, and limit switches fouled by dust and grit. We plan for that on every Converse job, because we’ve seen how fast a borderline opener fails after a hard rain or a triple-digit stretch.
Homeowners associations are common in Converse neighborhoods, and many set rules about gate height, color, and even whether a swing gate can face the street. If your HOA needs a like-for-like opener swap rather than a full automation change, that’s a conversation worth having before any work starts. We’re happy to tell you what the existing hardware actually is so you can check it against your HOA’s requirements.
Our Main Converse Services
Most Converse homeowners reach us for one of two reasons: the gate won’t move at all, or it moves but won’t open or close on command. Each of these has a dedicated Converse page with full pricing, repair details, and what to expect on the day we arrive.
Gate Repair in Converse
A gate that drags, binds, or refuses to latch usually points to a structural problem: hinges worn down by heat and humidity, a post that settled out of plumb, or a frame twisted by the clay soil under the slab. In Converse, we also see a fair amount of storm damage – wind gusts along open stretches of FM 1516 can yank a gate hard enough to bend a bracket. Our Gate Repair in Converse page covers the common fixes, the price range, and why we write the number down before touching a bolt.
Electric Gate Repair in Converse
When the problem is electrical – a dead keypad, a breaker that trips the moment the opener runs, a photocell that doesn’t respond – you need a technician who knows the wiring, not just the hardware. Thunderstorms through Bexar County are a real culprit here: a nearby lightning strike can take out a control board even when the gate itself looks fine. Our Electric Gate Repair in Converse page explains what we test, what typical electrical repairs cost, and how fast we can get to you.
Gate Opener Repair in Converse
The opener is the motor and control board that does the pushing. In Converse, opener failures cluster around the summer months – heat is hard on capacitors, and a dusty opener arm grinds itself down faster than one that’s cleaned and lubricated. Whether it’s a LiftMaster that hums but won’t run, or a FAAC that opens but won’t close, the fix usually falls into a tight set of known issues. Our Gate Opener Repair in Converse page covers the brands, the failure signs, and the repair costs in plain numbers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Converse
We keep common boards, remotes, photo eyes, and limit switches for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing on the truck – stock moves fast, and having the part on hand instead of on order changes a same-week repair into a same-day one. Nico Alvarez and the team are trained on our brands, which covers nine major opener makers in total, including BFT and Ghost Controls.
Pricing for Gate Company in Converse, TX
The table below shows realistic ranges for the gate work we do most often around Converse. These are the numbers we quote over the phone, and the number on your invoice will match the number you approved before we started.
| Service | Typical range in Converse |
|---|---|
| Service call & diagnosis | $49 – $95 (waived with repair) |
| Gate opener repair | $195 – $540 before parts |
| Gate opener replacement | $850 – $1,800 installed |
| Hinge replacement | $120 – $350 per hinge |
| Gate wheel or roller replacement | $80 – $220 per wheel |
| Gate safety sensor / photo eye | $110 – $285 |
| Keypad replacement or programming | $90 – $240 |
| Control board replacement | $220 – $620 |
| Gate opener arm repair | $145 – $390 |
| Remotes / receiver replacement | $75 – $195 |
What pushes a Converse quote higher? Gates that have fallen badly out of alignment – where the post leans, not just the hinges – take more time, and so do openers mounted on brick columns that need drilling into masonry. Whatever the total, you get the number in writing before any work starts. If the repair fails within 365 days, Calder comes back at no charge under the 365-Day Done Right Promise.
Neighborhoods We Serve in Converse
Our trucks roll through Converse every day, and we know the layout well enough to route a technician without guesswork. We regularly serve these neighborhoods:
- Northampton
- Woodlake
- Paloma Park
- Converse Meadows
- Bridlewood Park
Response across Converse is typically same-day for opener repairs and most gate fixes, with the occasional next-morning slot on the busiest summer days.
Service Area – Cities Near Converse
If you’re just outside Converse, we likely cover you too. Our technicians serve Universal City, TX, Schertz, TX, and Cibolo, TX on the same schedule. We also maintain a page for San Antonio, FL for those searching that area.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Converse
Usually, yes. Opener repairs and gate fixes in Converse are same-day in most cases, and a live person answers your call 24/7 to confirm a real arrival time. Call (903) 417-0793 for today’s availability.
Most HOAs in Converse require approval for changes to the gate’s look or height, not for repairing the existing opener or hinges. If the repair keeps everything as-is, you’re generally fine. For opener swaps, we can tell you the model so you can check with your HOA.
We cover all of Converse plus Universal City, Schertz, Cibolo, and much of the surrounding Bexar County area. If you’re on the edge of town, call us – if we can’t reach you, we’ll say so plainly.
Opener replacements usually get scheduled within two to five business days, since we confirm the right opener for your gate’s weight, swing, and HOA requirements first. You’ll receive a written quote before any part is ordered. Call (903) 417-0793 for a free estimate.
Have a question we didn’t cover? Call Calder Gate Repair in Converse at (903) 417-0793 and you’ll reach a person who can answer it – on the spot, any hour, any day. Estimates are free, and every repair is backed by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Converse Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.