Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Fernando, CA
Calder Gate Repair is the gate company San Fernando homeowners call when a driveway gate stops cooperating. We fix gate openers, replace broken hinges, and troubleshoot electric gate systems across the city. Most repair jobs in San Fernando run $180 – $340 before parts, and we give you a written price before any work starts. Call (903) 417-0793 and a live person answers, day or night.
Why San Fernando Homes Are Different
San Fernando’s housing stock leans older, with many properties built between the 1940s and 1970s. That means gates here often sit on original steel frames, welded decades ago before modern opener hardware existed. We regularly see gates in San Fernando where the post has shifted half an inch out of plumb and the opener is fighting itself every cycle. The soil here does that. Clay-heavy ground expands and contracts through wet winters and hot, dry summers, and over the years a gate post that started level quietly moves. That single fact changes how we approach almost every repair in San Fernando, because a new opener bolted to a drifting post will fail again within months.
Summers routinely push past 95°F in the San Fernando Valley, and direct sun cooks gate opener circuit boards, limit switches, and battery backups. We carry spares for that reason. Older homes also tend to have narrower driveways and tighter setbacks, so we stock compact arm openers and slide-gate parts that fit where a big swing operator won’t. If you live on a street like Maclay Avenue or work near San Fernando Road, you’ve probably watched a neighbor’s gate creep slower than it should for weeks before it finally quit. That slow failure is almost always a dying capacitor or a misaligned limit switch, the small sensor that tells the gate when to stop opening or closing.
Our Main San Fernando Services
Two of the three services San Fernando homeowners call us about most are covered on their own pages below. Each page has San Fernando-specific pricing, common failure patterns, and what to expect on the day of the job.
Gate Repair in San Fernando
Driveway gates in San Fernando take a beating from heat, dust, and daily cycles. The most common repairs we handle are sagging gates that drag on the concrete, broken hinge welds on steel frames, bent track sections on slide gates, and strike plates that no longer line up. When a gate drags, the opener motor works harder every cycle and eventually burns out, so the cheaper fix is usually catching the mechanical problem early. We inspect the full gate path, not just the operator. Gate Repair in San Fernando has full detail and local pricing.
Electric Gate Repair in San Fernando
When a San Fernando homeowner says “the gate is dead,” it’s usually an electric problem: a tripped GFCI, a severed low-voltage wire, a burned transformer, or a keypad that stopped talking to the control board. Valley heat accelerates capacitor failure and kills backup batteries faster than coastal climates. We trace the full circuit, from breaker to motor, and we test every safety edge and photo eye before we call it done. No guessing, no parts cannon. Electric Gate Repair in San Fernando explains the full diagnostic process.
Gate Opener Repair in San Fernando
Gate openers fail in predictable ways: stripped gears, worn drive belts, dead remote receivers, and limit switches that lost their setting. In San Fernando we also see a lot of sun-baked plastic housing on older units, cracked keypads, and ants nesting inside control boards, which corrode terminals and short circuits. We’re factory-familiar with nine major brands, so we usually know the failure mode before we open the unit. Same-day service is available for most opener repairs. Gate Opener Repair in San Fernando has brand-specific detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Fernando
We service FAAC, BFT, Linear, and Viking gate openers in San Fernando, plus five other major brands. Common parts for these units are stocked in our service vehicles, so we don’t have to drive back to a warehouse mid-job. Most opener repairs are completed in one visit. See our brands for the full list and what we keep on hand.
Pricing for Gate Company in San Fernando, CA
| Service | Typical range in San Fernando |
|---|---|
| Gate opener repair (most common jobs) | $180 – $340 before parts |
| Electric gate repair (diagnostic + electrical fix) | $180 – $340 before parts |
| Limit switch replacement | $120 – $260 |
| Remote or keypad programming | $85 – $160 |
| Track realignment (slide gates) | $150 – $300 |
| Hinge replacement (steel swing gate) | $140 – $280 |
| Gate opener motor replacement | $350 – $600 |
| Control board replacement | $250 – $450 |
| Safety edge or photo eye replacement | $110 – $220 |
Two things push San Fernando prices toward the higher end of these ranges: post movement from clay soil expansion, and heat-damaged components that create secondary failures, like a board that was overworked by a dying motor. You’ll still know the total before we start, because the price is written, agreed to, and unchanged at the end, every time. The number on the invoice is the number from the door.
Neighborhoods We Serve in San Fernando
We cover all of San Fernando, from the older blocks near the mission district to the residential streets off Glenoaks and the neighborhoods east of the 5 freeway.
- Downtown San Fernando
- San Fernando Hills
- Mission District
- North San Fernando
- Area along San Fernando Road
Most San Fernando calls get a technician dispatched the same day, with a live, trackable arrival time sent to your phone so you’re not waiting on a four-hour window.
Service Area – Cities Near San Fernando
Our crews serve San Fernando locally, and we also cover nearby cities in the San Fernando Valley and beyond. If you’re on the edge of our service area or just over the city line, we likely still cover your street. We serve Burbank, CA, Santa Clarita, CA, Glendale, CA, and Stevenson Ranch, CA. Scheduling is coordinated from the Relay Home Co. Los Angeles office, but the technician at your gate is a San Fernando local crew member.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Fernando
Most San Fernando calls are same-day. We dispatch a uniformed technician with a live arrival time you can track from your phone, not a vague window. If your gate is stuck open or stuck closed, call (903) 417-0793 and we’ll give you a real ETA in minutes.
Most gate repairs don’t need a permit, including opener replacement, hinge work, and board swaps. New gate installations or major electrical upgrades can trigger permit requirements through the city of San Fernando. We’ll tell you up front if your job needs one, and we handle the details. Call (903) 417-0793 for a straight answer on your specific project.
We cover all of San Fernando, including the mission district, the hills, and the neighborhoods along San Fernando Road. We also serve nearby cities like Burbank, Glendale, Santa Clarita, and Stevenson Ranch. If you’re not sure whether your address is in range, call (903) 417-0793 and we’ll confirm in seconds.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Fernando Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.