Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Francisco, CA
San Francisco gate work is different because the city is different: dense rows of Victorian and Edwardian homes, driveways carved into hillsides, and salt air that works on metal year-round. Most gate failures we see here come down to three things the city does better than anywhere: fog-driven corrosion, steep terrain that strains motors and hinges, and tight property lines that make every inch of gate travel count. Calder Gate Repair covers the full range of gate work across San Francisco, from one-off hinge replacements to complete electric systems. Call (903) 417-0793 and a live person answers, any hour.
Why San Francisco Homes Are Different
A gate in the Outer Sunset faces a different life than one in Noe Valley. The Sunset and Richmond sit in the fog belt, where salt-laden moisture settles on metal components for hours every morning. We regularly replace rust-seized hinges and corroded limit switches in those neighborhoods that still look fine from the street. On the east side of the city, from Bernal Heights to Potrero Hill, the hills themselves are the problem: a gate on a 20-degree slope cycles its motor against gravity, burns out capacitors faster, and needs opener adjustments a flat-land gate never does.
Housing stock pushes the timeline, too. Many San Francisco homes have custom gates fitted to unusual openings, whether a narrow Marina District walkway or a wide Victorian carriage entrance in Pacific Heights. When a component fails on a custom gate, it often needs a repair rather than a swap, because there is no standard replacement that fits the frame. Add HOA rules in some condo developments around Mission Bay and SoMa, where gate hardware changes require design review, and scheduling becomes part of the job. We quote the repair itself; you handle the HOA form, and we’ll tell you exactly what it will say.
Our Main San Francisco Services
These are the two call types that dominate our San Francisco schedule, plus the opener work that keeps both of them moving. Each has its own page with full pricing and detail, linked below.
Gate Repair in San Francisco
Physical gate failures, from drooping hinges to rusted frames, are common here because salt air works on metal all year. In fog-zone neighborhoods like the Sunset and Richmond, we see steel gates losing paint and developing corrosion within a few years of installation. The fix usually involves hinge realignment, weld repairs, or component replacement, and on San Francisco’s irregular lots it often means working with unusual gate dimensions rather than swapping in a stock panel. We quote a written price before work starts, and the invoice never surprises you. Full details and cost breakdowns are on our Gate Repair in San Francisco page.
Electric Gate Repair in San Francisco
Electric gates add a power component to every San Francisco weather and terrain issue. Motors on hillside driveways work harder, limit switches corrode in the fog, and wiring runs in old walls can be their own project. We carry parts for the common opener brands and diagnose on-site before quoting, so you know whether it’s a $60 sensor or a full motor replacement. Every repair goes in writing first, with the 365-Day Done Right Promise behind it. Visit the Electric Gate Repair in San Francisco page for detailed pricing and example jobs.
Gate Opener Repair in San Francisco
Gate openers fail in predictable ways here: control boards corrode in damp garages near the ocean, gears strip when a gate is forced against the wind, and remote receivers get confused by the city’s dense signal environment. We diagnose the opener itself before recommending a repair or replacement, and we’re factory-familiar with the brands most San Francisco homes have installed. You’ll get a written price before any work, and if the repair fails within the year, we return at no charge. See the Gate Opener Repair in San Francisco page for brand-by-brand notes and costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Francisco
We repair FAAC, BFT, Linear, and Viking openers, among others, and keep common components for those brands stocked in our Bay Area parts inventory. Most opener repairs in San Francisco finish same-visit once the fault is identified. For the full brand list, see our brands page.
Pricing for Gate Company in San Francisco, CA
| Service | Typical range in San Francisco |
|---|---|
| Service call fee | $75 – $125, waived with repair |
| Hinge replacement | $90 – $260 per hinge |
| Gate realignment | $180 – $375 |
| Weld repair (crack, break) | $140 – $340 per section |
| Gate opener repair | $180 – $500 before parts |
| Limit switch replacement | $110 – $230 |
| Control board repair | $190 – $420 |
| Remote/keypad programming | $80 – $165 |
| Gate opener installation | $650 – $1,500 including labor |
Two things push San Francisco prices toward the top of those ranges: access and materials. A gate in a tight Marina walkway or on a steep Outer Sunset slope takes longer to work on than a flat suburban gate, and salt-resistant hardware costs more than standard parts. Whatever the number, it’s quoted in writing before we touch the gate: the price on the invoice is the price you approved at the door.
Neighborhoods We Serve in San Francisco
We dispatch gate technicians to every San Francisco neighborhood daily. Response time varies less by distance than by traffic and terrain: a repair in the Outer Richmond or Visitacion Valley may take a little longer to reach, but we give you a live, trackable arrival window when you book, not a four-hour guess. We regularly work in:
- Outer Sunset
- Noe Valley
- Bernal Heights
- Pacific Heights
- Mission Bay
Service Area – Cities Near San Francisco
We also serve the neighboring communities where San Francisco homeowners have family or investment properties. If your gate is in Daly City, Brisbane, Sausalito, or South San Francisco, the same written-price guarantee and 365-Day Done Right Promise applies.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Francisco
In most San Francisco neighborhoods, we can have a technician on-site the same day for urgent failures. You’ll get a live arrival time you can track when you book, not a fuzzy window. Call (903) 417-0793 and a person answers 24/7 to schedule or troubleshoot.
Routine repairs, like hinge replacement or opener fixes, generally don’t require a city permit. New automatic gate installations can trigger permit requirements depending on the location and driveway layout. We’ll tell you during the estimate whether your job involves permit review and what it means for the timeline.
Yes. If your HOA or building association requires design review before gate hardware changes, we’ll provide the full specification of what we plan to install so you can submit it. We quote the repair, you file the form, and we schedule around the approval.
Need San Francisco gate work quoted? Call (903) 417-0793 for a free estimate and a written price before anything starts. A live person answers, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Francisco Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.