Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Seattle, WA
Calder Gate Repair is Seattle’s gate specialist, and we handle the repair and opener work that this city’s older lots, steep driveways, and wet winters constantly create. Most Seattle gate jobs come down to one of three problems: a gate that won’t open, a gate that won’t close, or an opener that runs but doesn’t move the gate. We give you a written price before any work starts, and every repair carries our 365-Day Done Right Promise. Call (903) 417-0793 and a live person answers, day or night.
Why Seattle Homes Are Different
Seattle’s housing stock runs from 1920s Craftsman homes in Wallingford and Ballard to hillside properties in Queen Anne and West Seattle where a driveway gate is holding back a serious slope. That terrain matters: a gate installed on a grade bears more weight on its hinges and opener than a flat-lot gate ever will. When an opener fails on a steep Seattle driveway, it’s often because the motor has been fighting gravity for years.
The climate is the second factor. Eight months of rain means rust at the hinge plates, moisture inside the opener housing, and limit switches, the small sensors that tell the gate when to stop, that corrode faster here than anywhere inland. We open more Seattle gate openers with water damage than we do with worn-out gears. Older neighborhoods also have narrow driveway aprons and tight setback rules, so gate posts get tucked close to property lines. That affects what can be installed and how repairs are done.
Our Main Seattle Services
These are the three services Seattle homeowners call us for most. Each has its own detailed page with local pricing and the specific fixes we handle in the city.
Gate Repair in Seattle
A gate that drags on the driveway, sags at the latch, or won’t stay closed is usually a mechanical problem: hinges, wheels, or the frame itself. Seattle’s wet winters accelerate all of it. Gate Repair in Seattle covers sagging and misaligned gates, broken hinge replacement, wheel and roller work, and frame repairs that account for the city’s hilly lots and older posts.
Electric Gate Repair in Seattle
Electric gates add a control board, safety sensors, and power wiring to the mechanical side. In Seattle, we see plenty of boards that have been soaked by driving rain or chewed through by rodents that move into warm control boxes in the fall. Electric Gate Repair in Seattle covers control board diagnostics, sensor and safety edge problems, and power issues on gates that have stopped responding to their keypads or remotes.
Gate Opener Repair in Seattle
When the motor runs but the gate barely moves, or the opener makes a grinding sound and then stops, the problem is usually the opener itself. On Seattle’s hillside lots, openers work harder than they would on flat ground, and we routinely replace stripped gears and burned-out capacitors. Gate Opener Repair in Seattle covers opener diagnostics and repair on the brands most common in the city.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Seattle
Our Seattle techs are factory-trained on the openers we see most in the area, and we keep common parts for LiftMaster, FAAC, BFT, Linear, and Viking on the truck so most repairs finish in one visit. For the full list of what we work on, see our brands.
Pricing for Gate Company in Seattle, WA
These are the price ranges Seattle homeowners can expect for common repairs, before any parts are added. We quote the total, parts included, in writing before we turn a single bolt.
| Service | Typical range in Seattle |
|---|---|
| Service call and diagnosis | $85 – $125 |
| Gate opener repair | $220 – $450 before parts |
| Electric gate repair | $175 – $400 |
| Hinge replacement | $120 – $300 |
| Gate wheel or roller replacement | $110 – $250 |
| Control board replacement | $250 – $600 |
| Safety sensor replacement or realignment | $110 – $220 |
| Limit switch replacement | $90 – $180 |
| Remote or keypad replacement | $80 – $175 |
In Seattle, expect the higher end of these ranges on hillside lots and older gates where rust has set in and hardware needs extra extraction work. Every quote is written down before we start, and the invoice at the end matches the number you approved up front. If the repair fails within 365 days, we come back at no charge, it’s the 365-Day Done Right Promise, stated on every job.
Neighborhoods We Serve in Seattle
We dispatch across the entire city, from Ballard to Seward Park to Rainier Beach. Our techs are usually able to reach most Seattle neighborhoods within a couple of hours for emergency gate failures, and we schedule standard repairs in half-day windows with a live, trackable arrival time.
- Ballard
- Queen Anne
- West Seattle
- Capitol Hill
- Magnolia
Service Area – Cities Near Seattle
Besides Seattle proper, our crews handle gate jobs on the Eastside and across the water. If you’re in Bellevue, WA, Mercer Island, WA, Kirkland, WA, or Bainbridge Island, WA, give our Seattle office a call and we’ll get you on the schedule.
Serving Seattle, WA - Our Local Coverage Area
We’re based in the Seattle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Seattle
For a gate stuck open or a driveway blocked by a failed opener, we aim to get a Seattle-based tech to you within a couple of hours, depending on your neighborhood and the time of day. Call (903) 417-0793 and a live person will give you a real arrival time you can track.
Most repairs, hinge replacements, opener swaps, and safety sensor work do not require a permit in Seattle. If the job involves a full new gate installation or moving setback lines, the city may have additional requirements, and we’ll tell you before any work is scheduled.
Yes. We regularly work in gated communities in and around Seattle, including complexes with strict HOA rules. We coordinate with property managers, carry the insurance documentation most HOAs require, and bring a written scope and price to every job.
Contact Calder Gate Repair in Seattle
If your gate won’t open, won’t close, or is making a sound it never made before, call (903) 417-0793 for a free estimate. A live person in Seattle answers 24/7, and we’ll give you a written price before anything gets touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Seattle Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.