Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Rendon, TX
Gate repair in Rendon comes with a set of conditions you don’t see in most of the metroplex: acreage lots, long driveway runs, older welded steel gates, and summer heat that cooks opener circuit boards inside the housing. Calder Gate Repair handles all of it, from a broken hinge on a ranch entrance to a full opener replacement on a subdivision iron gate. We give you a written price before any work starts, and a live person answers when you call (903) 417-0793.
Why Rendon Homes Are Different
Rendon sits in the unincorporated pocket between Mansfield and Fort Worth, which means most properties run on well water, septic, and private gates rather than city-managed infrastructure. The lots off Rendon Road and Teague Road trend larger, often one to five acres, and that changes the gate work we do. Longer driveways mean heavier gates, longer wire runs from the house to the opener, and more exposure to wind load. A gate that sags six inches on a quarter-acre lot in Fort Worth gets noticed immediately; the same sag on a three-acre Rendon property might go ignored for a year, by which point the hinge posts have started to lean and the opener motor is fighting the weight. We see that pattern constantly.
The soil here also plays a role. Rendon sits on the Eastern Cross Timbers, and the clay-heavy ground expands and contracts through wet and dry seasons. Gate posts set in that soil shift over time, which throws off the alignment between the gate leaf and the opener arm. Our technicians account for that when re-hanging a gate or setting a new post in Rendon, because a post set level in March can be out of plumb by August if the footing wasn’t deep enough.
Most of the homes along the FM 1187 corridor and the newer pockets off Rendon Road were built from the 1990s through the 2010s, and the original openers in those gates are now fifteen to twenty-five years old. Board failures, dead capacitors, and stripped drive gears are the most common calls we get. Because Rendon is unincorporated, there’s no municipal permit office for gate work, though a handful of the newer developments with deed restrictions may require an architectural review for a visible gate or opener replacement. We’ll flag that before we start if it applies to your street.
Our Main Rendon Services
Most Rendon homeowners call us first for a gate that won’t open at all, followed by a motor that hums but won’t move the gate. Each of these has its own dedicated Rendon page below, with local pricing and the brands we cover.
Gate Repair in Rendon
A steel tube gate on a Rendon acreage property takes a beating from wind, livestock, and the occasional delivery truck that clips the corner post. We re-weld broken pickets, cut and re-hang sagging gate leaves, replace bent hinge posts, and square up frames that have racked out of shape. The soil movement here means we set hinge posts deeper than standard, which keeps a repaired gate from re-sagging within the first year. See the full scope and local pricing on the Gate Repair in Rendon page.

Electric Gate Repair in Rendon
Electric gates here run on buried wire or solar, depending on how far the gate sits from the house. The long runs common on Rendon lots mean we check voltage drop at the opener before replacing any component, because a motor running on low voltage burns out the control board. We handle photo-eye failures, limit switch replacements, keypad and intercom issues, and safety edge repairs. Pricing and response details are on the Electric Gate Repair in Rendon page.

Gate Opener Repair in Rendon
When the opener hums but the gate doesn’t move, or the gate opens halfway and reverses, the problem is usually in the drive mechanism or the limit settings. We repair and replace openers across most major brands, often same-day if the part is on the truck. Texas heat is hard on these units, especially ones mounted in full afternoon sun. Get the full breakdown on the Gate Opener Repair in Rendon page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Rendon
We’re factory-familiar with the brands Rendon homeowners actually own, including Viking, Ghost Controls, DoorKing, and Elite. Our trucks carry common control boards, remote transmitters, and safety edge replacements for those lines, so a lot of Rendon opener jobs are done in one visit. See our brands for the full list.
Pricing for Gate Company in Rendon, TX
| Service | Typical range in Rendon |
|---|---|
| Gate opener diagnostic and repair | $180 – $340 before parts |
| Gate opener replacement | $650 – $1,400 installed |
| Control board replacement | $220 – $510 installed |
| Gate hinge replacement (single gate) | $120 – $280 per hinge set |
| Hinge post reset or replacement | $300 – $650 |
| Gate wheel or roller replacement | $80 – $190 per wheel |
| Safety edge or photo-eye replacement | $140 – $330 installed |
| Remote or keypad programming | $90 – $210 |
| Gate leaf re-align and re-hang | $250 – $600 |
What pushes a Rendon gate repair to the top of that range is usually the distance from the street. A long driveway means more time spent running wire and more labor getting tools to the gate, and we price that honestly. The figure we quote before starting is the figure on your invoice, every time.
Neighborhoods We Serve in Rendon
We cover the whole Rendon ZIP, from the acreage off FM 1187 to the newer streets behind Teague Road. Our dispatch hub is in the Dallas-Fort Worth office, and crews serving Rendon are typically on-site within 24 to 48 hours for scheduled work, with same-day options for opener emergencies.
- Rendon Road corridor
- Teague Road and surrounding streets
- FM 1187 frontage properties
- Ranches and acreage lots south of Mansfield
Service Area – Cities Near Rendon
While this page covers gate work in Rendon, our technicians also serve the surrounding metro area. If your property sits outside the immediate Rendon ZIP, you can find local details on our Fort Worth, TX page, Dallas, TX page, Houston, TX page, or San Antonio, FL page.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rendon
For a gate stuck open or closed, we can usually have a technician at your Rendon property the same day. Scheduled repairs and replacements are typically booked within 24 to 48 hours. Call (903) 417-0793 and a live person will give you a real arrival window, not a four-hour guess.
Rendon is unincorporated, so there’s no city permit requirement for gate or opener repair. A few HOA-governed subdivisions may ask for approval before a visible replacement, and we’ll tell you if your street falls into that category.
Solar-powered openers on Rendon acreage lots are common where the gate sits too far from the house for buried wire. We diagnose the full solar chain: panel output, battery health, charge controller, and the opener itself, and we carry replacement batteries on the truck. Call (903) 417-0793 for an exact quote; estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rendon Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.





Before
After
Before
After
Before
After