Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Poulsbo, WA
Calder Gate Repair is the gate company Poulsbo homeowners call when a gate stops opening, starts creeping closed on its own, or makes a sound like a bag of rocks every time it moves. We work on gate repair, electric gate repair, and gate opener repair across Poulsbo, from the waterfront places along Liberty Bay up to the newer developments off Finn Hill Road. Most repairs run $180 to $450 before parts, and we quote that number in writing before anything gets touched. Call (903) 417-0793 and a live person answers, day or night.
Why Poulsbo Homes Are Different
Poulsbo isn’t just wet, it’s persistently wet. The marine air off Liberty Bay keeps hinges, brackets, and opener housings damp for months at a time, and we see the result on nearly every service call: corroded limit switches, rusted hinge plates, and opener arms that bind because the metal has swelled. Homes in older neighborhoods like the streets near downtown Poulsbo and along Hostmark Street tend to have driveway gates set on posts that have shifted over decades of soaked, clay-heavy soil. When a post leans even half an inch, the gate’s travel arc changes and the opener has to fight it every cycle. That fight is what burns out motors and strips gears faster than anything else.
Newer Poulsbo construction, particularly the subdivisions up around Olhava and the College Marketplace area, has its own pattern: gates installed on fresh fill that settles within the first two or three years. A gate that worked fine in year one starts dragging in year three, not because the opener failed but because the ground shifted underneath it. We adjust for that, shim the hinges, and reset the travel limits so the opener isn’t working against the terrain. Then there are the deer. Poulsbo sits in the middle of Kitsap County’s deer country, and driveway gates are as much about keeping deer out of landscaping as they are about privacy. That means more pedestrian-release hardware, more keypad entries, and more attention to how the gate interacts with the fence line, because deer will absolutely test a gap.
Our Main Poulsbo Services
Most Poulsbo calls to Calder Gate Repair fall into one of three buckets: a gate that won’t open or close, an electric gate system that’s losing power or not responding, or an opener that’s making noise and doing nothing. Each has its own page here, because the job, the parts, and the price are different.
Gate Repair in Poulsbo
A gate that drags on the driveway or hangs crooked is usually a hinge, bracket, or post problem before it’s a motor problem. In Poulsbo, rust is the usual culprit, especially on gates facing west toward the water. We straighten, shim, replace, and re-hang so the gate moves under its own weight with one hand. Then we verify the opener isn’t being asked to compensate for a mechanical fault, because that’s what shortens its life. Full details are on the Gate Repair in Poulsbo page.
Electric Gate Repair in Poulsbo
Electric gate systems in Poulsbo fail in predictable ways, and moisture is behind most of them. We trace voltage through the control board, test photo eyes, check the loop detectors under the driveway, and find the break, the short, or the corroded terminal that’s causing the fault. Poulsbo’s damp air means we pay extra attention to connections that look fine from the outside but are green inside the wire nut. Details on what we check and typical repair times are on the Electric Gate Repair in Poulsbo page.
Gate Opener Repair in Poulsbo
When the opener makes noise but the gate barely moves, the problem is usually a stripped gear, a failed capacitor, or a limit switch, the small sensor that tells the gate when to stop. We work with Linear, Viking, Ghost Controls, and DoorKing openers more than any others in Poulsbo, and we carry the common gear kits and control boards so we’re not waiting on a parts shipment for a week. See the Gate Opener Repair in Poulsbo page for brand-specific notes and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Poulsbo
We service the openers Poulsbo homeowners actually have. That means a lot of Linear swing-arm units, Viking gate operators on the heavier steel gates, Ghost Controls on newer aluminum installs, and DoorKing on properties with intercom and keypad entry. We keep common parts for those brands on our local service vehicles, so a typical opener repair doesn’t wait on shipping. See our brands for the full list. Our technicians are factory-familiar with nine major opener lines, and we don’t guess at wiring diagrams or part numbers.
Pricing for Gate Company in Poulsbo, WA
These are the ranges Poulsbo homeowners can expect before parts, and the number you get quoted is the number you pay. We put prices in writing before any work starts, every time.
| Service | Typical range in Poulsbo |
|---|---|
| Gate wouldn’t open, wouldn’t close | $180 – $340 |
| Gate off track, leaning, or sagging | $200 – $450 |
| Gate post leaning or pulling out | $275 – $525 |
| Gate hinge or bracket replacement | $180 – $320 |
| Gate opener gear, chain, or belt replacement | $225 – $420 |
| Gate opener control board repair | $240 – $550 |
| Remote, keypad, or receiver troubleshooting | $85 – $200 |
| Gate opener no power, not responding | $150 – $300 |
| High-traffic or oversized gate opener | $400 – $800 |
What pushes a Poulsbo job toward the top of those ranges is usually access and condition. A rust-welded hinge on a 20-year-old gate near the waterfront takes longer to free than a clean bolt on a newer gate in Olhava. Emergency after-hours work carries a higher minimum, and we’re direct about that before we dispatch. What never changes: the written quote you approve before the first tool comes out is the price on your invoice.
Neighborhoods We Serve in Poulsbo
We cover the whole Poulsbo area, from downtown and the waterfront up through the newer neighborhoods on the ridge. Most calls get a same-day or next-day visit, and you’ll have a trackable arrival time before our technician rolls.
- Downtown Poulsbo and the Liberty Bay waterfront
- Olhava and College Marketplace
- Finn Hill and the neighborhoods off Finn Hill Road
- Hostmark Street and the west side
- Viking Avenue corridor
Service Area – Cities Near Poulsbo
In addition to Poulsbo, Calder Gate Repair runs service calls throughout north Kitsap County and across the water. If you’re in Silverdale, WA, Kingston, WA, Bainbridge Island, WA, or Tracyton, WA, we’ve got a truck headed that way regularly. Dispatch and scheduling run through our Seattle office, but crews serve Poulsbo locally and know the roads, the ferries, and the neighborhoods.
Serving Poulsbo, WA - Our Local Coverage Area
We’re based in the Poulsbo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Poulsbo
Most Poulsbo service calls are scheduled same-day or next-day. Emergency gate failures, like a gate stuck open on a property with dogs or kids, get priority routing from our Seattle dispatch with a live arrival time you can track. Call (903) 417-0793 and a person answers.
Replacing an opener, control board, hinge, or limit switch on an existing gate doesn’t require a Poulsbo permit. Building a new gate or moving a driveway entrance can trigger setback or HOA requirements, and we’ll flag that before quoting. The written estimate covers what we’re doing, and nothing starts until you approve it.
We cover the full Poulsbo area, from Liberty Bay to Finn Hill and the outlying roads off Bond Road and Viking Avenue. If you’re not sure whether you’re in range, call (903) 417-0793, give us your cross street, and we’ll give you a straight answer and a real arrival window.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Poulsbo Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.