Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clute, TX
Gate repair in Clute comes down to three things: coastal humidity, shifting soil, and gates that get used every single day. Calder Gate Repair handles all of it, from a sagging driveway gate on Brazoswood Drive to an opener that quit after a Gulf storm rolled through. Our techs work on Viking, Ghost Controls, DoorKing, and Elite openers, and every job starts with a written price before we turn a single bolt. If your gate won’t open or won’t stay closed, call (903) 417-0793 and we’ll have someone out fast.
Why Clute Homes Are Different
Clute sits just a few miles from the Gulf, and that changes everything about how gates fail here. Salt air works on hinges, brackets, and circuit boards year-round. We regularly open control boxes in Clute and find corroded terminals that would still look new 40 miles inland. The soil shifts too. Clay-heavy ground expands after heavy rain and contracts during dry spells, which means gate posts lean, latch bars miss their strikes, and openers have to work harder than they were designed to.
Most Clute homes were built between the 1950s and 1980s, and a lot of those original gates are still standing. The steel is usually solid, but the hardware around it is tired. We see worn limit switches, the small sensors that tell the gate when to stop, more than anything else. Neighborhoods like Plantation Park and River’s Edge have their own rhythm too, with plenty of double-wide driveway gates that get cycled half a dozen times a day. That daily use, plus the humidity, is why a gate opener that works fine for years in drier towns might need attention every few seasons here.
Our Main Clute Services
Most calls we take in Clute fall into three buckets: a gate that won’t move at all, a gate that moves but won’t close properly, or an opener that’s making noise and doing nothing. Here’s what each one looks like.
Gate Repair in Clute
A gate that drags on the ground or won’t latch is usually a hinge, wheel, or post problem. In Clute, we often find the post has shifted in the clay soil and the gate is hanging half an inch low, which throws off the whole geometry. We straighten, reinforce, and re-set so the gate swings or slides the way it should. If you’ve got a driveway gate that’s started scraping or a latch bar that won’t catch, that’s a Gate Repair in Clute job. We get most of these done in one visit.
Electric Gate Repair in Clute
Electric gates have power, a motor, and a control board, and any one of those can fail. Salt air is rough on exposed wiring and board connections, so we inspect the full circuit when we diagnose. A gate that opens but won’t close, or trips its breaker every time it runs, usually points to a motor drawing too much current or a short in the cable. Our Electric Gate Repair in Clute page covers the details, including what a typical diagnosis looks like and how we quote the work before starting.
Gate Opener Repair in Clute
If the opener hums but the gate doesn’t move, the problem is usually a gear, capacitor, or control board. In Clute, we also see a lot of ants getting into control boxes, they love the warmth, and shorting out connections. We carry parts for Gate Openers from all the major brands and can often swap a failed board the same trip. See Gate Opener Repair in Clute for what we stock and how we handle the common failures.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clute
We’re factory-familiar with nine gate opener brands, and in Clute that usually means Viking, Ghost Controls, DoorKing, and Elite on the residential side. We keep common boards, remotes, and hardware on the truck, so most repairs are done same visit rather than after a parts order. Check our brands page if you’re curious whether your specific model is one we carry parts for.
Pricing for Gate Company in Clute, TX
| Service | Typical range in Clute |
|---|---|
| Gate opener repair (labor only) | $180 – $340 before parts |
| LiftMaster/Chamberlain gear replacement | $225 – $395 |
| Control board replacement | $210 – $430 plus the board |
| Remote/programming | $75 – $150 |
| Photo eye sensor alignment or replacement | $90 – $185 |
| Hinge and bracket repair | $140 – $320 |
| Gate post reset and reinforcement | $275 – $550 |
| Full gate opener install (residential) | $800 – $2,200 |
What pushes a Clute price higher: a post that’s shifted badly and needs new concrete, a gate that’s over 16 feet long, or corrosion that’s eaten into the mounting brackets. You’ll always get the price in writing before work starts, and if the repair fails within 365 days, we come back free under the 365-Day Done Right Promise.
Neighborhoods We Serve in Clute
We run calls all over Clute, from Plantation Park to River’s Edge and the streets off Brazoswood Drive down toward Richwood. Same-day visits are usually doable if you call before midday, and we’ll give you a live, trackable arrival time so you’re not stuck waiting around.
- Plantation Park
- River’s Edge
- Brazoswood Drive area
- Main Street corridor
- Shy Crest
Service Area – Cities Near Clute
Beyond Clute, we take gate repair calls across southern Brazoria County. That includes Lake Jackson, TX, Freeport, TX, Angleton, TX, and Alvin, TX. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, with local crews covering the Clute area every day.
Serving Clute, TX - Our Local Coverage Area
We’re based in the Clute area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clute
Most Clute calls get same-day service if you reach us before midday. We give you a live, trackable arrival time when you book, not a four-hour window. A gate left open overnight is a security risk, so we prioritize those calls.
If your property is in an HOA, like parts of Plantation Park, check your covenants before we change the gate’s appearance or install a new opener. A repair that keeps the existing look usually doesn’t need approval. We can quote the work either way.
Yes. We serve the entire Clute area, including neighborhoods off Brazoswood Drive, Main Street, and the roads near Richwood. Call (903) 417-0793 and the live person who answers can confirm the day’s schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clute Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.