Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Alderwood Manor, WA
Calder Gate Repair is the dedicated gate company serving Alderwood Manor, WA, with electric gate repair, gate opener replacement, and full mechanical service for swing and slide gates. Most Alderwood Manor repair calls we handle are for openers that stopped responding, gates that drifted off their track, or hinges that seized after a wet winter. Our three core services each have their own Alderwood Manor page, linked just below. For a straight answer on your gate, call us at (903) 417-0793.
Why Alderwood Manor Homes Are Different
Alderwood Manor properties tend toward larger lots with long driveways, privacy gates set back from the street, and opener systems that have seen years of Puget Sound moisture. That combination shapes the work we do here. Swing gates on sloped entries put uneven load on the hinge side, which is why we see bent hinge brackets and sagging gate leaves more often in this area than in flatter developments. The damp, mild climate means corrosion on control boards, limit switches, and low-voltage wiring shows up earlier than it would in a drier region, so we test for moisture intrusion on nearly every diagnostic visit.
Many neighborhoods also operate under HOA guidelines that dictate gate style, height, and even opener noise levels. Before swapping out a motor or control board, we check the basics so the replacement doesn’t create a compliance problem. If you’re near Martha Lake or up toward the Snohomish County line, your gate may also be exposed to more wind and standing water, which changes which opener torque ratings actually hold up. Knowing the difference between a Bothell-Everett Highway side street and a cul-de-sac off 164th Street SW matters, because the site conditions dictate the fix, not just the brand on the opener.
Our Main Alderwood Manor Services
The two calls we get most from Alderwood Manor homeowners are for gates that won’t open and openers that run but don’t move the gate. Here’s what each job looks like locally.
Gate Repair in Alderwood Manor
Gate repair in Alderwood Manor typically means restoring a gate that has stopped swinging, started dragging, or no longer closes flush against its stop. We work on bent hinge posts, rusted steel frames, worn rollers on slide gates, and gates knocked out of alignment by a car bump or a wind storm. The fix usually starts with a track and level check, then we quote the repair before any work begins. For the full scope of what a gate repair covers here, see Gate Repair in Alderwood Manor.
Electric Gate Repair in Alderwood Manor
Electric gate repair in Alderwood Manor is the electrical side of the same problem: low-voltage shorts, failed transformers, photo eye sensors blocked by wet leaves, and control boards that have absorbed moisture. We trace circuits, test the safety edges, and replace components from brands like Viking and DoorKing using parts that match your existing system. No guessing, no board swaps on a hunch. Details on what’s covered are on the Electric Gate Repair in Alderwood Manor page.
Gate Opener Repair in Alderwood Manor
When the opener motor hums but the gate doesn’t move, or the remote works intermittently, the opener itself is usually the culprit. Gate opener repair in Alderwood Manor covers limit switches, capacitor failures, stripped drive gears, and receiver boards. Ghost Controls and Elite openers are common here, and we carry the replacement parts that get those units running again without waiting on a backordered console. See Gate Opener Repair in Alderwood Manor for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Alderwood Manor
We’re factory-familiar with Viking, Ghost Controls, DoorKing, and Elite, and we stock the most common control boards, remotes, and safety sensors locally so repairs don’t stall on shipping. When a part isn’t in the van, we source directly through our brands network, usually landing parts within two business days in Alderwood Manor.
Pricing for Gate Company in Alderwood Manor, WA
| Service | Typical range in Alderwood Manor |
|---|---|
| Diagnostic visit (credited toward repair) | $59 – $119 |
| Gate opener repair (most models) | $180 – $390 |
| Control board replacement | $220 – $460 |
| Limit switch adjustment or replacement | $95 – $180 |
| Photo eye sensor replacement | $110 – $210 |
| Gate hinge replacement (pair) | $160 – $340 |
| Slide gate roller and track repair | $200 – $420 |
| Full opener replacement (residential) | $650 – $1,200 |
| Keypad or receiver board install | $130 – $260 |
| Low-voltage wiring repair | $120 – $300 |
What pushes a quote toward the high end in Alderwood Manor is usually water intrusion onto a corroded board, a gate post that needs re-setting in concrete, or an opener that’s so obsolete the matched part is only available from a specialty distributor. Whatever the number, it’s written down and agreed to before we turn a single bolt. You approve the price at the door, and that’s the price on the invoice.
Neighborhoods We Serve in Alderwood Manor
We run repair calls across the full Alderwood Manor footprint, from the streets off 164th Street SW up toward Martha Lake and over toward the Bothell-Everett Highway corridor. Most days we can reach any Alderwood Manor home within a 45-minute dispatch window once the truck rolls.
- Martha Lake
- North Alderwood
- Beverly Acres
- Stocker Farms area
- Larch Way corridor
Service Area – Cities Near Alderwood Manor
Our Alderwood Manor crews also cover nearby communities across the broader Puget Sound region. If you’re just outside our immediate area, check whether we serve your city: Seattle, WA, Spokane, WA, Tacoma, WA, or Vancouver, WA. Dispatch and scheduling are coordinated from the brand’s Seattle office; local crews handle Alderwood Manor jobs directly.
Serving Alderwood Manor, WA - Our Local Coverage Area
We’re based in the Alderwood Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alderwood Manor
Most Alderwood Manor calls get a technician dispatched the same day you call, with a live trackable arrival time. Emergency calls after hours route to a live person 24/7, not a voicemail, so you can book, update, or troubleshoot on the spot. Call (903) 417-0793 and we’ll give you a real window, not a four-hour range.
If your Alderwood Manor neighborhood has an HOA, most repairs that match the existing gate and opener are considered maintenance and don’t need approval. Full replacement or a visible style change may, and we can note that on your written quote so you have what the board asks for. When in doubt, we’ll flag it before work starts.
No. Every Alderwood Manor job starts with a written price, agreed to before work begins. If a repair fails within 365 days, the Done Right Promise means we return at no charge and make it right. The invoice you receive is the number you approved, and it’s payable from a digital link after the work is complete. Call (903) 417-0793 for a free estimate on your gate repair in Alderwood Manor today.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alderwood Manor Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.