Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Antelope, CA
Most gate repair in Antelope comes down to one of three things: a gate that won’t open, a gate that won’t close, or a gate that slams shut harder than it should. Calder Gate Repair handles all three, usually the same day you call. What makes Antelope jobs different from the rest of Sacramento County is the combination of heavy clay soil, summer heat that bakes opener circuit boards inside metal housings, and swing gates that drift out of alignment as the ground shifts between wet winters and bone-dry summers. We solve those problems with written pricing, a live arrival time, and a repair guarantee that actually has a start and end date. Call (903) 417-0793 and a real person answers, day or night.
Why Antelope Homes Are Different
Antelope’s housing stock trends toward larger lots with driveway gates on steel posts set into that heavy clay soil. Clay expands when it’s wet and contracts when it’s dry, so a gate that swings cleanly in March can drag or bind by August. We see this most often along Antelope Road and in the neighborhoods feeding off Walerga Road and Elverta Road. The shift is gradual, so homeowners often don’t notice until the opener starts laboring, then fail. That’s a repairable condition, not an emergency, but it’s one a generic gate tech who doesn’t understand the local soil will misdiagnose as a bad motor.
Heat is the second factor. Gate opener electronics live inside control boxes that face the afternoon sun. In July, temperatures inside those boxes can run 40 degrees over ambient. Capacitors and transformers degrade faster, and battery backup units, especially on solar-charged openers, lose capacity. When we open a control box on an Antelope gate in summer, we check for heat stress first. It’s the most common opener failure we see here that isn’t mechanical.
There’s no city-specific gate permit for repairs in Antelope, and most HOAs in the area, including communities near Lone Oak Park and Tetotom Park, allow like-for-like opener replacement without submitting plans. Full gate replacement or a change in gate style is a different story, and you’ll want HOA signoff before you buy hardware. We’re happy to talk through what your association typically wants to see before the estimate.
Our Main Antelope Services
Most Antelope homeowners call us for one of two things: a gate that’s physically jammed or sagging, or an opener that’s stopped responding. Here’s what each looks like in Antelope specifically.
Gate Repair in Antelope
This is the mechanical side of the job: hinges, wheels, posts, steel frames, chain-link mesh, and the alignment work that comes from clay soil movement. In Antelope, we regularly see hinge posts that have tilted inward a few degrees, pulling the gate off latch. That causes the opener to strain, then trip. We correct the post or install an adjustable hinge to compensate, reset the travel limits, and test the full cycle under load. Same-day service is typical for this work. See Gate Repair in Antelope for pricing and what the full repair covers.
Electric Gate Repair in Antelope
Electric gates add the full automation chain: the motor, the control board, the safety loops or photo eyes, and the wiring run from the house or a dedicated breaker. Antelope’s heat shortens the life on older capacitance-heavy boards, and we also find a lot of chewed-through low-voltage wiring at the gate base from rodents, which then shorts and blows the transformer fuse. We diagnose the failure from the gate back to the panel, replace only what’s actually failed, and quote the whole job before turning a screwdriver. Full detail is on Electric Gate Repair in Antelope.
Gate Opener Repair in Antelope
When the gate is physically fine but the opener won’t respond, hums without moving, or opens halfway and stops, you’ve got an opener fault. In Antelope, the most common causes we see are limit switch failures (the small sensor that tells the gate when to stop), stripped drive gears on older chain-drive units, and control boards cooked by relentless summer heat. Most opener repairs run under $350 total, and we carry parts for the major brands on the truck so a one-visit fix is the norm. Full breakdown at Gate Opener Repair in Antelope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Antelope
We’re factory-familiar with the openers Antelope homes actually have installed: our brands include Viking, FAAC, BFT, and Linear, plus their residential siblings. We keep common parts, gears, remotes, and boards on the truck, so a single-visit repair is the rule rather than the exception.
Pricing for Gate Company in Antelope, CA
This is what you should expect to pay for gate work in Antelope, before parts. The price is quoted and agreed in writing before any work starts. That number doesn’t change at the door.
| Service | Typical range in Antelope |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $200 – $450 before parts |
| Mechanical gate repair | $150 – $400 before parts |
| Control board replacement | $190 – $420 before parts |
| Limit switch replacement | $150 – $270 before parts |
| Photo eye / safety sensor replacement | $130 – $250 before parts |
| Remote programming / keypad setup | $80 – $160 |
| Gate opener installation | $450 – $950 before parts |
| Full gate opener replacement | $600 – $1,400 before parts |
What pushes a price toward the top of the range in Antelope is usually access: a gate post sunk deep into clay at the back of a long driveway, a power run that needs a trench, or a control box that’s been heat-cycling for eight summers and has taken the transformer with it. What keeps the price honest is simple: you get a written quote first, and if the repair fails within 365 days, we come back free. That’s the 365-Day Done Right Promise, in writing on every job.
Neighborhoods We Serve in Antelope
We work every corner of Antelope, from the older lots along Antelope Road to the newer developments off Walerga Road and Elverta Road. Our typical response windows apply to the whole area; same-day for gate and opener repair, and next-day for installs that need a measure first.
- North Antelope, around Lone Oak Park
- Central Antelope, along Antelope Road
- Communities off Walerga Road near Tetotom Park
- West Antelope near Elverta Road
- South Antelope toward Antelope Crossing
Service Area – Cities Near Antelope
If your gate is on the Antelope side of the county line, we’ll come take care of it. We also serve the cities that sit right on Antelope’s border. Our crews work locally in North Highlands, CA, Elverta, CA, Rio Linda, CA, and Citrus Heights, CA. Dispatch and scheduling are handled from our Sacramento office, and crews reach Antelope with no cross-town delay.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Antelope
Gate repair and opener repair calls in Antelope are typically same-day. Electrical diagnostics and motor replacements usually happen within 24 hours. Installations get scheduled after a free on-site measure, with written quote in hand before you commit.
For repairs and like-for-like opener replacement, almost never. If your Antelope HOA governs gate appearance and you’re changing hardware style, gate height, or adding a new pedestrian gate, get a written signoff first. We’ll help you identify what your association typically requires. Call (903) 417-0793 to talk it through.
If your gate or opener repair fails within 365 days, we return and fix it at no charge. Not a discount, not a “diagnostic fee.” A free second visit. It’s stated in writing on every single Antelope job, and it’s why burned-out boards and stripped gears shouldn’t scare you off calling us.
Call (903) 417-0793 for a free estimate. A live person answers, you’ll get a real arrival time you can track, and the price gets set in writing before anything moves. That’s how gate repair works in Antelope.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Antelope Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.