Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Antelope
Gate repair in Antelope usually means one of three things: a swing gate that’s dragging on the concrete, a slide gate that stalls halfway across the driveway, or an opener that hums but won’t move the gate. Most repairs here run $180 – $340 before parts, and the real cost driver is almost always what’s happening underground, not the motor. Antelope’s clay-heavy soil heaves with every irrigation cycle, and that movement finds its way into hinge posts, track mounts, and operator alignment. If your gate is acting up, call (903) 417-0793 and we’ll walk through what’s wrong before anyone dispatches. We serve every neighborhood in Antelope, from the older lots near Antelope Road to the newer subdivisions off Elverta Road and Walerga Road.
Why Calder Gate Repair Is Antelope’s Preferred Gate Repair Company
Calder Gate Repair isn’t a handyman service that occasionally touches gates. We’re a dedicated Gate Repair team inside the Relay Home Co. network, and we’ve been at this since 2009. When we roll up in Antelope, the truck is stocked for the work we actually see here: post footings set in expansive clay, slide tracks that have wandered out of plumb, and older openers missing proper entrapment protection. Homeowners along North Loop Boulevard and Scotland Drive call us because the first repair actually holds. When it doesn’t, our 365-Day Done Right Promise means we come back and make it right at no charge.
Every Antelope job gets a written price before any work starts. No verbal estimates that turn into surprises. No “while we’re here” add-ons. The number on your invoice matches the number you approved at the door. Nico Alvarez runs our team, and he’s built the whole operation around one idea: gate repair should feel like ordering a ride, not dealing with a contractor. You see who’s coming, when they’ll arrive, and what it costs before a single bolt gets turned.
Driveway Gate Repair in Antelope
Driveway Gate Repair in Antelope usually comes down to two jobs: getting the gate to hang and travel correctly, and making sure the opener can move it without straining. On the swing gates common to older Antelope lots, the hinge post is the weak link. Antelope’s slab-on-grade construction means the post is often set into shallow fill, and the clay underneath expands and contracts with every summer irrigation cycle. That’s why a gate that sagged last spring will sag again this spring if the post wasn’t addressed. We don’t just re-hang the panel; we check the footing first, because that’s where the problem actually lives.
Gate Realignment and Post Correction
When an Antelope gate drags or won’t latch, the post has usually moved or the hinges have worn enough to throw the panel off. We measure the reveal, check the post with a level, and determine whether correction means new hardware or re-pouring the footing. On a recent Antelope Road job, a LiftMaster slide gate had started jumping its stop tab because the post footing had settled on one side. Correcting the footing, not just the panel, fixed it for good.
Electric Gate Opener Repair in Antelope
Opener failures in Antelope split into electrical and mechanical problems. Capacitors fail. Limit switches drift. The limit switch is the small sensor that tells the gate where to stop, and when it’s off, the gate overtravels or reverses early. On mechanical side, chains stretch and gear teeth wear, especially on gates that run multiple cycles a day. Most Antelope opener repairs run $190 – $320 before parts, depending on whether we’re replacing a capacitor or rebuilding the drive assembly.
Gate Welding in Antelope
Gate Welding in Antelope addresses the structural failures that hardware alone can’t fix: cracked rails, snapped pickets, and post brackets that have torn free. Most Antelope gates are steel, and steel fatigues. The combination of summer heat, irrigation water on bare metal, and the constant flex of a gate being pushed around by shifting ground takes its toll. We weld on-site when the gate can stay in place, or pull panels and posts for bench work when the damage runs deep. Weld repair in Antelope typically runs $140 – $280 per repair point, with the range reflecting the thickness of the material and whether post removal is required.
Hinge & Post Repair
Hinge posts in Antelope’s clay soil fail more often than in neighboring cities because the ground literally moves under them. We re-pour footings with the right depth and drainage for the soil type, then re-hang the gate so it sits properly from day one. If your gate sags within a year of a repair, the footing was the missed step, not the hinge.
Weld & Rust Repair
Rust around Antelope isn’t coastal; it’s irrigation and sprinkler overspray hitting bare steel, plus summer heat accelerating oxidation. We grind back to clean metal, weld new material where sections are compromised, and coat the repair so water stops getting in. A gate that’s rusting at the bottom rail today will crack it within a few seasons if left alone.
Trusted Brands We Service in Antelope
Antelope homeowners run a mix of older and newer openers, and our techs are factory-familiar with the brands we see most: LiftMaster and DoorKing on the residential side, FAAC and BFT on higher-end installs, and Linear and Viking scattered across the rest. We stock common parts for these locally, which means a bad limit switch or control board in Antelope doesn’t turn into a multi-day wait for shipping. If your opener is older or discontinued, we’ll tell you plainly whether a repair makes sense or whether replacing the operator is the cheaper path over the next two years.
Common Gate Repair Problems We See in Antelope Homes
- Post footings moving in expansive clay. Antelope’s soil absorbs irrigation water and swells, then shrinks during the dry season. That cycle pushes hinge posts and slide track mounts out of position, which is why so many local gates sag again after a panel-only repair.
- Slide gate operators stalling on uneven slabs. Wider driveway aprons and older concrete that’s cracked or settled put slide tracks out of plumb. The operator fights the track every cycle, and eventually the motor or gearbox gives up.
- Missing or defeated entrapment protection. Older Antelope gates often have photocells that were never installed or were bypassed years ago. UL 325 compliance isn’t optional; we test photocells and auto-reverse on every repair so the gate stops and reverses if a child or pet crosses the path.
- Solar openers losing battery reserve in summer heat. Unshaded driveways in Antelope get brutally hot, and solar panels lose efficiency when battery temperature climbs. The system that worked in spring can lock the gate open by August if the battery can’t hold a charge.
Pricing for Gate Repair in Antelope, CA
Most gate repairs in Antelope fall between $180 and $340 before parts. That covers the common work: realigning a gate, correcting a post, adjusting or replacing a limit switch, re-tensioning a chain, or welding a cracked weld point. Opener replacements run higher, typically $650 – $1,400 installed depending on the brand and whether we’re reusing existing mounting hardware. Full slide track replacement, post re-pouring, or major structural welding can land between $500 and $1,100. Every Antelope job gets a written quote before we start, and the price we quote is the price you’ll see on the invoice. Call (903) 417-0793 for a free estimate, and we’ll give you real numbers, not a vague range that changes later.
We Also Serve Cities Near Antelope
If you’re just outside Antelope, we regularly run crews to Gate Repair in Antelope and the surrounding communities, including North Highlands, Elverta, Rio Linda, and Citrus Heights. Scheduling works the same everywhere: a live person answers, you get a trackable arrival window, and the price is in writing before any work starts.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Antelope
Your gate keeps sagging because the hinge post footing has moved, not because the panel was re-hung wrong. Antelope’s clay-heavy soil expands when irrigation water soaks in and contracts during the dry season, and that movement slowly shifts a post set in shallow fill. A repair that only addresses the hinges and panel will last a season at best. The permanent fix is re-pouring the footing deeper with proper drainage, then re-hanging the gate. Call (903) 417-0793 and we’ll check the post before recommending any panel work.
Yes, we service all four, plus Linear, Viking, Ghost Controls, Elite, and Mighty Mule. Our techs work on these brands constantly across Antelope, and we stock common replacement parts locally so most repairs don’t wait on shipping. If your opener is one of the older LiftMaster or DoorKing models still running on the original control board, we’ll tell you honestly whether repair or replacement makes more financial sense. Call (903) 417-0793 with your model number and we’ll give you a straight answer.
A proper driveway gate repair includes checking the post footings and groundworks first, then the gate panel and hardware, then the operator and safety systems. We check the post with a level, verify the track or hinges are in alignment, test the opener’s force settings and limit switches, and run UL 325 entrapment testing on the reverse loop and photocells. Skipping the safety testing is how gates become dangerous; we test every repair before we leave. Most complete repairs in Antelope run $180 – $340 before parts, quoted and agreed before work starts.
In most cases, yes. Emergency repair calls in Antelope are dispatched the same day, and you’ll get a live arrival time you can track, not a four-hour window. If your gate is stuck open and the property can’t be secured, that’s an emergency; call (903) 417-0793 and we’ll tell you exactly when a tech will be there. Installations and full track replacements are scheduled, but urgent repairs don’t wait.
It’s more common in Antelope than in cities with less sun and less dust. Photocells are optical sensors, and when dust from dry summer soil builds up on the lenses, the beam scatters and the gate reads it as an obstruction. Irrigation overspray, spider webs, and direct afternoon sun hitting the reflector can all cause false triggers. We clean and realign the sensors first, then check whether the wiring or the photocell itself has failed. A no-trip photocell means the gate keeps reversing, which is annoying but safer than the alternative; a photocell that never triggers is the dangerous one. Call (903) 417-0793 and we’ll diagnose it properly.
If your gate is acting up in Antelope, don’t wait for the seasonal soil movement to make it worse. Call (903) 417-0793 for a free estimate, and Calder Gate Repair will give you a written price, a trackable arrival time, and a repair that holds. If it doesn’t, the 365-Day Done Right Promise means we’re back at no charge.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Antelope and the surrounding Sacramento region since 2009.