Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across North Highlands
Most gate repairs in North Highlands run $180 – $520 depending on what’s actually failing, and we’re usually on-site within 90 minutes for emergencies. Calder Gate Repair works throughout North Highlands, from the older homes off Watt Avenue to the newer subdivisions near McClellan, and we know this area’s gates have a specific problem most contractors miss: the soil moves, so the posts move, and the gate follows. If your gate is sagging, sticking, or just stopped responding, call us at (903) 417-0793 and we’ll put a real price in writing before any work starts.

Why Calder Gate Repair Is North Highlands’s Preferred Gate Repair Company
North Highlands homeowners call us because we show up when we say we will, with a live arrival time you can track from your phone, and because the price we quote at the door is the price on the invoice. No adjustment games. No “well, once we got into it” surprises. We’ve worked on gates across 95660 and 95661 long enough to know which opener brands hold up in our heat and which ones falter, and we keep common parts for FAAC, BFT, and Linear operators stocked locally so repairs move fast.
Nico Alvarez runs our crew, and every technician who shows up is background-checked, uniformed, and trained on the specific opener your gate uses. We are part of the Relay Home Co. family, established 2009, and every job comes with the 365-Day Done Right Promise: if the repair fails within a year, we come back free and fix it. That guarantee is written on every invoice, not buried in fine print.
Wrought Iron Gate Repair in North Highlands
Wrought iron gate repair in North Highlands usually comes down to two things: hinge post movement from our expansive clay soil, and rust working through older ornamental sections. A sagging iron gate on a long driveway off Walerga Road is rarely fixed by adjusting the gate panel alone, because the real problem is usually the post footing shifting underground. We lift the gate, re-set the hinge post in a properly compacted footing, and then address the hardware so the gate stays square through wet and dry seasons. Typical costs for this work run $280 – $650 depending on post condition and gate weight.
Hinge Post Re-Setting and Alignment
When clay soil expands after rain and contracts during our dry summers, hinge posts heave and tilt. We excavate, re-set, and brace the post, then re-hang the gate so it swings without dragging. This is the repair that actually lasts, not a quick bolt-tightening that fails again in six months.
Hinge Replacement and Rust Repair
Older iron gates in North Highlands often have barrel hinges worn into ovals or rusted pins that bind. We replace worn hinges with matched-weight hardware and repair rusted scrollwork or pickets so the gate looks right and operates smoothly.
Metal Gate Repair in North Highlands
Metal gate repair in North Highlands covers steel and aluminum gates, from basic panel gates on residential lots to heavier framed gates on commercial properties near Watt and I-80. The most common failure we see on metal gates here is weld fatigue at hinge plates, because our soil movement puts constant stress on the gate’s mounting points. We also handle rack and pinion slide gate drive components that corrode from seasonal moisture and temperature swings. Metal gate repair typically runs $190 – $480, with heavier structural work quoted in writing before we begin.
Weld Repair and Frame Straightening
When a weld cracks or a frame member bows, grinding it flat and re-welding is the correct fix. We inspect the entire frame for stress points so you aren’t paying for one weld today and another in three months.
Rack and Pinion Slide Gate Service
Slide gates along North Highlands’s main roads use rack and pinion systems that collect dirt and wear unevenly. We clean, inspect, and replace worn rack sections or drive pinions, which keeps the gate from stalling or binding mid-travel.

Trusted Brands We Service in North Highlands
Our technicians train on the openers North Highlands homeowners and businesses actually use. We’re factory-familiar with FAAC, BFT, Linear, and Viking equipment, plus LiftMaster, DoorKing, and the other big names in gate automation. That matters because a FAAC control board diagnoses differently than a Linear one, and guessing wastes your money. We stock common remotes, photocells, and limit switch assemblies locally so we can finish most repairs on the first visit. If your opener is older, we’ll still service it and give you honest guidance on whether repair or replacement makes more sense.
Common Gate Repair Problems We See in North Highlands Homes
- Hinge post footing heave from expansive clay soils. North Highlands sits on clay that swells when wet and shrinks when dry, which pushes posts out of alignment over time. A sagging gate here usually means the footing moved, not that the hinges “just came loose.”
- Misaligned safety photocells on automatic operators. Dirt, drifting posts, or even sun glare can knock photocells out of alignment, making the gate reverse or refuse to close. We clean, realign, and test every sensor as part of any opener repair.
- Corroded slide gate drive components. Our wet winters and hot dry summers cycle moisture through rack and pinion parts, accelerating rust and wear. We inspect the full drive path, not just the motor.
- Worn limit switches causing gate overshoot. The limit switch is the small sensor that tells the gate when to stop. When it fails on an older Linear or Viking operator, the gate slams or never fully closes. We replace and set the limits to factory spec.
Pricing for Gate Repair in North Highlands, CA
Here’s what North Highlands residents can expect to pay for common gate repairs. A standard hinge replacement or gate realignment runs $180 – $350. Wrought iron post re-setting with footing work typically lands between $280 and $650 depending on post size and whether we’re re-using existing concrete. Slide gate rack and pinion service runs $190 – $480, and opener repair including diagnostic time, labor, and common parts like limit switches or photocells averages $220 – $520. We quote the exact price in writing after a diagnostic, before any work starts. You’ll never get a surprise invoice. Call (903) 417-0793 to book a free estimate.
We Also Serve Cities Near North Highlands
Calder Gate Repair handles gate work throughout North Highlands and the surrounding area, including North Highlands neighborhoods like the Watt Avenue corridor and properties near McClellan. Our Gate Repair team also serves Antelope, Carmichael, Rio Linda, and Elverta, with the same written pricing and 365-day guarantee everywhere we work.
Serving North Highlands, CA - Our Local Coverage Area
We’re based in the North Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Highlands
In North Highlands, the most common cause is hinge post footing heave from expansive clay soil. When the ground swells after rain, it pushes the post upward and out of plumb, so the gate sags no matter how many times you tighten bolts. The lasting fix is re-setting the post in a properly prepared footing, then re-hanging the gate. We do this regularly off Watt Avenue, Walerga Road, and throughout 95660. Call (903) 417-0793 and we’ll assess your post footing and give you a written price.
Monthly. North Highlands’s dry summers and dusty conditions mean photocells collect dirt and drift out of alignment quickly. Place something in the gate’s path while it’s closing; if the gate doesn’t reverse within two seconds, the sensors need attention. As a rule, we check and realign safety photocells on every automatic gate repair we perform, and we verify the reversal pressure against the operator’s setting as well.
We service FAAC, BFT, Linear, Viking, LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule, plus most other residential and light-commercial openers you’ll find in North Highlands. Our technicians are factory-trained on those nine major brands, and we stock common parts so we can finish most opener repairs on the first trip.
For most repairs, yes. Emergency gate repairs in North Highlands are typically scheduled within 90 minutes for priority calls. We keep common parts for major brands on our trucks and in local stock, which is what makes same-day repair realistic. If your gate is stuck open or won’t close, call (903) 417-0793 and we’ll get you on the schedule immediately.
Yes. Many North Highlands properties have gates set back from the house with no power run to the gate. We install solar kits for FAAC, LiftMaster, and other major openers, including the panel, battery, and charge controller. We’ll also talk through whether your gate’s duty cycle works with solar or whether a small trench and direct power run is the smarter long-term fix. Estimates for solar conversions are free, and the price is always in writing before work starts.
If your gate is sagging, stalling, or refusing to open, call Calder Gate Repair at (903) 417-0793. Nico and the crew will get you a real arrival time, a written price, and a repair that stays fixed. Free estimates, 365-day guarantee, and a live person on the phone 24/7.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving North Highlands with written pricing and guaranteed gate repairs.





Before
After
Before
After
Before
After