Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Benbrook, TX
Gate repair in Benbrook, TX usually runs between $180 and $680 depending on what failed, and Calder Gate Repair can have a background-checked technician at your driveway with a written price before any work starts. Benbrook’s mix of 1970s and 1980s ranch homes, hillside lots along Mary’s Creek, and newer builds off Bellaire Drive means we see everything from tired chain-drive systems to modern FAAC and Viking hydraulic operators. Call (903) 417-0793 and a live person answers, day or night.
Why Benbrook Homes Are Different
Benbrook’s gate work follows the contours of the land. Homes along Timberline Drive and Park Center Boulevard sit on gently sloping lots where gate posts settle over time, throwing the gate leaf out of plumb and stressing the hinges until the opener fights itself. We routinely find opener motors burning out early on Benbrook properties because the gate was never re-hung after the post shifted half an inch – a fix that takes us under an hour but saves the opener entirely.
The climate plays in too. Benbrook gets the same fierce summer heat as Fort Worth, and that heat breaks down capacitor and circuit-board solder joints in exposed operator housings faster than homeowners expect. Then there’s the clay soil: it expands in spring rains and contracts in August droughts, which moves fence posts and leaves gate receivers misaligned. If your gate opens fine after a rain but sticks during a dry spell, that’s the soil at work, not your opener. Homes in the Timber Bend and Watersedge neighborhoods see this pattern more than flatter lots near Benbrook Lake.
Our Main Benbrook Services
Benbrook homeowners call us for two things more than anything else: a gate that stopped moving and the electric opener behind it. Each service has its own detailed Benbrook page below.
Gate Repair in Benbrook
A sagging or stuck gate in Benbrook usually comes down to hinges, posts, or the gate leaf itself. We inspect the post footings, re-hang the gate where the soil has shifted, and replace worn hinge pins or the whole hinge set before the opener takes any blame. On older Benbrook properties with original wood frames, we check for rot at the rail line and reinforce or replace the affected section. Our shop covers everything from minor alignment to full gate replacement, and every job includes a written price agreed before work begins. See our full Gate Repair in Benbrook page for pricing and what to expect.
Electric Gate Repair in Benbrook
Electric gate problems in Benbrook range from dead control boards and stripped gears to shorted photo-eye wiring and power surges that took out the transformer. We carry boards, limit switches – the small sensors that tell the gate when to stop – and receivers for FAAC, linear-arm, and swing operators common in the area. Benbrook’s clay soil and summer heat shorten the life of buried sensor loops, so we test voltage at the panel first, then work outward. Every electric repair carries the 365-Day Done Right Promise in writing. Get the details on our Electric Gate Repair in Benbrook page.
Gate Opener Repair in Benbrook
When the opener runs but the gate doesn’t move, or the remote stopped working overnight, you’re looking at a gate opener problem. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units – which covers nearly every opener installed in Benbrook since the 1990s. We rebuild gearboxes, replace receiver boards, reprogram remotes and keypads, and set travel limits so the opener stops pulling at the exact right point. Benbrook’s heat and moisture combo makes capacitor failure the most common culprit we replace in opener calls. We never swap parts on guesswork; we test the power path first. Read the full breakdown on our Gate Opener Repair in Benbrook page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Benbrook
We’re factory-familiar with FAAC, BFT, and Viking – three of the most common opener brands on Benbrook gates – and we stock common replacement boards and remotes for each. That means most opener and electric gate repairs happen same visit, not “we’ll order the part and call you back.” See our brands for the full nine-brand list.
Pricing for Gate Company in Benbrook, TX
| Service | Typical range in Benbrook |
|---|---|
| Gate opener repair | $180 – $680 |
| Limit switch replacement | $120 – $280 |
| Remote and receiver programming | $80 – $180 |
| Control board replacement | $250 – $650 |
| Gearbox rebuild | $280 – $600 |
| Hinge replacement (pair) | $150 – $450 |
| Gate wheel replacement | $120 – $300 |
| Photo-eye sensor replacement | $110 – $240 |
| Service call and diagnostics | $75 – $125 |
Benbrook pricing typically climbs when a gate post has shifted and needs re-setting in concrete, or when a swing gate was never given a proper reinforcement kit and the leaf has torqued. Whatever the job, you get a written price before the first bolt is turned – and the invoice matches that number.
Neighborhoods We Serve in Benbrook
We run crews through the whole city, from the lake-adjacent streets to the newer developments east of the railroad tracks. Our Benbrook response standard is simple: a live arrival time you can track, not a four-hour window.
- Timber Bend
- Watersedge
- Park Center
- Timberline Drive corridor
- Bellaire Drive area
Service Area – Cities Near Benbrook
Calder Gate Repair coordinates Benbrook dispatch from our Dallas-Fort Worth office. If you’re outside Benbrook proper, we also cover adjacent metro areas including Fort Worth, TX, Dallas, TX, San Antonio, FL, and Houston, TX. Same written-price promise, same 365-Day Done Right Promise on every repair.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Benbrook
Most Benbrook calls are scheduled same day or next morning. We send a live, trackable arrival time to your phone, and the technician shows up in uniform with the parts most Benbrook jobs need already on the truck. Emergency calls are answered by a live person 24/7 at (903) 417-0793.
Many Benbrook neighborhoods with front-facing gates, especially around Timber Bend and Watersedge, have HOA design rules about gate style and height. We work off your existing gate footprint, so our repairs don’t trigger design review. If you’re planning a full replacement, check your HOA’s covenant sheet first.
Yes. Benbrook homeowners run both styles, and the opener brands differ by style. We service FAAC and BFT hydraulic swing operators, Linear arm operators on slide gates, and Viking units on heavier commercial-style residential gates. The written price covers diagnosis and the full repair before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Benbrook Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.