Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Dallas, CA | Calder Gate Repair
We provide independent Gate Repair - Dallas for Ghost Controls systems, and the one thing that makes our work here different is that we diagnose for hail, heat, and shifting clay soil before we ever touch a control board. Dallas sits in a hail alley with long, high-UV summers that punish gate operator batteries and solar panels in ways most repair guides never mention. If your Ghost Controls gate is acting up, call us at (903) 417-0793 for a straight diagnosis and a written price before any work starts.
Why Dallas Residents Choose Us for Ghost Controls Service
Our techs work on Ghost Controls solar and AC gate operators week in and week out, from the starter swing kits to the heavier slide units, so we know their controller logic and battery behavior better than most general gate shops. We are an independent service provider and are not authorized, endorsed, or warrantied by Ghost Controls. That independence means we’re free to tell you when a genuine OEM part matters and when a quality aftermarket battery gets the job done for less.
Nico Alvarez, our owner and lead technician, spent nearly two decades working gate repair across Los Angeles County before starting Calder Gate Repair. He got tired of homeowners getting vague estimates and surprise charges, so he built a shop around one rule: the price you hear on the phone is the price on the invoice. Our Dallas customers get that same standard, backed by background-checked techs who show up in uniform with a live arrival time you can track.
We’re part of the Relay Home Co. family, established 2009, and every Dallas job carries the 365-Day Done Right Promise: if the repair fails within a year, we come back at no charge. That’s in writing, every time.
Common Ghost Controls Gate Repair Problems We Solve in Dallas
- Swollen batteries and dead solar panels. Dallas summers routinely push past 100°F, and sealed lead-acid packs inside Ghost Controls operators swell and lose capacity after two or three seasons of that heat. We test the panel output and battery condition together, because replacing one without checking the other just means another call in six months.
- Control board moisture and corrosion. Spring and fall downpours across North Texas dump inches of rain in hours, and Ghost Controls control boxes aren’t always sealed well enough to shrug that off. Moisture gets in, terminals corrode, and suddenly the gate opens on its own or the limit switches stop responding. We see this constantly in Dallas.
- Hail-cracked housings and shorted boards. This is the one most gate shops outside Texas never think to check. Hailstones crack the plastic enclosure on a Ghost Controls control box, water follows, and the board shorts. Nearly every Ghost Controls call we run in Dallas starts with an enclosure inspection, not just a wiring check.
- Arm bracket and hinge fatigue on double swing gates. Dallas sits on expansive clay that swells when wet and shrinks when dry. Posts shift, the gate sags, and the operator strains against misalignment until the arms or brackets fatigue. We don’t just replace the bracket; we realign the gate so the new part isn’t fighting the same fight.
- Remote and keypad signal dropouts. Low-voltage wiring runs through Dallas attics and fence-line conduit bake in the summer heat, degrading insulation and causing intermittent signal loss. Homeowners often assume the receiver failed. We trace the run before we sell you a new board, because the fix is frequently a wiring repair, not a receiver replacement.
Ghost Controls Service in Dallas: What Local Conditions Mean for Your Equipment
Dallas sits in a hail alley and gets frequent spring hailstorms, and Ghost Controls’ exposed control boxes and solar panels on driveway gates take direct hits that crack housings and short boards in ways gate owners in hail-light metros never see. That means we check for hail-pocked panels and compromised enclosures on nearly every Ghost Controls call here, not just wiring faults. A gate that worked fine in March can fail in May because a March storm left a hairline crack in the enclosure, and the spring rains finished the job.
Add the clay soil to that equation and you get a uniquely Dallas failure pattern. A gate off White Rock Creek in the Lake Highlands area might have a perfectly healthy board but a hinge post that’s drifted half an inch since the last big rain. That drift makes the Ghost Controls operator reverse mid-travel because the load profile changed. Other shops chase the board. We check the post, the arm geometry, and the battery health in the same visit, because in Dallas the problem is rarely just one thing.
Ghost Controls Models & Products We Service in Dallas
We cover the full Ghost Controls lineup you’re likely to have on a Dallas driveway: the TSS1 single swing gate opener kit, the TDS2 dual swing kit for heavier double gates, the TSG1 slide gate operator for wider openings, and the AXO solar-ready automatic gate operator setups that so many Dallas homeowners run to avoid trenching power. For Electric Gate Repair in Dallas, we handle all of these models.
For parts, we keep genuine Ghost Controls control boards, arms, batteries, and remotes on the truck for the common failures. When an OEM battery pack is on backorder, we use quality aftermarket solar panels and sealed batteries so you’re not waiting weeks. If the operator’s frame and gearbox are sound, we repair. If the housing is cracked through or the unit is past its service life, we tell you straight and quote a replacement honestly. Our Ghost Controls sales & service work in Dallas means you get a real diagnosis, not a parts cannon.
Ghost Controls Service Pricing in Dallas
Most Ghost Controls gate opener repairs here run $180 to $340 before parts, depending on what the diagnosis turns up. A battery pack replacement typically lands in the $120 to $220 range installed. Control board replacement runs $220 to $400 with the part. Solar panel replacement for a Ghost Controls setup usually runs $150 to $300 depending on wattage and whether we’re reusing your mounting hardware.
What drives the cost is what the gate is actually doing when we arrive, which is why the diagnostic visit matters. Every estimate is free, and the price is quoted and agreed in writing before any work starts. The number on the invoice is the number we agreed to at the door. That’s not a perk; it’s how Calder Gate Repair runs. Call (903) 417-0793 and Nico will walk you through what he thinks is wrong before you commit to anything. As he puts it: “Tell me what it’s doing, and I’ll tell you what it’ll cost – before I touch anything.”
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Dallas
Yes, it genuinely does. The sealed lead-acid batteries in Ghost Controls operators are rated for typical ambient temperatures, and Dallas regularly exceeds that for months at a time. Two to three seasons of 100°F-plus afternoons is often enough to swell the pack and cut its capacity below what the operator needs to complete a full cycle. The fix is a fresh sealed battery and, on solar setups, a panel output test to make sure the system is actually recharging. Call (903) 417-0793 for a battery health check; we can usually test it in one visit.
Moisture is getting into the control board and bridging contacts that should stay separate, which makes the gate behave like someone pressed the remote. In Dallas, this is almost always the result of a cracked or degraded control box seal, sometimes from hail, sometimes from years of sun. We open the enclosure, dry and clean the board if it’s salvageable, and replace the seal or housing so it doesn’t happen again.
Yes. Clay soil movement is a routine part of Ghost Controls slide gate work in Dallas, and we don’t just band-aid the operator. We check the post alignment, the slide track, and the gate’s travel path, then correct what’s shifted before adjusting the operator. If the post is too far gone to shim, we say so and quote the post reset as part of the repair, in writing, before we start.
We keep genuine Ghost Controls control boards, remotes, arms, and batteries on the truck for the common TSS1, TDS2, TSG1, and AXO failures. When a specific OEM board is out of stock, we tell you the lead time and offer a quality aftermarket option if one exists. You’ll know what’s going on the gate before we turn a single bolt.
If the frame and gearbox are sound, repairing makes sense in most cases. If the housing is cracked, the gearbox is grinding, or the unit is past its expected service life, a replacement is usually the better long-term move and we’ll quote it honestly. The decision comes from what we find during the diagnostic, and the diagnostic is free. Call (903) 417-0793 to schedule a check; the written estimate tells you both paths.
A homeowner off the Katy Trail area called because her Ghost Controls TDS2 dual swing gate had started reversing halfway open and sometimes not latching at all. We found the battery pack had swollen under the summer heat and a limit switch was sticking, so we replaced the pack and switch, then realigned the sagging hinge side on the clay-shifted post. The gate has cycled cleanly since, and we walked her through the manual release in case the next storm knocks out power.
Service Areas Near Dallas
Calder Gate Repair serves Dallas and the surrounding communities across the metro. If your gate is just outside the city line, we likely cover you too. We also run dedicated Ghost Controls routes in Ghost Controls service in Fort Worth and Ghost Controls service in Jacksonville. For a full look at where our trucks go, check the Dallas service area page.
Book Your Ghost Controls Service in Dallas Today
Ghost Controls gate acting up? Call (903) 417-0793 now for a free estimate. A live person answers 24/7, and same-day service is often available in Dallas. You’ll get a written price before we start, and the 365-Day Done Right Promise on the work we do.
Written by Nico Alvarez, Owner & Lead Technician at Calder Gate Repair, serving Dallas since 2009.