Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Briar, TX
Finding a gate company in Briar, TX that shows up when they say they will and puts the price in writing before touching a bolt shouldn’t be hard. We’re Calder Gate Repair. Our crews work on Briar gates every week, from older chain-drive openers on ranch-style properties to newer FAAC and LiftMaster systems on custom homes. If your gate won’t open, sags, or the opener hums but nothing moves, call (903) 417-0793 and a live person answers, any hour, any day.
Why Briar Homes Are Different
Briar sits on the northwest edge of the Metroplex, and the lots out here tend to be bigger than what you’d find in closer-in suburbs. That means longer gate runs, heavier gates, and more openers working harder than they were probably specced for. Add in Texas clay soil that shifts with every wet-dry cycle, and posts drift. A gate that closed perfectly in March might drag or bind by August. We see that pattern constantly in Briar.
Wind matters too. Briar gets open, unobstructed gusts that push against wide driveway gates, which stresses hinges, wheels, and opener arms. Homeowners also deal with wildlife pressure: deer, raccoons, and the occasional armadillo around fence lines mean gates that don’t hug the ground or that leave a gap invite trouble under the gate itself. Older swing gates with exposed limit switches, the small sensors that tell the gate when to stop, collect dust and grass clippings out here faster than people expect. These aren’t exotic problems. They’re just Briar problems, and they show up on service calls every month.
Our Main Briar Services
These are the three jobs Briar homeowners call us about most. Each has its own page with pricing, timelines, and what to expect, linked below.
Gate Repair in Briar
A gate that drags, hangs crooked, or won’t latch is a security problem, not just a nuisance. In Briar we commonly find bent hinge plates, seized wheels, and posts that have shifted in the clay. We straighten, reinforce, replace, and realign until the gate swings true, then test the full travel. No temporary fixes that fail in six months. See Gate Repair in Briar for real price ranges and response times.
Electric Gate Repair in Briar
Electric gates combine the mechanical side with motors, wiring, control boards, and safety sensors. Briar’s older installations often have corroded wire splices, failing photo eyes, or boards that took a hit from a lightning storm nearby. We diagnose the entire system, not just the symptom. Read more on Electric Gate Repair in Briar.
Gate Opener Repair in Briar
The opener is the motor and brain of the system. In Briar, FAAC and LiftMaster units are common, and we see arm failures, stripped gears, and control boards that no longer respond. Whether it’s a sliding gate on a long ranch driveway or a swing gate at the front of the property, we carry parts for the brands we service and get your opener working again quickly. Details on Gate Opener Repair in Briar.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Briar
We’re factory-familiar with FAAC, BFT, Linear, and Viking, plus five other major opener brands. Each brand has quirks. FAAC boards behave differently than BFT boards, and Linear’s plastic gears wear differently than Viking’s. We know the differences. See our brands page for what we stock and why multi-brand training matters.
Pricing for Gate Company in Briar, TX
| Service | Typical range in Briar |
|---|---|
| Diagnostic visit (credited if we repair) | $65 – $95 |
| Gate hinge replacement | $140 – $280 |
| Wheel or roller replacement | $120 – $240 |
| Opener arm replacement | $200 – $350 |
| Control board replacement | $300 – $700 |
| Photo eye replacement | $150 – $275 |
| Limit switch replacement | $120 – $220 |
| Opener motor replacement | $400 – $900 |
| Full opener install (parts included) | $800 – $1,800 |
Heavier gates, longer runs, and older conduit with failing wire push Briar jobs toward the upper end of those ranges. Whatever the number is, you’ll see it in writing before any work starts, and that written price is the price on the invoice. Always.
Neighborhoods We Serve in Briar
Calder Gate Repair covers the entire Briar area, from the larger lots off Highway 199 to the residential streets closer to Eagle Mountain Lake. Our technicians drive these roads regularly and know the common gate types in each area.
- Lakeside communities near Eagle Mountain Lake
- Neighborhoods along Hwy 199
- Properties off Boswell Road
- Wide-lot ranch-style homes throughout north Briar
- Homes along the east side near Saginaw
Service Area – Cities Near Briar
While this page focuses on Briar, our gate repair crews also serve nearby areas, including Fort Worth, TX, Dallas, TX, Houston, TX, and San Antonio, FL. Dispatch runs from the brand’s Dallas-Fort Worth office, but the technicians you’ll see at your gate live and work in the local area.
Serving Briar, TX - Our Local Coverage Area
We’re based in the Briar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Briar
Most Briar calls get same-day or next-day service. If you call before noon, we can typically have a background-checked technician at your gate the same day, with a live arrival time you can track on your phone. Emergency calls are answered 24/7.
Some Briar HOAs require approval for gate replacement but not for repairs. If you’re just fixing the opener, hinges, or wiring, most associations don’t care. We can’t speak for every HOA, but our team will flag it if your specific project looks like one that needs approval before work begins.
No. Estimates are free, and every job comes with a written price before we start. The number on the invoice is the number we agreed to at the door, never a surprise. Call (903) 417-0793 and a live person will set it up.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Briar Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.