Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Burien, WA
Calder Gate Repair is the gate company Burien homeowners call when a gate stops opening, starts grinding, or refuses to close all the way. We handle gate repair, electric gate repair, and gate opener repair across the city, from the hills above Puget Sound down to the flats near Highway 509. Burien’s mix of 1940s through 1990s homes means we see everything from 30-year-old swing arms to newer slide-gate systems, and the salt air from the Sound accelerates wear on hinges, circuit boards, and motor housings. Call us at (903) 417-0793 and a live person picks up, day or night.
Why Burien Homes Are Different
Burien sits on a slope. Homes in Gregory Heights, Seahurst, and Three Tree Point sit on steep lots where the gate often marks the only flat entry point. That means gate posts take real pressure, and when one starts to lean, it puts the whole gate out of alignment fast – we see this more in Burien than in flatter pockets of King County. The marine moisture is the other big factor. Winter rain, dense fog off the Sound, and year-round damp accelerate corrosion on gate hinges, opener arms, and circuit boards. A gate that works fine through a Seattle summer often fails by November in Burien when a limit switch or capacitor finally gives out. Add in a lot of older housing stock – Burien grew fast after World War II, and many entry gates date to remodels in the 1980s and 1990s – and you get a mix of older FAAC and Linear controls alongside newer smart openers. None of it is exotic to us. It is just what a Burien gate job looks like.
Our Main Burien Services
Burien homeowners call us most for two things: a gate that stopped moving entirely, and an opener that hums but won’t budge. Each service has its own Burien page with full pricing and details.
Gate Repair in Burien
A Burien gate repair usually starts with the physical structure: hinges, wheels, posts, and the gate arm itself. Salt air and wet winters are hard on hardware. We check the post alignment first, because a leaning post makes even a strong opener work twice as hard. Then we move to the hardware, wheels, and chain or belt if one is present. We supply a written price before turning a single wrench, so you know exactly what the repair involves. Full details on our Gate Repair in Burien page, including what we stock locally.
Electric Gate Repair in Burien
Electric gate repair in Burien usually means the gate has power but moves slowly, stops mid-cycle, or trips a breaker. That points to the electrical side: wiring, control board, transformer, or capacitor. Damp soil and rain-saturated conduit are common culprits here, more so than in drier inland neighborhoods. We bring parts for most major systems and quote the job in writing before starting. See the Electric Gate Repair in Burien page for the full breakdown.
Gate Opener Repair in Burien
When the opener grinds, clicks, or does nothing at all, that is a gate opener repair job. Burien’s damp months are hard on opener motors and control boards, especially on older Viking or BFT units mounted without much weather protection. We diagnose the opener itself – limit switch, gear train, receiver board, or motor – and give you a written price before we order anything. Learn more on our Gate Opener Repair in Burien page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burien
We are factory-familiar with the openers Burien homeowners actually own, including FAAC, BFT, Linear, and Viking. We do not fumble through manuals on your driveway. Most common parts fit our trucks, so the fix does not wait on a parts shipment. See our brands for the full picture.
Pricing for Gate Company in Burien, WA
| Service | Typical range in Burien |
|---|---|
| Gate repair – diagnostic visit | $75 – $130 |
| Hinge replacement (per hinge) | $180 – $350 |
| Wheel or roller replacement | $150 – $280 |
| Post realignment | $250 – $500 |
| Chain or belt replacement | $180 – $400 |
| Control board repair | $220 – $480 |
| Limit switch replacement | $140 – $260 |
| Capacitor replacement | $80 – $180 |
| Gate opener motor replacement | $380 – $700 |
| Receiver board replacement | $160 – $320 |
Burien jobs tend to run toward the middle of these ranges. Steep lots make post work slower, and older gates sometimes need extra hardware once we get in there. What never changes is this: we hand you a written price before any work starts. The number on that paper is the number on the invoice.
Neighborhoods We Serve in Burien
We cover all of Burien, and most of our calls cluster in the areas where gates are part of the home’s entry design rather than a driveway-only install. You will see us across:
- Gregory Heights
- Seahurst
- Three Tree Point
- Boulevard Park
- Downtown Burien
We can usually have a technician to a Burien home within a few hours of your call. Emergency calls are handled by the same live person who answers on a Tuesday afternoon – no after-hours maze.
Service Area – Cities Near Burien
Burien is our home base for this page, but Calder Gate Repair also serves surrounding King County and Pierce County communities. We work from Seattle, WA south through Tacoma, WA, and our coverage extends across the state to Spokane, WA and down to Vancouver, WA. If you are near Burien but just over a city line, call us – we will tell you straight away if we can get to you.
Serving Burien, WA - Our Local Coverage Area
We’re based in the Burien area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Burien
Most Burien calls get a technician within a few hours. Same-day visits are available for urgent repairs, though installations and brand-new opener projects are scheduled for exact, agreed arrival windows, not dispatched on a rush basis. When you call, we give you a real ETA before we hang up.
Most gate repairs in Burien do not require a permit because the work is a like-for-like repair of an existing gate and opener. New installations or gates over a certain height on some lots may trigger a city review. We will tell you what the city requires before we start, and we quote plainly if a permit is part of the job.
Burien HOAs, especially in gated pockets around Seahurst and Three Tree Point, sometimes require the same hardware brand or a matching gate style. We are used to working with those specs. Send us the HOA document if you have one, and we will match the opener and hardware accordingly.
For gate work in Burien with a live person on the phone and a written price before any work starts, call (903) 417-0793 today. Estimates are free, and every repair carries the 365-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burien Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.