Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Coppell, TX
Gate repair in Coppell, TX usually costs between $95 and $850 depending on whether we’re fixing a broken hinge, replacing a gate opener circuit board, or welding a bent steel frame back into square. Most Coppell gates are ornamental steel or wrought-iron driveway gates paired with an opener, and the two most common calls we get are gates that won’t open at all and gates that open halfway, then stop. If your gate isn’t moving, dragging, or making a grinding sound, call (903) 417-0793 and we’ll walk you through what you’re seeing before we even send a truck.
Why Coppell Homes Are Different
Coppell was mostly built out between the 1980s and early 2000s, which means a lot of the driveway gates we work on were installed during that same window. The gate openers from that era, think early Linear and FAAC units, are solid machines, but their limit switches and circuit boards are now decades old and failing in predictable ways. Coppell sits on heavy clay soil that shifts with North Texas drought-and-rain cycles, and that movement is the number one reason gate frames in this city drift out of alignment. A gate that scrapes the ground in August may have had plenty of clearance in May. The other thing we see in Coppell is newer subdivisions with tighter HOA design standards. Gates have to match the fence, match the house, and stay quiet, which means cosmetic repairs matter as much here as mechanical ones. That combination of aging openers on shifting ground makes Coppell gate work its own animal. Nico Alvarez, who runs Calder Gate Repair, spends a lot of his spring call volume on gates that closed fine all winter and started binding the moment the soil dried out.
Our Main Coppell Services
These are the three jobs Coppell homeowners call us for most often. Each one has its own page with local pricing, brand notes, and what a same-day repair actually involves.
Gate Repair in Coppell
Gate repair in Coppell starts with finding out whether the problem is mechanical or electrical. Bent hinges, cracked welds, sagging frames, and wheels that have ground themselves flat are all mechanical. A dead opener, a blown fuse, or a sensor that won’t register is electrical. Coppell’s clay soil puts constant pressure on gate posts and welds, so we check the frame for square on every repair, not just the parts that are visibly broken. You can see the full breakdown of what we fix and what it typically costs by visiting our Gate Repair in Coppell page.
Electric Gate Repair in Coppell
Electric gates in Coppell run on a mix of low-voltage wiring, control boards, and safety sensors, and when any one of those fails, the gate usually refuses to move or refuses to stop. We see a lot of chewed wiring from Coppell’s squirrel population and a fair number of blown control boards after the lightning storms that roll through in spring. Safety edges and photo eyes are the two sensors we replace most, because without them a gate becomes a genuine hazard. The full scope is on our Electric Gate Repair in Coppell page, including what a new control board can run.
Gate Opener Repair in Coppell
When the opener itself dies, the gate becomes a very heavy, very expensive doorstop. Coppell homes built in the 1990s and early 2000s often still run their original opener, and parts for those units are still available but not always on a technician’s truck. We stock the most common replacement parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which means most Gate Opener Repair in Coppell jobs are done in one visit. If your opener is older than about ten years, that page also covers when replacement makes more sense than repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Coppell
The Coppell gates we work on most often run FAAC, Linear, Viking, and BFT openers, and we keep common replacement parts for each on hand so we’re not waiting on a freight truck. If you don’t know what brand you have, send us a photo of the opener arm and we’ll identify it before we arrive. See the full our brands list for everything we service.
Pricing for Gate Company in Coppell, TX
| Service | Typical range in Coppell |
|---|---|
| Gate opener repair | $95 – $400 |
| Gate sensor replacement | $150 – $350 |
| Gate hinge replacement | $150 – $350 |
| Gate wheel replacement | $180 – $400 |
| Gate frame repair | $250 – $700 |
| Gate opener remote replacement | $75 – $200 |
| Gate keypad replacement | $150 – $350 |
| Gate post alignment | $200 – $700 |
| Gate opener circuit board replacement | $250 – $650 |
| Full gate opener replacement | $450 – $2,600 |
What pushes a Coppell gate job toward the top of those ranges is usually soil movement, a gate that’s too heavy for its opener, or a frame that needs welding rather than adjustment. Parts quality is the other variable, a generic aftermarket board costs less than a factory FAAC or Linear unit. Whatever the number, you’ll see it in writing before we touch a bolt, and the price we quote is the price you pay. No surprises at the door, no add-on line items after the fact.
Neighborhoods We Serve in Coppell
We run calls all over Coppell, from the older streets near Andy Brown Park to the newer builds on the north side, and from the tree-lined neighborhoods around Town Center to the gated communities along Denton Tap Road. Here are a few of the areas where we’re out most weeks.
- Old Town Coppell
- Northlake Woodlands
- Andrews Estates
- Woodbridge
- Village at Cottonwood Creek
For most Coppell neighborhoods we can have a technician at your gate the same day you call, and you’ll get a live arrival time you can track, not a four-hour window.
Service Area – Cities Near Coppell
Calder Gate Repair is based in the Dallas-Fort Worth area and schedules Coppell jobs with local crews who know this city’s gates. We also take calls from neighbors in Lewisville, TX, Carrollton, TX, Grapevine, TX, and Addison, TX, so if your gate is a few minutes over the city line, you’re still in our coverage area.
Serving Coppell, TX - Our Local Coverage Area
We’re based in the Coppell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Coppell
Most Coppell calls get same-day service when you call before mid-afternoon. We dispatch with a live, trackable arrival time, so you see exactly when your technician will pull up. Emergency calls, like a gate stuck open overnight or a gate that won’t close before a trip, are prioritized.
Most Coppell HOAs only require approval for new installations or major changes, not for repairing what’s already there. If you’re replacing an opener or changing the gate’s appearance, we’ll work with your HOA’s design standards, and we can put the repair details in writing if your board wants documentation.
Every Calder Gate Repair quote lists parts, labor, and any disposal or trip charge as separate line items, totaled at the bottom. That total is the number you approve before work starts, and it doesn’t change unless we find something you approve in writing first. No verbal estimates, no open-ended invoices.
If your Coppell gate isn’t opening, closing, or sounding right, call Calder Gate Repair at (903) 417-0793 for a free estimate and a written price before we start. A live person answers, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coppell Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.