Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Country Homes, WA
Gate repair in Country Homes, WA typically runs $180 to $610 depending on what actually failed, and most jobs are diagnosed and fixed in a single visit. We’re Calder Gate Repair, the dedicated gate team inside the Relay Home Co. family. Country Homes has enough mature trees, gravel driveways, and older iron gates that we see certain failures repeat across the neighborhood – hinge sag, opener boards cooked by weather exposure, and keypads that stopped holding a code. Call (903) 417-0793 and a live person answers, day or night.
Why Country Homes Homes Are Different
Country Homes sits in a pocket of Spokane’s north side where the original houses were built on larger lots, and that shapes gate work in specific ways. Driveway gates here tend to be wide – often 12 to 16 feet – because they were sized for RV parking, boat storage, or a second vehicle kept off the street. A wider gate is a heavier gate, which means opener motors, hinges, and wheels all wear faster than they would in a newer subdivision with postage-stamp lots.
We also see a lot of mature evergreens close to fence lines. Roots shift concrete gate posts over time, and the gate that once swung clean starts dragging on the ground or binding against the latch plate. Add in hard freeze-thaw cycles during Spokane winters, and you get cracked post footings and electronics that pull more amperage than they should. These are the jobs we know how to solve in Country Homes without reseating an entire fence line unnecessarily.
Permitting here is straightforward for repair work. Replacing an opener, hinges, or a wheel carries no permit requirement in Spokane County. Full gate replacement on an existing driveway usually doesn’t either, because you’re working within the existing fence line. Where it gets tricky is new driveway access off a county-maintained road, which can trigger a right-of-way review. If we touch something that might need county sign-off, we’ll tell you before any work starts, not after.
Our Main Country Homes Services
Most Country Homes homeowners call us for one of three things: a gate that won’t open, a gate that won’t close, or an opener that runs but doesn’t move the gate. Each job below has its own Country Homes page where we cover pricing, parts, and what the fix involves. Here’s the quick version.
Gate Repair in Country Homes
Gate repair covers the physical gate itself: hinges, wheels, posts, sagging leafs, latch hardware, and the alignment issues that make a gate drag or refuse to latch. In Country Homes we regularly see hinge bolts wallowed out on older iron gates, wheels seized from gravel dust, and posts leaning just enough to throw the latch off. The fix usually means new hardware, not a new gate, and we write up that price before removing a single bolt. Get the full breakdown on Gate Repair in Country Homes.

Electric Gate Repair in Country Homes
Electric gate repair focuses on the power and safety side: control boards, keypads, photo eye sensors, loop detectors, wiring, and the safety edges that stop a gate if something is in the way. Country Homes yards with mature trees drop a lot of needles and debris into sensor lenses, and hard winters are rough on low-voltage wiring connections. We test every safety circuit as part of the repair, because a gate that closes on a car or a kid is not a working gate. Details are on our Electric Gate Repair in Country Homes page.

Gate Opener Repair in Country Homes
Gate opener repair is for the motor and drive unit itself: failed capacitors, stripped gears, bad limit switches, and arms or cables that have jumped track. Country Homes homeowners with older LiftMaster or Viking operators often hear the motor run but watch the gate sit still – that’s usually a stripped gear or a broken sprocket inside the housing. We stock common gear kits and arm assemblies locally, so many Country Homes opener jobs are done same day. The full scope is on Gate Opener Repair in Country Homes.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Country Homes
We work on Viking, Ghost Controls, and DoorKing openers most often in Country Homes, plus the wider lineup covered on our brands page. Common gear kits, control boards, and arm assemblies are stocked in our Seattle office and dispatched with the technician, which keeps most Country Homes repairs from dragging into a second visit.
Pricing for Gate Company in Country Homes, WA
| Service | Typical range in Country Homes |
|---|---|
| Gate hinge replacement (basic) | $195 – $330 |
| Gate wheel or roller replacement | $140 – $275 |
| Gate opener gear replacement | $290 – $420 |
| Limit switch repair or adjustment | $145 – $260 |
| Control board replacement | $245 – $610 |
| Keypad replacement and programming | $150 – $300 |
| Photo eye sensor replacement | $140 – $260 |
| Wiring diagnosis and repair | $120 – $260 |
| Post stabilization (minor) | $180 – $430 |
| Full gate opener replacement | $750 – $1,500 |
Prices in Country Homes push toward the higher end when a gate is oversized, the post is badly out of level, or the opener is old enough that parts are no longer made. Every job gets a written price before any work starts, and that number doesn’t change at the door.
Neighborhoods We Serve in Country Homes
We cover all of Country Homes and the adjoining north Spokane pockets where gates and driveways blur together. Response time for most Country Homes repair calls is same day or next morning, depending on when you call.
- Country Homes proper
- Five Mile area
- Fairwood
- North Spokane corridor
- Wandermere area
Service Area – Cities Near Country Homes
Our Country Homes technicians also run calls into the broader Spokane metro and, through the Relay Home Co. network, into other Washington cities. See our coverage in Seattle, WA, Spokane, WA, Tacoma, WA, and Vancouver, WA for what’s available in those areas.
Serving Country Homes, WA - Our Local Coverage Area
We’re based in the Country Homes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Country Homes
Same day in most cases. Call (903) 417-0793 and a live person answers 24/7, confirms what’s happening with your gate, and gets a technician dispatched with a trackable arrival time – not a four-hour window. Afternoon calls often schedule for the next morning.
Repair work on an existing gate almost never needs county approval in Country Homes, but some neighborhood covenants regulate gate height, materials, or color if you’re replacing the entire gate. If you have an HOA, we recommend a quick check before full replacement. We’ll flag anything obvious before quoting.
Yes. We cover all of Country Homes plus nearby north Spokane neighborhoods, and we’re part of the Relay Home Co. network, which started in 2009. Scheduling for Country Homes is coordinated from our Seattle office, with technicians stationed near the area. Call (903) 417-0793 and we’ll confirm your exact location.
Need a gate looked at in Country Homes? Call Calder Gate Repair at (903) 417-0793 for a written, upfront estimate. Nico Alvarez and our team will tell you exactly what’s wrong, what it costs, and when we’ll be there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Country Homes Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.





Before
After
Before
After
Before
After