Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Culver City, CA
Gate repair in Culver City means working on homes built between the 1920s and the 1980s, where driveway gates range from mid-century steel swing gates in Carlson Park to newer aluminum slide gates near the Baldwin Hills overlook. The marine layer off the coast keeps mornings damp, which rusts hinges and degrades circuit boards faster than homeowners expect, and the compact lots across Culver City mean a gate failure often blocks the only car access to the house. Calder Gate Repair handles all of it: gate repair, electric gate repair, and gate opener repair. Call (903) 417-0793 and a real person answers, 24/7.
Why Culver City Homes Are Different
Culver City sits in a narrow band of Los Angeles where the coastal fog reaches inland before burning off by midday. That recurring moisture settles into gate operator housings, corroding limit switches and control boards. We regularly open panels on gates near the Culver City park system and find green oxidation across terminals that would look clean in drier parts of LA. Steel swing gates also take a beating from the daily temperature swing. Metal expands in the afternoon sun, contracts at night, and over time welds crack and hinges sag.
The housing stock matters too. Many homes north of Washington Boulevard were built in the 1940s and 1950s, with narrow driveways and side gates that were never designed for modern opener hardware. Gates on those properties often need reinforcement plates or re-mounting before a new operator can be bolted on. South of the 10 freeway, newer construction near the Platform shopping district tends to use slide gates with heavier aluminum frames, which shifts the common failure points to track rollers and the motor gear train.
Permits are rarely required for repair work on an existing gate in Culver City. Replacing the operator with a like-for-like unit usually sits below the permit threshold, but if the work involves a full gate replacement or changes to the driveway approach, the city may want plans. We tell you upfront whether your job is repair or replacement territory so there are no surprises with inspectors.
Our Main Culver City Services
Homeowners call us most often about two things: a gate that will not open, and an electric gate that opens at the wrong time or not at all. Here is how each works in Culver City.
Gate Repair in Culver City
A gate that drags on its hinges, a track roller that has ground itself flat, a sagging frame that latches only when you lift the gate by hand: these are the repairs we see most in Culver City. Steel gates near the Fox Hills area pick up rust from the morning fog, and wood gates along the tree-lined streets of the city’s residential core swell when the humidity climbs. We repair the hardware, realign the gate, and quote you a written price before anything gets unbolted. Gate Repair in Culver City covers this work in detail.
Electric Gate Repair in Culver City
Electric gates in Culver City fail in predictable ways: a dead capacitor from a power surge, a photo eye knocked out of alignment by a delivery truck, a safety edge that no longer reverses the gate when it touches an obstruction. Because many Culver City driveways are tight, safety edges and photo eyes are not optional extras. They prevent a closing gate from hitting a car or a person. Electric Gate Repair in Culver City walks through how we diagnose and fix these systems.
Gate Opener Repair in Culver City
The opener is the motor and logic board that does the lifting. In Culver City, operators mounted on posts near the curb absorb vibration from passing traffic on roads like Overland Avenue and Sepulveda Boulevard, which loosens terminals and cracks solder joints over time. We service the leading brands and carry common replacement parts on the truck, so we can usually complete the job the same day. Gate Opener Repair in Culver City has the full breakdown of what we fix and how much it costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Culver City
We work on Linear, Viking, Ghost Controls, and DoorKing openers regularly across Culver City. We keep the parts those boards and motors fail on in stock locally, which means most repairs do not wait on a shipment. See our brands page for the full list of what we service.
Pricing for Gate Company in Culver City, CA
| Service | Typical range in Culver City |
|---|---|
| Gate opener diagnostic | $75 – $125 |
| Limit switch replacement | $150 – $250 |
| Photo eye alignment or replacement | $120 – $220 |
| Safety edge replacement | $180 – $300 |
| Control board repair | $225 – $425 |
| Capacitor replacement | $90 – $180 |
| Hinge repair or replacement | $140 – $280 |
| Track roller replacement | $110 – $210 |
| Gate realignment | $100 – $200 |
| Full opener replacement | $600 – $1,800 |
The price in Culver City depends on two things: what brand sits inside the operator box, and how much the local corrosion has worked through the wiring. Older steel gates near the industrial corridor on the eastern edge of Culver City tend to take longer to realign than newer aluminum gates in the hillside neighborhoods. Whatever the number, we hand you a written price before any work begins. That number is the number on the invoice.
Neighborhoods We Serve in Culver City
Our trucks cover the entire city. Most Culver City calls get a technician within the same day, and urgent jobs, like a gate stuck open across a driveway, are treated like the security emergency they are.
- Carlson Park
- Fox Hills
- Blanco / Culver Crest
- Clarkdale
- Park East
Service Area – Cities Near Culver City
We also run calls into the surrounding area. From Culver City we cover Marina del Rey, CA to the west, Inglewood, CA to the east, El Segundo, CA to the south, and Beverly Hills, CA to the north. Dispatch and scheduling run through our Los Angeles office, and crews arrive on site in Culver City with a live, trackable arrival time.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Culver City
Same-day service is standard for most Culver City calls. If a gate is stuck open and your driveway is exposed to the street, we prioritize that job. Call (903) 417-0793 and we will give you a live arrival window you can track from your phone.
Repair work, including replacing a gate opener with a like-for-like unit, does not typically require a permit in Culver City. Full gate replacement or changes to the driveway approach can trigger a permit review, and we will tell you if your job falls into that category before you commit.
Yes. We work with individual homeowners inside HOAs and with property managers on shared gates throughout Culver City. If your HOA needs a written quote or has an approved vendor form, we can provide both before scheduling the work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.