Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Des Moines, WA
Gate repair in Des Moines, WA usually involves salt air, steep driveways, and gates that work harder than they would inland. We’re Calder Gate Repair, the gate specialist inside the Relay Home Co. family, and we handle everything from a gate that won’t close to an opener that hums but won’t move. Most Des Moines gate repairs run $180 – $340 before parts, and we put that price in writing before any work starts. Call (903) 417-0793 and a live person answers, day or night.
Why Des Moines Homes Are Different
Des Moines sits on a hillside above Puget Sound, and that geography shapes nearly every gate job we do here. Driveways run steep, which means gate motors on Des Moines properties are fighting gravity every single cycle. A motor that might last fifteen years on a flat Seattle lot can wear out noticeably faster on a slope above Redondo Beach Drive. Add the marine air off the Sound, and you get corrosion on hinges, keypads, and circuit boards faster than homeowners expect.
Housing stock matters too. Des Moines has a mix of mid-century ramblers, 1970s and ’80s split-levels, and a growing number of newer builds and remodels near the Marina District and North Hill. Older homes often have gates that were installed with undersized openers, and when the original equipment fails, the fix isn’t always a straight swap. We’re familiar with how Des Moines properties are built because we work on them every week. Some of the communities here also have HOA guidelines about gate style and appearance, so we always flag any permit or approval question before ordering parts, not after.
Our Main Des Moines Services
These are the three jobs Des Moines homeowners call us about most, each with its own dedicated page for the full details.
Gate Repair in Des Moines
When a driveway gate sags, sticks, or stops latching in Des Moines, the usual culprits are rusted hinges, shifted posts, or a wind load off the Sound that’s been working the frame. We’ll diagnose the problem, put the repair cost in writing, and make the fix. If the gate has rusted through at a weld point near the saltwater air, we’ll tell you plainly whether it’s worth repairing or better to replace the frame. That honest read is the whole point of calling a specialist. Read more on our Gate Repair in Des Moines page.
Electric Gate Repair in Des Moines
Electric gates in Des Moines rely on a chain of parts, from the limit switch, the small sensor that tells the gate when to stop, to the control board, the brain that runs the whole sequence. When one link in that chain fails, the gate behaves unpredictably. Maybe it opens halfway and reverses. Maybe it beeps but doesn’t move. We trace the fault and repair only what’s broken, and because we’re trained on nine major opener brands, we’re not guessing. Details are on our Electric Gate Repair in Des Moines page.
Gate Opener Repair in Des Moines
Salt air and damp winters are rough on opener internals. Capacitors, relays, and limit switches inside the motor housing corrode faster here than they would in Spokane. If your opener arm moves slowly, makes a grinding sound, or won’t respond to the remote, we can often repair the motor itself instead of replacing the whole unit, which saves Des Moines homeowners real money. Read what that involves on our Gate Opener Repair in Des Moines page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Des Moines
We’re factory-familiar with the openers most common on Des Moines properties, including FAAC, BFT, Linear, and Viking. Because we keep the most-used boards, sensors, and remotes for these brands on our trucks, many repairs happen the same day instead of waiting on a shipped part. See the full our brands list.
Pricing for Gate Company in Des Moines, WA
| Service | Typical range in Des Moines |
|---|---|
| Gate opener diagnosis | $85 – $140 |
| Hinge replacement (pair) | $150 – $300 |
| Gate wheel or caster replacement | $110 – $220 |
| Limit switch adjustment or replacement | $120 – $250 |
| Control board replacement | $180 – $400 |
| Remote/programming service | $75 – $150 |
| Keypad installation | $160 – $320 |
| Gate opener motor repair | $200 – $500 |
| Photo eye sensor replacement | $130 – $250 |
| Full opener swap (parts + labor) | $600 – $1,500 |
What pushes a job toward the top of those ranges in Des Moines is usually steep driveway access, heavier-than-average gates built for privacy, or salt corrosion that means more parts need replacing than a simple fix would require. We’ll always show you the written number before any work begins, and the invoice matches that number at the end. No surprises.
Neighborhoods We Serve in Des Moines
We run service calls across all of Des Moines, from the hills of North Hill down to the waterfront by the Marina District, and out toward the Redondo and Woodmont areas. Our crews are dispatched from our Seattle office, so response times here are typically same-day or next-day for repair calls, depending on the time of day you reach us.
- North Hill
- Marina District
- Redondo
- Woodmont
- Zenith
Service Area – Cities Near Des Moines
If you’re in a neighboring community, we cover those too. Our repair crews handle jobs in Seattle, WA to the north and Tacoma, WA to the south. We also serve Vancouver, WA and Spokane, WA for larger scheduled installs and opener replacement work. If you’re not sure whether we cover your street, call and ask. A live person picks up.
Serving Des Moines, WA - Our Local Coverage Area
We’re based in the Des Moines area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Des Moines
Most repair calls in Des Moines are scheduled same-day or next-day. Dispatch comes from our Seattle office, but our techs are already working in the Des Moines area most days. Call (903) 417-0793 for a live arrival time you can track.
Some Des Moines communities with HOAs require approval for gate changes, especially if the style or color changes. Repairs that keep the existing look usually don’t. We’ll flag the question before you order parts so you’re not caught off guard.
Every repair includes our 365-Day Done Right Promise: if the repair fails within 365 days, we come back at no charge and make it right. That’s in writing on every job, along with your price, before work starts.
If your Des Moines gate won’t open, squeals, sags, or just isn’t working the way it should, call Calder Gate Repair at (903) 417-0793. We’ll give you a real arrival time, a written price, and a repair that’s done right the first time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Des Moines Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.