Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Alamo Heights
Electric gate repair in Alamo Heights usually runs between $180 and $420 for most opener, motor, and sensor fixes, with the majority of jobs completed in a single visit. Our Calder Gate Repair techs know the neighborhoods between Broadway and New Braunfels Avenue, and we show up with a written price before any work starts. If your gate won’t open, grinds when it moves, or trips its sensor for no reason, call us at (903) 417-0793. We’ll give you a real arrival time and a straight answer about what’s wrong.
Why Calder Gate Repair Is Alamo Heights’s Preferred Electric Gate Repair Company
Alamo Heights is its own kind of place: old live oaks, brick and stone houses from the 1930s and 1950s, and driveways that follow the lay of the land instead of a grid. That means gate posts shift, underground wiring gets stressed, and off-the-shelf fixes don’t always hold. Our techs know this. We’re not a general handyman service that occasionally opens a gate: Electric Gate Repair is what we do every day.
You also get a level of accountability most trades don’t offer. Calder Gate Repair is part of the Relay Home Co. family, founded in 2009, and every tech is background-checked and arrives in uniform. You get a trackable arrival time, before-and-after photos of the work, and a digital invoice you can pay from your phone. Our 365-Day Done Right Promise is written on every job: if the repair fails within a year, we come back at no charge. That’s not a sales line. It’s the Relay Standard, and it applies to every gate we touch in Alamo Heights.
Electric Gate Motor in Alamo Heights
Your Electric Gate Motor is the muscle that actually moves the gate leaf in Alamo Heights, and when it strains against a post that tree roots have nudged out of level, it fails faster than it should. We replace motors, drive gears, and limit switches on slide and swing gates, and we re-level the post if needed so the new motor isn’t fighting the same problem. Most gate motor repairs in Alamo Heights run $220 to $380 depending on whether the motor itself needs replacing or just the drive assembly.
Motor Replacement and Drive Alignment
A motor that hums but doesn’t move, or a gate that jerks and stalls mid-travel, often means the drive rack or chain is out of alignment. We check the motor’s current draw, the limit switches, and the gear condition before quoting any replacement, and the written price you get at the door is the price you pay.
Power Checks and Board Diagnostics
Summer thunderstorms in Alamo Heights send surges through gate circuits often enough that we keep spare control boards and fuses on the truck for LiftMaster, FAAC, and BFT units. If your motor isn’t getting power or the board isn’t responding, we’ll trace the problem back to the panel, not just guess at the motor.
Gate Access Control in Alamo Heights
Gate Access Control covers everything that tells your gate who to open for in Alamo Heights: keypads, remotes, loop detectors, intercoms, and vehicle sensors. When a keypad goes dead after a storm or the gate won’t recognize a remote, the problem is often in the wiring or the control board, not the device itself. Keypad and remote repairs in Alamo Heights typically run $140 to $260, and loop detector replacements run $300 to $600 because they require cutting and re-sealing the driveway surface.
Keypad and Remote Programming
We reprogram remotes and keypads on-site, sync them to your specific opener brand, and test every code before we leave. If a keypad fails after a power outage, it’s usually a lost memory setting, not a broken unit, and that’s often a fast fix.
Loop Detectors and Vehicle Sensors
Loop detectors are the buried wires that sense a car waiting at the gate. In Alamo Heights, those wires get hit by soil movement and root pressure as often as they do by lawn equipment. We test the loop’s resistance, locate breaks, and replace the loop when it’s beyond repair.
Trusted Brands We Service in Alamo Heights
We work on more than just the common opener brands: our techs are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Mighty Mule. For Alamo Heights specifically, we keep common Linear and Viking parts on the truck because we see those brands regularly in older homes and newer gate retrofits. If you have a DoorKing swing gate operator or a Viking slide gate, we already know the failure points and the right part numbers. That means fewer return trips and a faster fix when your gate is down.
Common Electric Gate Repair Problems We See in Alamo Heights Homes
- Live oak root pressure on gate posts. Alamo Heights has one of the highest concentrations of mature live oaks in the San Antonio metro, and their shallow, sprawling root systems routinely buckle gate post footings. When the post shifts, the gate leaf sags, the hinges bind, and the opener strains or strips gears.
- Rack and pinion misalignment on slide gates. A slide gate that stalls or grinds halfway across its track often has a rack that’s no longer parallel to the pinion gear. We see this in Alamo Heights when a post shifts even half an inch from root heave.
- Control board failures after thunderstorms. Power surges from summer storms in Alamo Heights are a common killer of LiftMaster, FAAC, and BFT control boards. The gate may work fine one day and refuse to respond the next.
- Intermittent keypad and loop detector failures. Underground wiring along Alamo Heights driveways gets stressed by soil movement and root growth. Symptoms are keypads that work sometimes, or a gate that won’t open for a car but does open with a remote.
Pricing for Electric Gate Repair in Alamo Heights, TX
Here’s what you can expect to pay for common repairs in Alamo Heights. Diagnostic service calls run $75 to $125, and that fee is credited toward the repair if you choose to proceed. Gate opener repairs run $180 to $340. Motor replacements run $220 to $380. Keypad and remote repairs run $140 to $260. Safety sensor and photocell replacements run $120 to $240. Loop detector replacements run $300 to $600 due to the driveway work involved. Every quote is written and agreed to before any work begins. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Alamo Heights
If you’re outside Alamo Heights or manage a property in a nearby city, our Electric Gate Repair in Alamo Heights team also covers Houston, San Antonio, Dallas, and Fort Worth. Dispatch is coordinated from our San Antonio office, and we schedule routes to keep travel time from eating into the job.
Serving Alamo Heights, TX - Our Local Coverage Area
We’re based in the Alamo Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Alamo Heights
The hinge post is where live oak root pressure shows up first in Alamo Heights. Roots push the footing out of level, the gate leaf sags, and the hinges and opener take abuse they weren’t designed for. We re-level the post and reset the gate so the repair actually holds. Call (903) 417-0793 and we’ll look at it.
Most repairs in Alamo Heights are done in one visit, typically 1 to 3 hours depending on the issue. If a part isn’t on the truck, we’ll give you a firm timeline for a return visit, and the second trip is already covered under your written quote.
It can be the photocell, but it can also be a misaligned rack, a binding hinge, or a failing gear. We test the photocell and the entire drive path before replacing anything, so you’re not paying for a part that wasn’t the problem. Call (903) 417-0793 for a straight diagnosis.
Yes. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Our techs are factory-familiar with all nine brands and carry replacement parts for the ones we see most often in Alamo Heights.
A power outage can wipe the keypad’s memory or damage the control board if a surge rode the same line. Sometimes it’s a quick reprogram. Sometimes the board is fried. We’ll test it and tell you which one you’re dealing with before quoting any work.
What Alamo Heights Homeowners Should Know About Gate Repair
Alamo Heights has one of the highest concentrations of mature live oaks in the San Antonio metro, and their shallow, sprawling root systems routinely buckle gate post footings and trip loop detector wiring along driveways in Alamo Heights. This problem is far less common in newer suburbs like Stone Oak, where the trees aren’t as large and the soil hasn’t had decades to shift. Here in Alamo Heights, a gate that worked for years can suddenly bind, stall, or refuse to close because the ground beneath it has moved just enough to throw everything out of alignment. That’s why we don’t just swap parts: we look at the post, the footing, the rack, and the wiring before we quote anything.
We got a call to a home in Alamo Heights where a LiftMaster slide gate operator had been stalling for weeks. The rack and pinion was misaligned because the post footing had shifted from live oak root pressure. We corrected the sag by re-leveling the post, realigned the rack and pinion, and tested the safety photocell. The gate has run smoothly for months since. That’s the kind of fix that doesn’t come from a generic part swap: it comes from knowing what Alamo Heights soil and tree roots actually do to a gate over time.
Key Takeaways for Alamo Heights Gate Owners
- Most electric gate repairs in Alamo Heights cost between $180 and $420, with loop detectors at the higher end.
- Live oak root heave is the number one cause of post misalignment and hinge binding in this neighborhood.
- Storm surges regularly fry control boards on LiftMaster, FAAC, and BFT openers.
- Every repair includes a written price before work starts, a written guarantee, and a free return visit if the repair fails within 365 days.
Call Calder Gate Repair for Electric Gate Repair in Alamo Heights
If your gate is stuck, stalling, or refusing to open in Alamo Heights, call (903) 417-0793 and talk to a live person right now. We’ll give you a trackable arrival time, a written price before anything is touched, and a repair backed by the 365-Day Done Right Promise. No surprises, no vague windows. Just a gate that works the way it should.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Alamo Heights with gate repair that’s quoted honestly and backed in writing.