Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Plantation
Electric gate repair in Plantation, FL typically runs $180 – $340 for most opener and control board fixes, with full operator replacements landing between $750 and $1,400 depending on the motor and gate weight. Most repairs are done in a single visit, and you’ll get a written price before we touch a single bolt. Call (903) 417-0793 and a live person answers 24/7, not a voicemail.
If you live off West Broward Boulevard, out near Jacaranda, or in the neighborhoods around Plantation Central Park, you already know how fast a gate can go from working to stuck. Humidity gets into control boards. Afternoon storms knock out loop detectors. And on this side of Broward County, the real culprit is often underground: post footings that settle in rain-heavy months and throw the whole track out of line. We know Plantation’s soil and storm patterns because we work here constantly.
Why Calder Gate Repair Is Plantation’s Preferred Electric Gate Repair Company
We’re the dedicated gate repair arm of the Relay Home Co. family, founded in 2009. Every technician we send to Plantation is background-checked, gets around in a uniform, and carries the three things we never soften: a written price before work starts, a written guarantee on every repair, and a free second visit if the repair fails within our 365-Day Done Right Promise window. That’s not a marketing line. It’s printed on the paperwork.
Plantation homeowners tell us the same thing again and again: they’ve called an electrician, a garage door company, or a general handyman, and nobody actually knows gate openers. We only do gates. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we show up, we’re factory-familiar with the equipment installed on your property, not learning it from a YouTube video in the truck.
You’ll also get a real arrival time. Not a four-hour window. Our dispatcher is a live human in the Relay office who can answer your call at 3 a.m. if that’s when the gate fails and you can’t get your car out of the driveway. We track our techs and give you a link so you can see exactly who’s coming and when.
Commercial Gate Operator in Plantation
A Commercial Gate Operator in Plantation is a heavier-duty motor and drive unit built for the gates at offices, warehouses, retail plazas, and medical buildings along roads like Pine Island Road or University Drive. These operators run longer cycles, more open/close events per day, and generally control larger, heavier gate leaves than the residential units we see on single-family driveways. That means the repair is different: it’s heat, duty-cycle, and the condition of the support loops, not just a burnt capacitor.
We see commercial operators in Plantation fail for three reasons, in order: first, the post footings settled and the gate binds; second, the loop detector stops recognizing vehicles and the gate sits open or refuses to open; third, the operator’s capacitor or motor windings give out after years of heat and humidity. A commercial repair in Plantation usually falls between $350 and $900 before replacement parts, though heavier operators with larger motors can exceed that when the drive assembly needs to be replaced.
Loop Detector Diagnostics and Replacement
When a commercial gate in Plantation won’t open for a car but opens for a keypad or remote, the problem is almost always the detection loop or the loop detector in the operator cabinet. We test the loop’s resistance first, then test the detector’s output. If the loop is broken, we rough-cut a new loop and re-set detector sensitivity to match the gate’s cycle.
Operator Capacity and Duty-Cycle Work
Many commercial properties in Plantation inherit a gate operator from a previous tenant that was never sized for the actual number of vehicles. An undersized motor overheats and shortens its own life. We carry mid- and heavy-duty operators and will tell you honestly if the cheaper fix is a full operator swap rather than another motor rebuild.
Automatic Gate Repair in Plantation
Automatic gate repair in Plantation means diagnosing and fixing the components that move the gate and keep it safe: the motor, the gearbox or hydraulic pump, the chain or rack and pinion, the control board, the keypad, the remote receiver, the safety photocells, and the reversal edge. When a Plantation homeowner calls us, the gate usually isn’t moving, is stalling, is reversing on its own, or won’t respond to the remote. We trace that symptom to the exact failed part before quoting anything.
Most residential automatic gate repairs in Plantation run between $180 and $340 for the service call, diagnosis, and common part replacements like limit switches, keypad wiring, remote receivers, or photocell alignment. Control board replacements run higher, from $300 to $600 depending on the brand and board. We’ll tell you the number before we order the part.
Control Board and Limit Switch Repair
Storm-related power surges are a regular cause of dead control boards in Plantation, particularly during afternoon lightning season. A board that powers on but won’t send a signal to the motor, or one that only opens but never closes, is a board-level issue in most cases. We check for blown relays, failed solder joints, and moisture intrusion before recommending repair or replacement.
Photocell and Reversal Edge Alignment
A modern automatic gate won’t run when its entrapment protection is out of alignment. If your gate closes on a car and doesn’t reverse, the reversals edge or photocells aren’t doing their job. That’s a safety problem, and we treat it as urgent even when the gate is opening and closing fine. We realign the photocells and test the reversal edge under load so the gate reverses on real contact, not just on paper.
Trusted Brands We Service in Plantation
Calder Gate Repair services the opener brands you’re likely to find on Plantation properties. We regularly work on FAAC hydraulic swing operators, BFT control boards and motors, and Linear residential slide gate units, along with LiftMaster and the other leading brands. Because we carry common parts for these brands in our vehicles, we can complete many Plantation repairs in a single trip rather than ordering and coming back a week later. That’s an enormous difference for a homeowner with a gate stuck open across the driveway overnight.
Common Electric Gate Repair Problems We See in Plantation Homes
- Post footing settlement and binding: Plantation’s low-lying, canal-adjacent lots keep post footings damp through the wet season. The ground shifts. The gate post tips a degree or two, the track misaligns, and the operator strains or reverses mid-cycle. The gate arm looks fine, but the fault is below grade.
- Lightning and surge-damaged control boards: Afternoon thunderstorm surges are common in Plantation. A nearby strike or brownout takes out control boards, keypads, and loop detectors. The gate powers on but won’t move, or opens and never closes.
- Photocell and reversal edge failures: The safety photocells or reversal edge get knocked out of alignment by lawn equipment, storms, or time, and the gate stops running entirely. A modern operator won’t run when its entrapment protection doesn’t check out, which is a good thing even though it feels like a breakdown.
- Remote and keypad receiver failures: Humidity and age kill the RF receivers and keypad membranes in Plantation. If the remote works from five feet but not from the street, or the keypad stops responding after rain, this is usually the culprit. We test the receiver, keypad output, and remote frequencies, and we fix or replace the failed part rather than guessing.
Pricing for Electric Gate Repair in Plantation, FL
A service call and diagnostic in Plantation runs $75 – $120, which is credited against the repair if you approve the work. Most residential opener and control board repairs run $180 – $340 before parts. Control board replacements, which often follow storm surges in Plantation, run $300 – $600. Full operator replacements run $750 – $1,400. Commercial operator work runs $350 – $900 before parts. The single biggest variable is whether the post footing needs work, which is common in Plantation’s low-lying lots: re-centering and re-anchoring an operator mount generally adds $120 – $250 to the repair. The written quote we hand you before anything starts is the number you pay. Nothing else. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Plantation
We serve Plantation and the surrounding Broward County communities, including Fort Lauderdale, Margate, Coconut Creek, and Pompano Beach. If you’re in one of these areas and deal with the same problems, Electric Gate Repair applies to your gate just as much as to our Plantation customers. For a detailed look at the local area, see Plantation and how we cover it.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Plantation
Check that nothing is blocking the safety photocells on either side of the gate opening, because in Plantation’s humidity and afternoon rain, photocells get fogged, knocked askew, or dusted with debris, and the gate correctly refuses to close. If the photocells are clean and aligned, the next likely culprits are the limit switch or the control board, which often fails after a storm surge. Call (903) 417-0793 and we’ll diagnose it over the phone or book a visit with a written quote before any work starts.
In Plantation, the most common reason a gate sags or drags is the post footing settling in the damp, low-lying soil, especially on canal-side lots where the ground stays wet through the wet season. That shifts the hinge post, which throws the gate out of plane and makes the operator strain or the gate bind. The fix is re-leveling the track or hinge side and re-anchoring the post, not just greasing the wheels or tightening the chain. Call us for an inspection and we’ll quote the below-grade work honestly.
A full electric gate installation is not a same-day job. It’s measured, engineered, and scheduled. In Plantation, that means evaluating the post footings (which often need new concrete or re-pour work given the soil), running the power and low-voltage wiring, setting the operator, mounting the safety photocells and reversal edges, testing entrapment protection, and programming the remotes and keypad. A typical single-gate residential install runs two to four days depending on the gate size, and we give you a written schedule and price before we order anything. For a free measure and estimate, call (903) 417-0793.
We service nine leading gate opener brands, including FAAC, BFT, Linear, LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Plantation gate runs on a different brand, we can still diagnose it and often repair it with sourced parts. Call (903) 417-0793 with the brand and model, and a live person can tell you what’s likely and when we can come out.
The safety photocells and reversal edge are the parts that make your gate stop and reverse when something, or someone, is in the way. If they’re misaligned, fogged, or old, the gate may not reverse on contact, and that’s a real safety failure. We test both the photocell pair and the reversal edge under load during every Plantation repair visit, and we show you what passed and what didn’t before we leave. If you’re not sure, call (903) 417-0793 and we’ll schedule a safety-system check. Free second visit if anything fails within the 365-Day Done Right Promise window.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Plantation, FL with electric gate repair and gate opener repair.