Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Round Rock
Our Gate Repair in Round Rock usually costs $180 – $470 for common fixes like sensor realignment, keypad replacement, or control board diagnosis, and most jobs are completed the same day we arrive. The bigger issue here isn’t always the motor. Round Rock’s blackland prairie clay is tough on gate hardware, shifting hinge posts and throwing alignment off long before a LiftMaster or FAAC operator actually fails. If your gate is dragging, stalling, or refusing to close, call (903) 417-0793 and a real person will answer, day or night.
Calder Gate Repair is the dedicated Electric Gate Repair team inside the Relay Home Co. family, and we serve Round Rock with background-checked, uniformed technicians who arrive with a live, trackable ETA. No four-hour windows. No phone tag. You’ll know who’s coming, when they’ll be there, and what the job costs before a single bolt is turned.
Why Calder Gate Repair Is Round Rock’s Preferred Electric Gate Repair Company
Round Rock homeowners call us because we treat a gate repair the way it actually is: a security project with a mechanical problem underneath. Nicolás Alvarez runs our team, and he built the process around one rule: diagnose the root cause, then quote it in writing before any work starts. That means when a gate off Gattis School Road drags halfway through its arc, we’re checking the hinge post before we sell you a motor. That kind of honesty is why Round Rock keeps our calendar full.
We answer our own phones, 24/7. Not a call center, not a chat bot. A person who knows gate openers and can book the appointment, update an ETA, or walk you through a quick reset. Our techs are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the brand on your gate isn’t a mystery to us. And every repair carries the 365-Day Done Right Promise: if the fix fails within a year, we come back free.
Gate Access Control in Round Rock
Gate Access Control in Round Rock means everything that decides who gets in and who waits at the curb: keypads, intercoms, remote controls, loop detectors, phone-based entry systems, and the wiring that ties them all together. When a keypad dies or a remote stops triggering the opener, the problem is rarely the gate itself. It’s the access hardware. In Round Rock, where a lot of newer subdivisions run on shared access points, a failed keypad can jam up an entire street’s entry flow by 7am. We fix the hardware that keeps the gate answering when you press the button.
Keypad and intercom troubleshooting
A keypad that works intermittently is usually a wiring connection gone loose from sun and rain exposure, or a keypad membrane that’s degraded after a few Texas summers. We test voltage at the keypad, trace the run back to the control board, and replace only what’s actually failed. Intercom and phone-entry systems get the same treatment: board diagnosis first, then a written quote for what needs replacing.
Loop detector and remote programming
Loop detectors buried under the driveway tell the gate when a car is waiting to exit. In Round Rock, where expansive clay shifts and resodding happens every spring, those loops crack or get cut more often than you’d expect. We replace the loop, verify sensitivity, and reprogram remotes in the same visit. Programming remotes in Round Rock typically runs $85 – $160 per visit, and the price is agreed before we start.
Commercial Gate Operator in Round Rock
Commercial Gate Operator work in Round Rock covers the heavier hardware on apartment complexes, business parks, and gated communities: slide gate operators, barrier arms, heavy-duty swing operators, and the safety systems required by code. These jobs are not same-day rush work. They’re measured, ordered, and scheduled properly. Round Rock commercial sites deal with grind from caliche grit blowing off construction lots and new builds, which chews through rack and pinion assemblies faster than a residential gate would ever see. We diagnose the operator, inspect the gate’s travel and safety edges, and provide a free measure and written price before any component order.
Operator replacement and safety compliance
Commercial operators in Round Rock need to meet current entrapment protection requirements: photo eyes, reversing edges, and audible alarms where code requires. When we replace an operator, we test every safety input and document the results. You get a digital invoice with before-and-after photos, and the number on the invoice matches the number you approved before we started.
Scheduled maintenance for property managers
Round Rock property managers keep our number for quarterly gate maintenance. We grease the rack, check limit switches, test the reversing edges, and catch small failures before they lock a resident out at midnight. A commercial gate operator replacement in Round Rock typically runs $1,800 – $4,600 depending on the operator class, gate weight, and site access. We assess first, quote clearly, and never start until you say go.
Trusted Brands We Service in Round Rock
Factory-familiar is not a marketing line for us. Our Round Rock techs work on FAAC swing operators, BFT slide motors, Linear control boards, and just about every other brand a Central Texas gate can carry. That includes LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common control boards, remotes, keypads, and photo eyes stocked locally for Round Rock jobs, so a straightforward part failure doesn’t turn into a two-week parts wait. Fast turnaround means we show up with the part, not just the diagnosis.
Common Electric Gate Repair Problems We See in Round Rock Homes
- Hinge post heave from expansive clay. Round Rock’s blackland prairie soil swells when wet and shrinks when dry, throwing swing gate posts out of plumb. The gate sags, drags, and stalls, even though the operator is perfectly fine.
- Control board damage from storm surges. Central Texas summer lightning doesn’t have to hit your gate directly. Voltage spikes from nearby strikes and power flickers cook control boards and loop detector circuits. We see a spike in board failures after every big storm line rolls through Round Rock.
- Photo eye misalignment from re-landscaping. Homeowners resod, regrade, or add stone around the driveway apron and knock the safety photocells out of alignment. The gate reverses or refuses to close, and the fix is often a ten-minute realignment, not a new board.
- Caliche grit grinding slide gate racks. Construction dust from new-build lots around Round Rock carries fine limestone grit that works its way into rack and pinion assemblies. Left untouched, it grinds the rack teeth down and overworks the operator until the motor burns out early.
Pricing for Electric Gate Repair in Round Rock, TX
Here’s what Round Rock homeowners should expect. A standard service call and diagnosis runs $75 – $120. Keypad replacement: $95 – $240. Remote control replacement or programming: $85 – $160 per visit. Photo eye realignment or replacement: $110 – $260. Control board replacement: $300 – $650. Gate motor or full operator replacement: $950 – $2,600 for residential, $1,800 – $4,600 for commercial. Hinge post sag correction from clay movement typically runs $250 – $600 depending on post size and access. Every quote is written and agreed before we start, and the invoice matches the door price. Call (903) 417-0793 for a free estimate on your specific gate.
We Also Serve Cities Near Round Rock
Calder Gate Repair covers the whole north Austin corridor. If you’re in Pflugerville, Hutto, Georgetown, or Cedar Park, our Electric Gate Repair in Round Rock team serves your area too. Same written pricing, same 365-Day Done Right Promise, same live person on the phone.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Round Rock
Not usually. Round Rock’s clay soil expands and contracts with every wet-dry cycle, and it steadily pushes hinge posts out of plumb. The gate sags, the arc drags, and the operator fights a load it was never designed to handle. Our tech was called to a neighborhood off Gattis School Road where a LiftMaster swing gate had started stalling halfway through its arc. The owner assumed the motor was dying. We checked the hinge post first, found it had heaved nearly an inch out of plumb from clay movement, and corrected the sag at the post before touching the operator. One visit, no new motor needed. The gate has run clean through two more wet seasons since. Post correction in Round Rock typically runs $250 – $600. Call (903) 417-0793 and we’ll diagnose it properly.
Yes. Any automatic gate in Round Rock should have working entrapment protection: photo eyes across the opening, reversing edges on the gate panel, and a system that reverses when it hits resistance. That’s not just code compliance; it’s the difference between a gate that stops and a gate that injures. If your gate doesn’t reverse when it meets resistance, or the photo eyes are misaligned after a re-landscape, treat that as a same-day repair priority. We test every safety input on every job and document the results. A photo eye realignment or replacement runs $110 – $260. Call (903) 417-0793 for an exact quote.
Calder Gate Repair is factory-familiar with nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Round Rock gate has a FAAC swing operator, a BFT slide motor, or a Linear control board, there’s no guessing involved. We know the wiring, the common failure points, and the replacement part numbers. That’s the whole point of being a specialist. Call (903) 417-0793 with your brand and model, and we’ll tell you what we can do today.
In most cases, yes. Keypad wiring, loop detector sensitivity, and remote programming are all accessible from the operator box and the driveway surface. We carry common keypads, remotes, and loop wire on our trucks for Round Rock stops, so one appointment usually means one repair. Keypad replacement runs $95 – $240, loop detector replacement $180 – $400, and remote programming $85 – $160. We check both systems in a single visit and quote the total before any part is ordered. Call (903) 417-0793 for a free estimate.
A full electric gate installation in Round Rock is a multi-day project, not a same-day job. Groundworks and post setting alone take a day or two, because the holes need to be dug below the clay’s active movement zone and backfilled correctly so the post doesn’t heave within two years. Then you’re running power, mounting the operator, installing the safety edges and photo eyes, and testing reversing sensitivity. Realistically, a residential installation runs three to five working days from first measure to final test, depending on material availability and weather. We give you a written price and schedule at the free measure, and the number doesn’t change. Call (903) 417-0793 to book yours.
Call Calder Gate Repair in Round Rock
If your Round Rock gate is sagging, stalling, refusing to close, or flashing an error on the keypad, don’t guess and don’t force it. Electric gates carry real force, and a misaligned or failing system is a safety issue best handled by a trained professional. Call (903) 417-0793 and a live person will book your appointment right now. You’ll get a written price before any work starts, the 365-Day Done Right Promise on every repair, and a free second visit if the fix ever fails within the year. That’s how gate repair should work in Round Rock.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Round Rock with dedicated gate repair and opener expertise.