Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Round Rock, TX
Calder Gate Repair is the gate company Round Rock homeowners call when a driveway gate stops cooperating. We handle everything from dead openers to gates that scrape, sag, or refuse to close. Round Rock’s mix of limestone-heavy soil, brutal summer heat, and HOA-governed communities creates a specific set of gate problems we see week after week. Whether you need a quick fix on a Mighty Mule opener in Teravista or a full electric gate overhaul in Forest Creek, you’ll get a written price before we touch a single bolt. Call (903) 417-0793 and a live person picks up.
Why Round Rock Homes Are Different
Round Rock gate jobs are shaped by three things: the heat, the soil, and the HOAs. The heat is relentless. From June through September, gates sit in 95+ degree sun for hours, and that cooks circuit boards, weakens plastic gear teeth, and shortens the life of batteries inside solar-powered openers. We routinely open control boxes in Round Rock and find capacitors bulging from thermal stress – something you see far less often in shaded neighborhoods or cooler climates.
The soil matters too. Much of Round Rock sits on clay-heavy ground that expands when wet and contracts when dry. That movement shifts gate posts over time, throwing off alignment so gates catch on the latch or drag across the driveway. Fixing the opener alone won’t help if the post has moved – which is why a real diagnosis matters here more than in cities with more stable soil.
And then there are the HOAs. Communities like Teravista, Paloma Lake, and Mayfield Ranch have rules about gate appearance, height, and sometimes even color. If you’re repairing a gate in a managed community, we’ll flag likely covenant concerns before work starts so you don’t get a letter from the board two weeks later.
Our Main Round Rock Services
Most Round Rock calls come down to three problems: a gate that won’t move at all, a gate with a failing electric drive system, or an opener that has stopped responding. Each service has its own dedicated page for Round Rock.
Gate Repair in Round Rock
Gate repair covers the physical gate itself: hinges, wheels, posts, pickets, latches, and the frame. In Round Rock we see a lot of sagging caused by the clay soil shifting posts, plus rusted hinges on older steel gates in neighborhoods built in the 1990s and early 2000s. A gate that drags on the driveway or won’t sit level usually needs mechanical attention, not a new opener. We’ll tell you which, in plain language, before any price is quoted. Gate Repair in Round Rock covers the full scope.

Electric Gate Repair in Round Rock
Electric gate repair involves the powered drive system: the motor, the control board, the safety edges, the keypad, and the wiring that ties it all together. Round Rock’s summer heat is hardest on these components. We see control boards fail in August that would have run fine for another five years in a cooler climate. If your keypad blinks but nothing moves, or the gate opens and immediately reverses, the issue is almost certainly in the electric drive, not the gate itself. Electric Gate Repair in Round Rock explains what’s involved.

Gate Opener Repair in Round Rock
Gate opener repair zeroes in on the operator itself: the arm, the gearbox, the limit switches – the small sensors that tell the gate when to stop – and the remote receiver. Round Rock homeowners call us most often about LiftMaster and Ghost Controls openers that run but won’t move the gate, usually a stripped gear or a broken belt. If the opener hums but the gate stays still, or the remote only works when you’re ten feet away, you need opener work. Gate Opener Repair in Round Rock covers the full detail.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Round Rock
Our techs carry factory-specific knowledge for most opener brands Round Rock homes actually use. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule all show up regularly here. We stock the most common replacement parts for these brands in our Austin metro inventory, which means most Round Rock repairs are finished the same day. See our brands for the full list.
Pricing for Gate Company in Round Rock, TX
| Service | Typical range in Round Rock |
|---|---|
| Gate opener repair (limit switch) | $180 – $260 |
| Gate opener repair (control board) | $250 – $450 |
| Gate opener gear replacement | $275 – $420 |
| Gate hinge replacement (pair) | $160 – $340 |
| Gate wheel replacement (V-track) | $150 – $300 |
| Electric gate safety edge replacement | $220 – $380 |
| Keypad replacement and programming | $120 – $250 |
| Gate push-to-open arm (single swing) | $850 – $1,300 |
| Full slide gate operator replacement | $1,600 – $2,800 |
What pushes a Round Rock job toward the top of these ranges? Old gates with seized hardware, long driveway runs that need extra wiring, and HOA communities where access or compliance adds time. Every price is quoted in writing before any work starts – the number you approve is the number on the invoice.
Neighborhoods We Serve in Round Rock
We work across the full Round Rock area, from the older established streets near downtown to the newer communities along the east side of I-35 and up toward the Williamson County line.
- Teravista
- Forest Creek
- Paloma Lake
- Mayfield Ranch
- Stone Canyon
Response time for the Round Rock area is usually same-day or next morning, depending on when you call and how many technicians are already routed your way.
Service Area – Cities Near Round Rock
If you’re just outside Round Rock, we also serve nearby communities. Our crews handle gate work in Pflugerville, TX, Hutto, TX, Georgetown, TX, and Cedar Park, TX. Live arrival tracking applies there too, same as it does in Round Rock.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Round Rock
Same-day service is common for Round Rock when you call before early afternoon. Evening calls typically shift to the next morning’s route. Our dispatch is coordinated from the Austin metro office, with crews routed to Round Rock jobs throughout the day. You’ll get a live, trackable arrival window – not a four-hour guess.
Many do, especially in communities like Teravista and Paloma Lake where gates face the street. Most HOAs only care about appearance: same height, same color, same material. We’ll flag any potential covenant issue before work begins so you can check your community guidelines. The repair itself usually doesn’t need HOA permission, but a full gate replacement might.
Yes. We route to every Round Rock ZIP code, from the older neighborhoods near I-35 to newer communities like Paloma Lake and Stone Canyon on the east side. Dispatch and scheduling are coordinated from our Austin office, and crews are assigned to Round Rock jobs locally when you book. Call (903) 417-0793 to confirm your address.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Round Rock Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.





Before
After
Before
After
Before
After