Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Four Corners, TX
When a gate stops opening in Four Corners, you don’t need a general handyman. You need someone who knows why Fort Bend County humidity corrodes circuit boards faster and why swing gates on older acreage lots fail differently than slide gates on newer subdivisions. Calder Gate Repair handles all of it: Gate Repair, Electric Gate Repair, and Gate Opener Repair across Four Corners. Each service has its own page so you can get straight to the specifics. If you need help right now, call (903) 417-0793 and a live person answers.
Why Four Corners Homes Are Different
Four Corners sits at the meeting point of Sugar Land, Stafford, Missouri City, and Houston’s southwestern edge. The housing stock here varies wildly: some homes date back to the 1970s with original iron gates welded to rail posts, while others sit in subdivisions built within the last decade with aluminum frames and modern opener systems.
That variation is the single biggest factor in how we approach a Four Corners job. An older Fort Bend County gate often has a chain-drive opener that’s been fighting the same humidity for 20 years. A newer one, especially in communities along Highway 90 or Murphy Road, usually runs a belt-drive or direct-drive unit from LiftMaster or Ghost Controls. Neither is harder for us, but they fail for different reasons, and the repair path differs. In the summer, we see more limit switch failures as heat expands rails and gate frames. In spring and fall, it’s more storm-related: water intrusion into control boards, misaligned photo eyes, and gates knocked off track by wind. Nico Alvarez and our Four Corners techs carry the parts that fail most often here, which is why most repairs are done the same visit rather than scheduled around a back-ordered part.
Our Main Four Corners Services
Most Four Corners calls come down to two things: a gate that won’t move or an opener that’s making noise and doing nothing. Here’s what each involves here.
Gate Repair in Four Corners
A gate off its track, sagging at the hinge, or scraping the driveway is a safety issue before it’s anything else. In Four Corners, we deal with a lot of heavy iron gates that shifted as clay soil expanded and contracted, pulling the post just enough to throw the gate out of square. Calder Gate Repair has the equipment to lift, realign, weld, and reinforce without a full replacement. Gate Repair in Four Corners covers what we fix, how we diagnose, and roughly what it costs.
Electric Gate Repair in Four Corners
Electric gates add components that mechanical gates don’t have: control boards, safety edges, photo eyes, loop detectors, and the wiring connecting them. Fort Bend County’s heavy rain and high heat both take a toll on these, and sometimes the issue is as simple as a lightning-struck board. Other times it’s a bad capacitor or a short in a corroded cable. Electric Gate Repair in Four Corners walks through how we troubleshoot and what a typical repair looks like, start to finish.
Gate Opener Repair in Four Corners
When the gate itself moves fine by hand but won’t move on its own, the opener is the problem. We work on units from LiftMaster, FAAC, Linear, Viking, Ghost Controls, and Mighty Mule every week in Four Corners. That brand familiarity matters: a DoorKing control board from 1998 and a 2023 Mighty Mule often fail in completely different ways, and knowing that on the first visit saves you time and money. Gate Opener Repair in Four Corners has the details by brand and symptom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Four Corners
Calder Gate Repair is factory-familiar with the openers Four Corners residents actually have: Linear, Viking, Ghost Controls, and DoorKing among them. We stock the most common replacement boards, remotes, and photo eyes locally, which usually means a repair gets done in one visit. See the full our brands list if you’re not sure what’s mounted on your post.
Pricing for Gate Company in Four Corners, TX
| Service | Typical range in Four Corners |
|---|---|
| Gate repair service call (with minor adjustments) | $125 – $190 |
| Gate opener repair (labor, no parts) | $245 – $380 |
| Control board replacement | $310 – $580 |
| Hinge repair or replacement | $180 – $420 |
| Gate wheel or roller replacement | $140 – $260 |
| Post reinforcement | $285 – $650 |
| Photo eye or safety sensor replacement | $165 – $310 |
| Full gate opener installation (opener not included) | $565 – $960 |
| Remote or keypad programming | $75 – $150 |
Two things push a Four Corners price up: a gate that’s badly out of square and needs more labor to realign, and older openers that require parts that aren’t made anymore, so we have to wire in a compatible board rather than a direct swap. Either way, the number we quote is the number on the invoice. We stand by the Relay Visibility Guarantee: you get a written price before any work starts, and the invoice never surprises you.
Neighborhoods We Serve in Four Corners
Calder Gate Repair covers the entire Four Corners area plus the adjacent pockets of Sugar Land, Stafford, and Missouri City that share the same postal routes and call themselves Four Corners for good reason.
- Four Corners POA communities
- Kelliwood Lakes
- Westmoor
- Lake Village
- The Grove
Most Four Corners calls are reached within 45 minutes during normal hours. Emergency calls are handled 24/7, and you’ll always get a live person on the phone with a real arrival window.
Service Area – Cities Near Four Corners
Four Corners is our focus, but we also route crews to nearby communities in the Houston, TX metro, including San Antonio, FL, Dallas, TX, and Fort Worth, TX. If you’re on the edge of Four Corners, or in a neighboring community, call (903) 417-0793 and we’ll confirm coverage and get you scheduled.
Serving Four Corners, TX - Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Four Corners
Normal calls in Four Corners are usually reached within 45 minutes, and emergency calls dispatch immediately with a live trackable arrival time. Our Four Corners techs carry the most common control boards, remotes, and photo eyes in their trucks, so most repairs get finished on the same visit. Call (903) 417-0793 and we’ll give you an exact window.
Most Four Corners communities care about the end result, not the repair itself. If your HOA requires approval for a gate replacement or a major visual change, that’s your responsibility, but a standard repair that restores the gate to working order is almost never an issue. We’ll provide a written summary of the work if your HOA asks for one.
Every Four Corners repair carries the 365-Day Done Right Promise: if the repair fails within 365 days, Calder Gate Repair returns at no charge. You also get a written price before any work starts, and a background-checked, uniformed technician with a live arrival time. No voicemail, no four-hour window.
If your gate isn’t opening, closing, or sounding the way it should, call Calder Gate Repair at (903) 417-0793 for a free estimate. You’ll get a straight answer, a written price, and a technician who knows Four Corners gates.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Four Corners Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.