Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Los Angeles?
Gate access control in Los Angeles typically costs $450 to $2,800 for a residential install, with most single-entry keypad and intercom systems landing between $650 and $1,400. Repairs and reprogramming run much less, usually $150 to $450 depending on the part. The wide range comes down to one thing: how many ways you want people to get in, and whether the gate opener itself is already in good shape.
We’re Calder Gate Repair, and access control is one of our three core services alongside Gate Access Control in Los Angeles and gate opener repair. Below is what the Los Angeles market actually charges in 2026, what pushes the number up, and how to keep the bill down without cutting corners.
Key Takeaways
- Most LA residential access control installs land in the $650 – $1,400 range.
- Keypad and phone-app entry are the cheapest upgrades; intercom and video run higher.
- Every Calder job starts with a written price before any work begins, backed by the 365-Day Done Right Promise.
- Repairing existing access hardware is usually far cheaper than replacing it – worth a free estimate first.
Gate Access Control Cost Breakdown (2026)
These are real Los Angeles ranges, not national averages. Prices assume an existing powered gate and a working gate opener.
| Service | Typical LA Price |
|---|---|
| Keypad entry (wired or wireless) | $220 – $550 |
| Telephone/intercom entry system | $550 – $1,300 |
| Video intercom with monitor | $900 – $2,100 |
| Smartphone app control module | $280 – $650 |
| Exit/loop sensor (safety reverse) | $180 – $420 |
| Card or fob reader (per door) | $400 – $1,100 |
| Multifamily or HOA controller (up to 20 units) | $1,600 – $4,500 |
| Full single-entry install, labor included | $650 – $1,400 |
| Diagnostic and reprogramming visit | $150 – $450 |
What moves you up or down: the number of entry points, whether wiring already exists, and whether your opener can accept a control module without an upgrade. A LiftMaster opener from the last decade often takes a smart module directly. Older units may need a new control board first, which adds a few hundred dollars.
What Affects Gate Access Control Pricing in Los Angeles
- Existing wiring. If a conduit run is already in place from the house to the gate, keypad and intercom installs are quick. If we have to trench or fish new wire across a driveway, expect to pay more, largely for labor. In hillside neighborhoods like Mount Washington and Studio City, trenching through hard-packed soil or rock takes longer than it does on the flats.
- Which opener you own. We’re factory-familiar with nine major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and control modules behave differently on each. A DoorKing system built for an apartment building accepts access hardware a household Mighty Mule won’t, which changes both the part and the labor.
- Entry method. A single keypad is the cheapest way in. Add an intercom, a camera, or fobs for the whole family and the price climbs. Most LA homeowners start with a keypad plus phone-app control and add video later if they want to see who’s at the gate.
- Coastal vs. inland climate. Near the coast – Santa Monica, Venice, the Palisades – salt air corrodes keypads, exposed wiring, and reader housings faster than it does inland. We mount coastal units with sealed enclosures, which adds a small amount up front but saves a repair in two or three years.
- Gate type and traffic. A single swing gate on a residential driveway is a simple setup. A sliding gate that a dozen cars cross an hour, or a double swing gate, needs heavier hardware and more careful sensor placement, and that shows up in the quote.
- Permits and HOA rules. Some Los Angeles properties, particularly in hillside and canyon areas, need a permit for gate electrical work, and many HOAs require access hardware to match the community’s aesthetic. We’ll tell you upfront if your address is likely to need a permit so there are no surprises mid-job.
How to Save on Gate Access Control
The single biggest saver is diagnosing before replacing. Plenty of “the keypad is dead” calls turn out to be a tripped breaker, a corroded terminal, or a control board that needs a reset. A diagnostic visit runs $150 – $450, and if a quick fix is all it needs, you’ve saved hundreds. We put that number in writing before we touch anything, and the price you agree to at the door is the price on the invoice.
A few more ways to trim the bill:
- Combine services. If your opener is also due for a tune-up, bundle it. One trip costs less than two.
- Start with a keypad, add smart control later. You can always add a phone-app module down the road without redoing the keypad.
- Ask for a free estimate. Calder Gate Repair offers free estimates, and a live person answers every call, 24/7 – call our home page team at (903) 417-0793 to book a trackable arrival time.
- Fix the opener first if it’s failing. Access hardware is only as reliable as the opener driving the gate.
How a Gate Access Control Install Works
- Free estimate and written quote. We walk the gate, check the opener, and hand you a written price before anything starts.
- Confirm wiring and power. We verify the existing low-voltage run or plan a new one.
- Mount the hardware. Keypad, intercom, or reader goes on the post or pillar, sealed against the weather.
- Wire and program. Codes, fobs, or app access get set up, and we test every entry method.
- Safety check. We test the reverse sensors and obstruction detection so the gate stops for a person or a car in its path.
- Digital invoice and photos. You get before-and-after photos and a digital invoice you pay from a link. If the repair fails within 365 days, we return at no charge under the 365-Day Done Right Promise.
FAQs – Gate Access Control Cost
How much does a keypad entry system cost in Los Angeles?
A single keypad entry system in Los Angeles runs $220 – $550 installed, or $650 – $1,400 as part of a full single-entry access setup with app control. The price depends on whether wiring already exists and which opener you have. Call (903) 417-0793 for an exact quote – estimates are free.
Is it cheaper to repair or replace my access control system?
Repair is almost always cheaper – usually $150 – $450 versus $650 – $1,400 for a new install. If the wiring and opener are sound, a repair or reprogramming gets you back up for a fraction of replacement cost. We’ll tell you honestly which makes sense for your gate.
Can you install gate access control the same day?
Many keypad and diagnostic jobs can be done the same day, while full intercom or multifamily installs are usually scheduled within a few days. We dispatch background-checked, uniformed technicians with a live, trackable arrival time, so you’re not stuck waiting in a four-hour window. Call (903) 417-0793 to book.
Why does access control cost more near the coast?
Salt air corrodes keypads, wiring, and reader housings faster, so coastal installs in Santa Monica, Venice, and the Palisades often use sealed enclosures and marine-grade hardware. That can add a modest amount up front but prevents a $300 repair two or three years later.
Do I need a permit for gate access control in Los Angeles?
Some hillside and canyon properties need an electrical permit for gate wiring, and most HOAs require access hardware to match community standards. We’ll flag it during your free estimate so the work passes inspection the first time. Call (903) 417-0793 to get started.
Get Your Written Price Before Any Work Starts
Whether it’s a single keypad or a full multifamily controller, Calder Gate Repair puts the price in writing before a bolt is turned, backs the work with the 365-Day Done Right Promise, and answers every call with a live person, day or night. We’re part of the Relay Home Co. family, independently owned, serving Los Angeles and the surrounding areas with upfront pricing and trackable, uniformed technicians. Call (903) 417-0793 for a free estimate on your gate access control.
Pricing reflects the Los Angeles market as of 2026. Calder Gate Repair offers free estimates – call (903) 417-0793.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Los Angeles since 2009.
What Our Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.