Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Clovis
A gate opener that won’t open, won’t close, or reverses for no reason usually comes down to one of three things: a failed limit switch, a worn capacitor, or a wiring fault. In Clovis, we see a fourth culprit more often than anywhere else we work: the soil itself. Calder Gate Repair fixes gate openers across Clovis, from Harlan Ranch to the neighborhoods off Willow and Bullard, usually within one business day of your call. If you’re stuck with a gate that won’t budge, call (903) 417-0793 and a live person answers, 24/7, ready to schedule a technician with a trackable arrival time.
Why Calder Gate Repair Is Clovis’s Preferred Gate Opener Repair Company
We’re a dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009 and independently owned and operated. That means we don’t split our attention between garage doors, fencing, and everything else. Gate openers are what we do. Our technicians are factory-familiar with nine major brands, including Viking, Ghost Controls, and DoorKing, so when a Clovis homeowner calls about a Viking operator that hums but won’t engage, we don’t show up to learn on the job.
Every Calder technician arrives in uniform, background-checked, with a live arrival time you can track from your phone, not a four-hour window. Before any work starts, you get a written price. The number on the invoice is the number you agreed to at the door. That’s not a courtesy; it’s how we’ve operated since day one.
Clovis residents see a lot of gate opener companies come through town. The difference with Calder is what happens after we leave. Every repair carries our 365-Day Done Right Promise: if the repair fails within 365 days, we come back and fix it at no charge, in writing, on every job. No fine print, no “well, that’s a different part.” If it’s not done right, Calder makes it right.
Electric Gate Closers in Clovis
Electric Gate Closers in Clovis are the hydraulic or electro-mechanical arms that pull a swing gate shut and hold it there, and in a valley where summer afternoon wind kicks dust and debris against your gate track, they work hard. When a Clovis homeowner calls us about an electric gate closer, the failure is rarely the arm itself. It’s usually the closer’s internal spring that’s lost tension from constant use in fine silt, or a mounting bracket that’s loosened from the gate leaf flexing against shifted post footings.
A typical electric gate closer repair in Clovis runs $220 to $480, depending on whether we’re replacing the closer, rebuilding the bracket, or both. If the closer is salvageable, a tension adjustment and lubrication runs $120 to $180. We quote that price before we turn a wrench.
Closer Replacement and Alignment
When a closer is beyond repair, we replace it with a unit rated for your gate’s weight and leaf length. Then we align the gate so the closer isn’t fighting a hinge post that’s out of plumb. In Clovis, that alignment step is not optional. Expansive clay moves posts here, and a new closer on a heaving post will fail again within a season.
Closer Speed and Latching Adjustments
If your gate slams shut or drifts open after it closes, the closer’s speed valves or latching mechanism need adjustment. We set both so the gate closes firmly but doesn’t bang, then test the latching under load. This is a 30- to 45-minute job on most Clovis properties and usually runs $95 to $150.
Gate Servicing in Clovis
Gate Servicing in Clovis means a full check of the operator, hinges, rollers, safety edges, loop detectors, and power feed on a swing or slide gate, done on a schedule so you don’t have breakdowns. Most Clovis homeowners call us for servicing after a gate fails, but the ones who schedule annual service call us far less often. And here’s what’s specific to Clovis: servicing has to look underground, not just at the operator.
Loop detector wiring in this area runs through soil that gets soaked by Valley irrigation runoff and sprinkler overspray. That moisture corrodes the wire jackets, which causes phantom triggers and gates that won’t stay closed. A proper service visit tests the loop field, checks the post footings for heave, and exercises the operator through a full cycle under load. A standard gate service in Clovis runs $180 to $260. If we find a failed loop detector and need to cut and splice a new loop into the driveway, that’s an additional $350 to $600 depending on the loop size and surface.
Annual Service Plans for Clovis Properties
We offer scheduled servicing for Clovis homeowners who want their gate treated like the mechanical asset it is. One visit a year, timed before the summer heat sets in, catches the small failures before they strand you outside your own house. We inspect the clutch, gearbox, chain or belt tension, safety edges, and power supply, then log everything in a digital report you get on the spot.
Post-Failure Service and Diagnostics
If your gate operator died and you’re not sure whether it’s the board, the motor, or the wiring, a diagnostic service call in Clovis runs $95 to $150. That fee covers a full inspection and a written quote. If you approve the repair, we apply the diagnostic fee toward the repair total. No surprise charges, no invoice games.
Trusted Brands We Service in Clovis
We stock common parts for Viking, Ghost Controls, and DoorKing operators in our local service vehicles, which means most Clovis repairs don’t wait on a parts shipment. Viking slide gate operators are popular on the ranchette properties east of Clovis Avenue, and their capacitor failures are quick for us to diagnose because we’ve seen hundreds of them. Ghost Controls swing arms show up on a lot of newer Harlan Ranch homes, and DoorKing operators are common on the commercial and multi-family gates along Herndon. If you own a different brand, call anyway. We service nine major opener brands and can tell you over the phone whether we stock what yours needs.
Common Gate Opener Repair Problems We See in Clovis Homes
- Phantom triggers and gates that won’t close: This is usually a loop detector wiring fault. In Clovis, irrigation overspray and alkaline soil corrode the wire jacket over time, and the system reads the damage as a vehicle, holding the gate open or reversing mid-cycle.
- Hinge post heaving and gate misalignment: The expansive clay under Clovis swells and shrinks with moisture and summer heat. A post that’s moved even an inch changes the gate’s closing arc, and the operator’s safety logic sees that resistance as an obstruction and reverses. You think the motor is failing. The real failure is underground.
- Logic board resets from voltage sag: On triple-digit afternoons when every AC unit in Clovis is running, voltage can sag enough to glitch a gate operator’s control board. The gate loses its limits, forgets its remote codes, or just stops responding. We check the board’s power supply before we condemn the motor.
- Stripped or seized drive gears: Dust from the surrounding farmland is fine enough to get past seals and into the operator’s gearbox. Over time, that grit wears the drive gear teeth down. A seized gearbox often sounds like a dead motor, but the fix is a gear replacement, not a motor swap.
Pricing for Gate Opener Repair in Clovis, CA
Most gate opener repairs in Clovis run between $180 and $450 before parts. The low end is a limit switch replacement, a remote receiver reprogram, or a clutch adjustment. The high end is a full control board replacement or a gearbox rebuild. If the motor itself is dead, a replacement motor with labor typically lands between $600 and $1,100 depending on the operator model. Every job gets a written quote before work begins, and that quote is the price you pay. If the repair includes a part that fails within 365 days, we return and fix it free under the 365-Day Done Right Promise. Call (903) 417-0793 for a free estimate over the phone, and we’ll give you a real number, not a range with fine print.
We Also Serve Cities Near Clovis
If you’re just outside Clovis or work in a neighboring city, our Gate Opener Repair in Clovis service area extends to Fresno, Sanger, Fowler, and Madera. Dispatch and scheduling are coordinated from our Fresno, Central Valley office, and crews serve Clovis locally, so a technician who knows the valley’s soil and heat patterns is never far away.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Clovis
In Clovis, the most common cause is a hinge post that has heaved out of plumb in the expansive clay soil, which makes the operator sense resistance and reverse as a safety response. The second most common cause is a cracked or dirty safety photocell, often damaged by a lawn edger or coated in valley dust. We check both before we touch the operator itself. Call (903) 417-0793 and we’ll diagnose it over the phone in five minutes.
Yes. California law requires entrapment protection on all automatic gates, and that includes Clovis residential properties. That means working safety reversing edges or photo eyes, a properly rated operator, and correct limits on travel force. If your gate predates current standards and lacks entrapment protection, we can add it without replacing the entire operator in most cases.
Usually not. A sagging gate in Clovis is often a hinge post or gate leaf leaning because the clay soil has shifted underneath it. We reset the post footing, re-hang the leaf, and in most cases the gate closes cleanly again. Replacement is a last resort, and we’ll show you exactly why it’s needed before recommending it. The written quote you get reflects what we actually find, not a guess.
Most common repairs, like a limit switch, capacitor, or photocell replacement, are completed in 60 to 90 minutes on site. A control board or gearbox rebuild may take two to three hours. If parts are needed and we don’t have them on the truck, we’ll tell you before you commit, and we’ll schedule the return visit with a trackable arrival window.
We service nine major gate opener brands, including Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. Our technicians are factory-familiar with each brand’s failure patterns, so a Viking capacitor issue in Clovis gets diagnosed fast because we’ve seen it hundreds of times. If you’re not sure what brand you own, send us a photo and we’ll identify it over the phone.
When your gate opener quits, every hour it’s stuck open is an hour your property isn’t secure. And when it’s stuck closed, you’re not getting the car out. Call Calder Gate Repair at (903) 417-0793. A live person answers, we’ll give you a straight price range over the phone, and we’ll get a uniformed, background-checked technician to your Clovis home with a written quote before any work starts. Estimates are free, and every repair carries the 365-Day Done Right Promise in writing.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Clovis and the Central Valley.